NOTES: FTSH-1XX-XX-XXX-DV-XXX-XXX REVISION FB C 1. REPRESENTS A CRITICAL DIMENSION. OPTIONS 2. PARTS MAY BE CUT TO POSITION. No OF POSITIONS -P: PICK & PLACE PAD (4 POS MIN) 3. MAXIMUM CUT FLASH: .015 0.38 , -02 THRU -50 (SEE FIG 11, SHT 4 & TABLE 5) LOOSE FLASH MUST BE REMOVED. (PER ROW) -TR: TAPE & REEL PACKAGING 4. MINIMUM PUSHOUT FORCE: 1.0 LB. -ES: END SHROUDS (SEE FIG 6, SHT 3) 5. MEASURED AT BEND RADIUS, NOT AT END OF PIN. LEAD STYLE DO NOT (MOLDED IN 5 POS MIN -02 & -03 LEAD STYLE ONLY) 6. TUBE ONLY -04 THROUGH -50 POSITIONS (SEE TABLE 2). SCALE FROM -01: .120 3.05 (SNAP SHROUDS 9 POS MIN -02 & -03 LEAD STYLE ONLY) 7. SHEAR TAILS TO DIMENSION SHOWN. -02: .075 1.91 THIS PRINT (MUST USE FTSH-50-D) 8. MAXIMUM BURR ALLOWANCE: .003 0.08 -03: .065 1.65 -EJ: EJECTOR SHROUDS: SEE FIG 4, SHT 2) 9. GOLD PLATING TO BE ON POST, TIN PLATING TO BE ON TAIL. -04: .150 3.81 (10 POS MIN -01 LEAD STYLE ONLY)(MUST USE FTSH-50-D) 10. FILL WITH ALIGNMENT PIN HOLES TO TAIL SIDE. -05 .170 4.32 -EJM: EJECTOR SHROUDS WITH MOLDED ALIGNMENT PIN 11. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, LOCKING CLIPS -14: .150 3.81 (NOT AVAILABLE (SEE FIG 5, SHT 2 10 POS MIN -01 LEAD STYLE ONLY) ARE NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS WITH -SM, FM, LM PLATING (NOT VALID WITH -A OPTION)(MUST USE FTSH-50-D) MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH LOCKING CLIPS. OPTIONS) -EJC: EJECTOR SHROUDS WITH LOCKING CLIP 12. VOIDS MAY OR MAY NOT BE PRESENT ON POSITIONS 5 THRU 8 AND CAN (SEE FIG 5, SHT 2 & NOTE 11) BE MIXED WITHIN AN ORDER. (10 POS MIN -01 LEAD STYLE ONLY NOT VALID WITH -A PLATING SPECIFICATION 13. ON LEAD STYLES -02 THROUGH -03 THE T-1S15-18-XXX CAN OPTION) BE SUBSTITUTED FOR T-1S15-16-XXX. -L: 10 SELECTIVE GOLD IN CONTACT AREA, (MUST USE FTSH-50-D) 14. ON LEAD STYLES -01 AND -04, T-1S15-17 CAN BE MATTE TIN ON TAIL -EC: LOCKING CLIP (SEE FIG 7, SHT 3 & NOTE 11) SUBSTITUTED FOR T-1S15-15-XXX. -F: 3 SELECTIVE GOLD IN CONTACT AREA, (9 POS MIN -02 & -03 LEAD STYLE ONLY)(MUST USE FTSH-50-D) 15. NO TIN PLATING ALLOWED ON THE POST FOR MATTE TIN ON TAIL -EP: GUIDE POST (SEE FIG 8, SHT 3 9 POS MIN -02 & -03 LEAD STYLE LEAD STYLES -01, -02, -03 & -04. ONLY) -S: 30 SELECTIVE GOLD IN CONTACT AREA, (USE ONLY WHEN MATING WITH CLP)(MUST USE FTSH-50-D) MATTE TIN ON TAIL C -EL: BOARD LOCK (SEE FIG 9, SHT 3) -H: 30 GOLD IN CONTACT AREA, +.005 +0.13 (9 POS MIN -02 & -03 LEAD STYLE ONLY) No OF POS x .0500 3 GOLD ON TAIL -.010 -0.25 (USE ONLY WHEN MATING WITH CLP)(MUST USE FTSH-50-D) -LM: 10 SELECTIVE GOLD IN CONTACT AREA, -EPC: GUIDE POST & LOCKING CLIP (No OF POS x .0500 1.27 ) - .050 1.27 MATTE TIN ON TAIL (SEE FIG 10, SHT 3 & NOTE 11 USE ONLY WHEN MATING WITH CLP) -FM: 3 SELECTIVE GOLD IN CONTACT AREA, (9 POS MIN -02 & -03 LEAD STYLE ONLY NOT VALID 02 50 MATTE TIN ON TAIL WITH -A OPTION)(MUST USE FTSH-50-D) -A: ALIGNMENT PIN (MOLDED OR STAKED SEE FIG 3, SHT 2) -SM: 30 SELECTIVE GOLD IN CONTACT AREA, (MOLDED: 3 POS MIN STAKED: 6 POS MIN) MATTE TIN ON TAIL (SAMTEC DISCRETION ON WHICH -A PIN USED) -LTL: 10 SELECTIVE GOLD IN CONTACT AREA, (MUST USE FTSH-50-D) .135 3.43 TIN/LEAD (90/10+/-5%) TAIL -K: KEYING OPTION FOR MATING WITH FFSD REF -G: 10 GOLD IN CONTACT AREA, (SEE TABLE 3, SHT 2 05 THRU 25 AVAILABLE AS STANDARD) 3 GOLD ON TAIL (POSITION 13, 17, 20 & 25 AVAILABLE WITH -EJ OPTION) (LEAD