F-215 (0,50 mm) .0197 (HQCD) (0,80 mm) .0315 (EQCD) EQCD04004.00TTLSTR2 Q STRIP COAX CABLE ASSEMBLIES 0,50 mm or HQCD Mates with: 0,80 mm pitch SPECIFICATIONS QTH, QSH For complete speci cations see EQCD Mates with: www.samtec.com HQCD or QTE, QSE www.samtec.com EQCD Cable: 38 AWG micro ribbon coax cable Signal Routing: 50 Single-Ended Overall Length: (95,3 mm) 03.75 to (1 m) 40 standard 38 AWG Cable Flexing Life: micro ribbon >10,000 cycles coax cable Screw & panel Cable Bending Radius: <2,5mm mount options Plating: Socket or Au over 50 (1,27 m) Ni Retention pins Terminal Current Rating: EQCD: 500 mA per pin HQCD: 300 mA per pin (6 adjacent pins powered) Rated 7dB Insertion Loss Cable Cable Propagation Delay: Length EQCD HQCD Surface Mount 4.79 nsec/meter Operating Temp Range: 10 (0,25 m) 5.50 GHz / 11.00 Gbps 6.50 GHz / 13.00 Gbps or Panel Mount -25C to +105C Performance and complete test data available at Unmating Force (-RT1 option): www.samtec.com EQCD, www.samtec.com HQCD -RT1 option increases or contact sig samtec.com unmating force up to 50% RoHS Compliant: Yes NO. OF POSITIONS TYPE WIRE LENGTH RECOGNITIONS PER ROW For complete scope of recognitions see www.samtec.com/quality 030, 060, 090 XX.XX (HQCD Series) = Wire Length in Inches HQCD FILE NO: 090871 0 000 (43,7 mm) 01.72 minimum = (0,50 mm) .0197 pitch 020, 040, 060 APPLICATIONS (EQCD Series) EQCD = (0,80 mm) .0315 pitch (9,28) .365 OAL = Wire Length + (24,13) .950 Processing conditions will affect mated height. Wire Length (1,27) .050 ALSO AVAILABLE (MOV Required) Other sizes and lengths Other terminations Other wire AWG Retention pin Contact Samtec. Note: Cable lengths longer END NO. 1 END NO. 2 than 40.00 (1 meter) are not (STL SHOWN) (STR SHOWN) supported with S.I. test data. Note: Design your High Speed Cable with Samtecs High Speed Cable Solutionator at www.samtec.com/hdr Note: This Series is non-standard, non-returnable. WWW.SAMTEC.COM Due to technical progress, all designs, speci cations and components are subject to change without notice.EQCD02040.00TPUTTR1 HQCD03006.00STLTTR1B HQCD, EQCD SERIESHQCD, EQCD SERIES SCREW MOUNT APPLICATIONS (F, S, B) Screw Down 4-40 Panel Mount options Thread options SO0318040102 END END WIRING OPTION END OPTIONS NO. 1 NO. 2 Leave blank for no Screw Mount Specify 1 & Retention End Option END ASSEMBLIES = Pin 1 to Pin 1 from chart F 2 = Screw Mount End No. 1 only = Pin 1 to Pin 2 (N/A with XPX options) 3 S = Pin 1 to Second to Last Pin PANEL MOUNT = Screw Mount End No. 2 only END OPTION 4 B APPLICATIONS = Pin 1 to Last Pin = Screw Mount Both Ends (TPU, TPD, SPU, SPD) (N/A with XPX options) END 1 1 or SURFACE MOUNT = End No. 1 Screw Mount. END 2 End No. 2 Retention Pin or Socket Terminal, Top Mount, TTR Notch Right 2 Terminal, Top Mount, = End No. 1 Retention Pin or Socket. TTL Notch Left End No. 2 Screw Mount Option Terminal, Bottom Mount, TBR Notch Right END 1 PANEL MOUNT ONLY Terminal, Bottom Mount, TBL Notch Left Terminal, Panel Mount, TPU Notch Up Socket, Top Mount, STR Notch Right Terminal, Panel Mount, TPD Socket, Top Mount, Notch Down STL Notch Left Socket, Panel Mount, Socket, Bottom Mount, SPU Notch Up SBR Notch Right Socket, Panel Mount, Socket, Bottom Mount, SPD SBL Notch Down Notch Left WWW.SAMTEC.COM Due to technical progress, all designs, speci cations and components are subject to change without notice.