F-215 IDMD24D12.00G (2,54 mm) .100 SLIM BODY FLAT RIBBON IDC CABLES Mates with: SPECIFICATIONS TYPE ROW NO. PINS END TSW, MTSW, TSM, EJH, STRIP OPTION PER ROW AS SEM BLY For complete speci cations PHT, HMTSW, HTSW, see www.samtec.com IDSS, HW, DW, EW, ZW, MTLW www.samtec.com IDSD, www.samtec.com IDMS or IDSD Mates with: Single www.samtec.com IDMD TST, HTST, ZST, S = S End Insulator Material: = Single BST, EJH Black Glass Filled Polyester Plating: Au over 50 (1,27 m) Ni or D Sn over 100 (2,54 m) Cu = Double or 50 (1,27 m) Ni (Color coded Wire: IDM cable N/A for 28 AWG 7/36 stranded = Standard Tail Male Plug Tinned Copper 31 thru 36 Temperature Range: Socket or Male Plug on one end pins/row. -20C to +105C See G IDS (Rainbow Cable) option.) = Socket Double -40C to +105C = D End (Gray Cable) Contact (IDSS/IDSD): BeCu Terminal (IDMS/IDMD): Phosphor Bronze Current Rating (IDSD/TST): 02 thru 32 3.4 A per pin (1 position powered per row) Current Rating (IDMD): DOUBLE 3 A per pin Full size (64 positions): IDMD IDMS (82,55) 3.250 (1 position powered per row) Less than 64 positions: (Double) Contact Resistance: (Single) No. Positions/row X (2,54) .100 + (1,68) .066 15 m Socket or Male Plug on each end SINGLE Lead Size Range: Full size (32 positions): (0,56 mm) .022 SQ to (81,53) 3.210 Less than 32 positions: (0,71 mm) .028 SQ (2,54) (5,08) Transfer = No. Positions/row X (2,54) .100 + (0,71) .028 .100 .200 T Lead Insertion Depth: End (5,59 mm) .220 to (6,22 mm) .245 (6,10) .240 Insertion Force: MAX (Single contact only) 4 oz (1,11 N) avg. (0,48) ((0,64 mm) .025 SQ probe) (3,18) .019 .125 Withdrawal Force: (Single contact only) (0,46) (2,54) Male Plug on one end with socket on (2,54) .100 3 oz (0,83 N) avg018 .100 other. Begin part number with IDM. x ((0,64 mm) .025 SQ probe) (0,48) RoHS Compliant: .019 (For square or long tail see HCMX Series) Yes OTHER SOLUTIONS RECOGNITIONS 02 thru 36 For complete scope Molded-To-Position of recognitions see www.samtec.com/quality IDC Assemblies Low pro le DOUBLE Full size (72 positions): Skinny side locks (92,71) 3.650 Less than 72 positions: Dual beam contacts IDSD IDSS No. Positions/row x (2,54) .100 + (1,50) .059 Single and double row (Double) (Single) SINGLE (3,05 mm) .120 Full size (36 positions): (91,69) 3.610 and (5,84 mm) .230 Less than 36 positions: (5,08) No. Positions/row x (2,54) .100 + (0,48) .019 .200 length tail available Call (9,27) Samtec .365 REF for HCXX Series. (0,76) (2,54) (2,54) .030 .100 .100 SQ Note: This Series is non-standard, non-returnable. WWW.SAMTEC.COM Due to technical progress, all designs, speci cations and components are subject to change without notice.IDSD05D04.25S02 IDSD24S05.00 IDSS, IDSD, IDMS, IDMD SERIES EJECTOR HEADERS ASSEMBLED OPTION & LOCKING CLIPS LENGTH IDSS or IDSD STRIP ASSEMBLY Ejector headers Locking clips XX.XX POLARIZING KEY LOCKING = Assembled Length CLIP .025 SQ (0,64) .025 Optional polarizing key for TERMINAL SQ PC use with IDSS & IDSD STRIP (TSW) Assembled Length in BOARD 1 (5,84) INCHES ( /8 ) Series. Also polarizes .230 (2 inches minimum) SSW, SSQ, ESW & ESQ Series. Black High See TSW Series. Temperature Thermo plas tic Order: Part Number PK-01-06 See EJH Series. (Available in wheels of six each) Tin Plating = T (Both ends) ST X S XX RR = Stripped & Tinned = Daisy Chain Single = Re= Reverversedsed Tin IDM Specify Suf x from table. 2 10 (0,25 m) Gold IDS 1 C = XX 8 min. All dimensions are 1/16 . Single Row (-T End Assembly Required) Not available in 28 positions and higher. Connectors (IDSS) 10 (0,25 m) Gold IDM A = Tin IDS (-T End Assembly Required) Outer Most Standard plating is selective 4 minimum gold over BeCu contact for IDS When mating double row Selective gold over phosphor 8 connector with two single row bronze for IDM. 1 1/8 (3,18) ST8 connectors, the outer most 1/4 (6,35) ST4 single will be connected to M 1/2 (12,70) = Middle Reversed P XX ST2 Conductor 1 and the inside =Polarized 3/8 (9,53) ST3 single to Conductor 2. 4 7 72 04 02 D XX B XX = Daisy Chain, Double = Breakout 71 03 01 Specify XX as number of 2 1 XX 8 conductors to be broken out. Specify XX as position. For min. Requires SXX, WXX or DXX Double Row Double the same position will Connectors (IDSD or be polarized on both ends. 8 IDMD) (Not available on IDM unless transfer, then only the socket O Outer Most is polarized.) 2 XX = Outside Reversed 4 minimum G 5 max. 7 = Gray Cable 2 min. Specify G for Gray cable. Gray Breakout starts with Number 1 W XX lead indicated by brown wire or cable has one red edge. IDSS = Wiring Reversed red stripe. Shown on top side. 5 and IDMS uses .100 centerline Daisy Chain, Single cable. IDSD and IDMD uses .050 centerline cable. Cable is RW Same as S XX except outer = Reversed Wiring 28 AWG 7/36 copper wire. strip connected to Conductor Standard cable is same as 2 and inside strip connected Requires SXX, WXX or DXX above except color coded. 1 wire opposite position 1. to Conductor 1. 3 7 6 8 WWW.SAMTEC.COM Due to technical progress, all designs, speci cations and components are subject to change without notice.