STYLE -01 ONLY, SEE FIG 2, SHT 2 & NOTE 12) TAIL OPTION (ALIGNMENT PIN AVAILABLE WITH -K OPTION BUT MUST BE MOLDED) (MUST USE FTSH-XX-CN-XX) 01 49 -DV: DOUBLE VERTICAL -M: METAL PICK & PLACE PAD (5 POS MIN USE MPP-22-5) * (SEE FIG 12, SHT 4 NOT AVAILABLE WITH -K OPTION) FTSH-50-D 2 MAX SWAY (EITHER DIRECTION) POLARIZING OPTION XXX INDICATES POSITION TO BE OMITTED 2 MAX SWAY (NOT AVAILABLE WITH EXX OPTIONS) C .016 0.41 SQ (EITHER DIRECTION) (ONLY AVAILABLE WITH -F, -FM, -L, -LM PLATING OPTIONS) REF (TYP) .050.008 1.270.20 SEE TABLE 1 * = NOT ENGINEERING APPROVED 2 MAX SWAY (EITHER DIRECTION) C 903 CONTACT AREA C (SEE NOTE 9 & TABLE 1) +.005 +0.13 .099 2.51 .115 2.92 -.003 -0.08 REF (SEE NOTE 5) SEE NOTE 3 .004 .10 (2 PLCS) FIG 1 PATENT NUMBERS .23 5.8 .230 5.84 REF 5713755 / 5961339 FTSH-1XX-XX-XXX-DV SHOWN SEE NOTE 8 (SEE NOTE 7) HAND FILL USING T-1S40 PROPRIETARY NOTE * * UNLESS OTHERWISE SPECIFIED, THIS DOCUMENT CONTAINS CONFIDENTIAL AND DIMENSIONS ARE IN INCHES. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR .XX: .01 .3 1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .XXX: .005 .13 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS .XXXX: .0010 .025 WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 5:1 DESCRIPTION: .050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIP INSULATOR: LCP UL 94 VO TERMINAL: PHOSPHOR BRONZE DWG. NO. FTSH-1XX-XX-XXX-DV-XXX-XXX * = SEE NOTE 13 *** = SEE NOTE 14 BY: PURVIS 10/12/1995 SHEET OF1 5 F: DWG MISC MKTG FTSH-1XX-XX-XXX-DV-XXX-XXX-MKT.SLDDRWFIG 4 FIG 2 SCALE 2 : 1 REVISION FB -K OPTION -EJ OPTION (LEAD STYLE -01 ONLY) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) (-01 LEAD STYLE ONLY) (POSITION 13, 17, 20 & 25 AVAILABLE WITH -EJ OPTION) USE SUB-FTSH-EJEHA .222 5.65 ((No OF POS x .0500 1.270 ) (2 REQ D PER ASSEMBLY, EACH REF - .003 .08 ).006 0.15 USES 1 EHA-02 & 1 FTSH-EJ) 02 .135 3.43 .440 11.18 REF REF 01 (No OF POS x .050 1.27 )+.621 15.77 C L .085 2.16 REF .010 0.25 C .200 5.08 REF (No OF POS x .050 1.27 )+.772 19.61 REF .126 3.20 REF FTSH-50-D .392 9.96 REF FTSH-50-CN-XX SEE NOTE 12 -EJ OPTION (SHROUDS OPEN) .076 1.93 REF FIG 3 FIG 5 -A OPTION SCALE 2 : 1 (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) -EJC & -EJM OPTIONS (6 POSITION MINIMUM FOR STAKED ALIGNMENT PINS) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 4) (3 POSITION MINIMUM FOR MOLDED ALIGNMENT PINS) (-01 LEAD STYLE ONLY) C USE SUB-FTSH-EJEHA-A L USE SUB-FTSH-EJEHA (2 REQ D PER ASSEMBLY, EACH FTSH-50-D (2 REQ D PER ASSEMBLY, EACH USES 1 EHA-02 & 1 FTSH-EJ-A) (SEE NOTE 10) C C L USES 1 EHA-02 & 1 FTSH-EJ) L .034 0.86 C SM-A9H (No OF POS - 2) x .050 1.27 .035 0.89 REF C 2 MAX SWAY (STAKED ALIGNMENT PINS) LC-05-TM (EITHER DIRECTION) .05 1.3 -EJM -EJC .035 0.89 REF .010 0.25 REF C REF L -EJC -EJM +.005 +0.13 FTSH-50-D-XX .085 2.16 -.000 0.00 PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, .034 0.86 MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 .050 1.27 REF REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 (No OF POS - 2) DESCRIPTION: x .050 1.27 .035 0.89 DO NOT SCALE DRAWING FULL R .050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIP REF DWG. NO. (MOLDED ALIGNMENT PINS) SHEET SCALE: 3:1 FTSH-1XX-XX-XXX-DV-XXX-XXX F: DWG MISC MKTG FTSH-1XX-XX-XXX-DV-XXX-XXX-MKT.SLDDRW BY: PURVIS 10/12/1995 SHEET OF2 5