NOTES: FTSH-1XX-XX-XXX-DV-XXX-XXX REVISION FE C 1. REPRESENTS A CRITICAL DIMENSION. OPTIONS 2. PARTS MAY BE CUT TO POSITION. No OF POSITIONS -P: PICK & PLACE PAD (4 POS MIN) 3. MAXIMUM CUT FLASH: .015 0.38 , -02 THRU -50 (SEE FIG 11, SHT 4 & TABLE 5) LOOSE FLASH MUST BE REMOVED. (PER ROW) DO NOT -TR: TAPE & REEL PACKAGING 4. MINIMUM PUSHOUT FORCE: 1.0 LB. SCALE FROM -ES: END SHROUDS (SEE FIG 6, SHT 3) 5. MEASURED AT BEND RADIUS, NOT AT END OF PIN. LEAD STYLE THIS PRINT (MOLDED IN 5 POS MIN -02 & -03 LEAD STYLE ONLY) 6. TUBE ONLY -04 THROUGH -50 POSITIONS (SEE TABLE 2). -01: .120 3.05 (SNAP SHROUDS 9 POS MIN -02 & -03 LEAD STYLE ONLY) 7. SHEAR TAILS TO DIMENSION SHOWN. -02: .075 1.91 -EJ: EJECTOR SHROUDS: SEE FIG 4, SHT 2) 8. MAXIMUM BURR ALLOWANCE: .003 0.08 -03: .065 1.65 (10 POS MIN -01 LEAD STYLE ONLY) 9. GOLD PLATING TO BE ON POST, TIN PLATING TO BE ON TAIL. -04: .150 3.81 -EJM: EJECTOR SHROUDS WITH MOLDED ALIGNMENT PIN 10. FILL WITH ALIGNMENT PIN HOLES TO TAIL SIDE. -05 .170 4.32 (SEE FIG 5, SHT 2 10 POS MIN -01 LEAD STYLE ONLY) 11. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, LOCKING CLIPS -14: .150 3.81 (NOT AVAILABLE (NOT VALID WITH -A OPTION) ARE NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS WITH -SM, FM, LM PLATING -EJC: EJECTOR SHROUDS WITH LOCKING CLIP MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH LOCKING CLIPS. OPTIONS) (SEE FIG 5, SHT 2 & NOTE 11) 12. VOIDS MAY OR MAY NOT BE PRESENT ON POSITIONS 5 THRU 8 AND CAN (10 POS MIN -01 LEAD STYLE ONLY NOT VALID WITH -A BE MIXED WITHIN AN ORDER. OPTION) PLATING SPECIFICATION 13. ON LEAD STYLES -02 THROUGH -03 THE T-1S15-18-XXX CAN -EC: LOCKING CLIP (SEE FIG 7, SHT 3 & NOTE 11) BE SUBSTITUTED FOR T-1S15-16-XXX. -L: 10 SELECTIVE GOLD IN CONTACT AREA, (9 POS MIN -02 & -03 LEAD STYLE ONLY) 14. ON LEAD STYLES -01 AND -04, T-1S15-17 CAN BE MATTE TIN ON TAIL -EP: GUIDE POST (SEE FIG 8, SHT 3 9 POS MIN -02 & -03 LEAD STYLE SUBSTITUTED FOR T-1S15-15-XXX. -F: 3 SELECTIVE GOLD IN CONTACT AREA, ONLY)(USE ONLY WHEN MATING WITH CLP) 15. NO TIN PLATING ALLOWED ON THE POST FOR MATTE TIN ON TAIL -EL: BOARD LOCK (SEE FIG 9, SHT 3) LEAD STYLES -01, -02, -03 & -04 IN COMBINATION WITH THE (9 POS MIN -02 & -03 LEAD STYLE ONLY) -S: 30 SELECTIVE GOLD IN CONTACT AREA, T-1S15-XX-XXX TERMINAL. (USE ONLY WHEN MATING WITH CLP) MATTE TIN ON TAIL -EPC: GUIDE POST & LOCKING CLIP -H: 30 GOLD IN CONTACT AREA, (SEE FIG 10, SHT 3 & NOTE 11 USE ONLY WHEN MATING WITH CLP) C 3 GOLD ON TAIL (9 POS MIN -02 & -03 LEAD STYLE ONLY NOT VALID +.005 +0.13 -LM: 10 SELECTIVE GOLD IN CONTACT AREA, No OF POS x .0500 -.010 -0.25 WITH -A OPTION) MATTE TIN ON TAIL -A: ALIGNMENT PIN (MOLDED OR STAKED SEE FIG 3, SHT 2) (No OF POS x .0500 1.27 ) - .050 1.27 -FM: 3 SELECTIVE GOLD IN CONTACT AREA, (MOLDED: 3 POS MIN STAKED: 6 POS MIN) MATTE TIN ON TAIL (SAMTEC DISCRETION ON WHICH -A PIN USED) 02 50 -K: KEYING OPTION FOR MATING WITH FFSD -SM: 30 SELECTIVE GOLD IN CONTACT AREA, (SEE TABLE 3, SHT 2 05 THRU 25 AVAILABLE AS STANDARD) MATTE TIN ON TAIL (POSITION 13, 17, 20 & 25 AVAILABLE WITH -EJ OPTION) -LTL: 10 SELECTIVE GOLD IN CONTACT AREA, (LEAD STYLE -01 ONLY, SEE FIG 2, SHT 2 & NOTE 12) TIN/LEAD (90/10+/-5%) TAIL (ALIGNMENT PIN AVAILABLE WITH -K OPTION BUT MUST BE MOLDED) -G: 10 GOLD IN CONTACT AREA, .135 3.43 (MUST USE FTSH-50-CN-XX-X OR FTSHC-50-CN-XX-X) 3 GOLD ON TAIL -M: METAL PICK & PLACE PAD (5 POS MIN USE MPP-22-5) REF * (SEE FIG 12, SHT 4 NOT AVAILABLE WITH -K OPTION) TAIL OPTION -DV: DOUBLE VERTICAL 49 01 POLARIZING OPTION FTSH-50-D 2 MAX SWAY XXX INDICATES POSITION TO BE OMITTED (EITHER DIRECTION) (NOT AVAILABLE WITH EXX OPTIONS) C .016 0.41 SQ 2 MAX SWAY (ONLY AVAILABLE WITH -F, -FM, -L, -LM PLATING OPTIONS) REF (TYP) .050.008 1.270.20 (EITHER DIRECTION) * = NOT ENGINEERING APPROVED SEE TABLE 1 2 MAX SWAY (EITHER DIRECTION) C 903 CONTACT AREA C (SEE NOTE 9 & TABLE 1) +.005 +0.13 .099 2.51 .115 2.92 -.003 -0.08 REF (SEE NOTE 5) SEE NOTE 3 .004 .10 (2 PLCS) FIG 1 PATENT NUMBERS .23 5.8 .230 5.84 REF 5713755 / 5961339 FTSH-1XX-XX-XXX-DV SHOWN SEE NOTE 8 (SEE NOTE 7) HAND FILL USING T-1S40 PROPRIETARY NOTE * * UNLESS OTHERWISE SPECIFIED, THIS DOCUMENT CONTAINS CONFIDENTIAL AND DIMENSIONS ARE IN INCHES. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR .XX: .01 .3 1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .XXX: .005 .13 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS .XXXX: .0010 .025 WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 5:1 DESCRIPTION: .050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIP INSULATOR: LCP UL 94 VO TERMINAL: PHOSPHOR BRONZE DWG. NO. FTSH-1XX-XX-XXX-DV-XXX-XXX * = SEE NOTE 13 *** = SEE NOTE 14 BY: PURVIS 10/12/1995 SHEET OF1 5 F: DWG MISC MKTG FTSH-1XX-XX-XXX-DV-XXX-XXX-MKT.SLDDRWFIG 4 FIG 2 SCALE 2 : 1 REVISION FE -K OPTION -EJ OPTION (LEAD STYLE -01 ONLY) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) (-01 LEAD STYLE ONLY) (POSITION 13, 17, 20 & 25 AVAILABLE WITH -EJ OPTION) USE SUB-FTSH-EJEHA .222 5.65 ((No OF POS x .0500 1.270 ) (2 REQ D PER ASSEMBLY, EACH REF +.005 +0.127 USES 1 EHA-02 & 1 FTSH-EJ) - .003 .08 ) 12.700 -.010 -0.254 02 .135 3.43 .440 11.18 REF REF 01 (No OF POS x .050 1.27 )+.621 15.77 C L .085 2.16 REF .010 0.25 C .200 5.08 REF (No OF POS x .050 1.27 )+.772 19.61 REF .126 3.20 REF FTSH-50-D .392 9.96 REF SEE NOTE 12 FTSH-50-CN-XX-X OR FTSHC-50-CN-XX-X -EJ OPTION (SHROUDS OPEN) .076 1.93 REF FIG 3 FIG 5 -A OPTION SCALE 2 : 1 (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) -EJC & -EJM OPTIONS (6 POSITION MINIMUM FOR STAKED ALIGNMENT PINS) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 4) (3 POSITION MINIMUM FOR MOLDED ALIGNMENT PINS) (-01 LEAD STYLE ONLY) C USE SUB-FTSH-EJEHA-A L USE SUB-FTSH-EJEHA (2 REQ D PER ASSEMBLY, EACH FTSH-50-D (2 REQ D PER ASSEMBLY, EACH USES 1 EHA-02 & 1 FTSH-EJ-A) (SEE NOTE 10) C C L USES 1 EHA-02 & 1 FTSH-EJ) L .034 0.86 C SM-A9H (No OF POS - 2) x .050 1.27 .035 0.89 REF C 2 MAX SWAY (STAKED ALIGNMENT PINS) LC-05-TM (EITHER DIRECTION) .05 1.3 -EJM -EJC .035 0.89 REF .010 0.25 REF C REF L -EJC -EJM +.005 +0.13 FTSH-50-D-XX .085 2.16 -.000 0.00 PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, .034 0.86 MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 .050 1.27 REF REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 (No OF POS - 2) DESCRIPTION: x .050 1.27 .035 0.89 DO NOT SCALE DRAWING FULL R .050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIP REF DWG. NO. SHEET SCALE: 3:1 (MOLDED ALIGNMENT PINS) FTSH-1XX-XX-XXX-DV-XXX-XXX F: DWG MISC MKTG FTSH-1XX-XX-XXX-DV-XXX-XXX-MKT.SLDDRW BY: PURVIS 10/12/1995 SHEET OF2 5