MEC1-1XX-XX-XX-D-RAX-XX-SL-XX REVISION AG PATENT NUMBER 6159045 No OF POSITIONS OPTION -05, -08, -20, -30, -40, -50 (SEE FIG 1) -TR: TAPE & REEL -60 & -70 (SEE FIG 2, SHT 3) DO NOT (SUBSTITUTE -T: FOR -TR: REF (PER ROW) SCALE FROM DESIGNATION WHEN USING -XM THIS PRINT PLATING DESIGNATION WITH C CARD THICKNESS BOTH -NP AND -SL OPTIONS) *-01: .031 THICK CARD .0050 0.127 (-T OR -TR OPTION NOT AVAILABLE (USE MEC1-XX-T-D-RAX-X-SL) FOR 70 POS) (SEE NOTE 9) .1091 2.770 REF -02: .062 THICK CARD (USE MEC1-XX-S-D-RAX-X-SL) SOLDER LOCKS (SEE NOTE 9) .0050 0.127 PLATING NON-POLARIZED OPTION C -F: 3 FLASH GOLD IN CONTACT AREA, -NP: NO POLARIZED POSITION MATTE TIN ON TAIL (ONLY AVAILABLE ON -05, .0394 1.000 -L: 10 LIGHT GOLD IN CONTACT AREA, -08, -20, & -30 POSITIONS) (TOL NON ACCUM) MATTE TIN ON TAIL (SEE FIG 4, SHT 3) 02 -S: 30 SELECTIVE GOLD IN CONTACT AREA, -BLANK: BODY IS POLARIZED MATTE TIN ON TAIL -FM: 3 FLASH GOLD IN CONATACT AREA, MATTE ON TIN TAIL .268 6.81 TAIL OPTION REF -LM: 10 LIGHT IN CONTACT AREA, REF -RA1: STANDARD MATTE TIN ON TAIL -RA2: ELEVATED (SEE FIG 3, SHT 3) -SM: 30 SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL 01 ROW SPECIFICATION .050 1.27 REF * = FOR EXISTING CUSTOMERS ONLY .026 0.66 REF -D: DOUBLE (USE MEC1-XX-X-D-RAX-X-SL) REF .070 1.78 REF REF * = FOR EXISTING CUSTOMERS ONLY REF MEC1-XX-X-D-RA1-X-SL .125 3.18 REF .350 8.89 .460 11.68 REF REF NOTES: C 1. REPRESENTS A CRITICAL DIMENSION. C .059 1.50 2. MAXIMUM BURR ALLOWANCE: .004 0.10 . 3. MINIMUM PUSHOUT FORCE: .5 LB0394.0020 1.0000.051 4. TAIL OPTION -RA1 TO HAVE C-150-01-XX-X CONTACT FULLY PRE-FORMED. (TOL NON ACCUM) 5. BODIES TO BE LAYER PACKAGED FOR TRANSIT BETWEEN INVENTORY AND PRODUCTION. 6. TO BE MEASURED AT 2 MAIN 90 BENDS. C C 7. MEASURE FIRST AND LAST PIN OF EACH ROW0050 0.127 8. FOR QUANTITIES UP TO 49 PIECES, NO LEADER, TRAILER, OR REEL WILL BE SUPPLIED. FOR QUANTITIES OF 50-124 PIECES, NO LEADER OR TRAILER WILL BE SUPPLIED. 9. MATING EDGE CARD THICKNESS TOLERANCE TO BE 10% OF NOMINAL FOR -01 7.5% FOR -02. UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO FIG 1 TOLERANCES ARE: SAMTEC, INC. AND SHALL NOT BE REPRODUCED MEC1-120-02-XX-D-RA1-SL SHOWN DECIMALS ANGLES OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY .XX: .01 0.3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 = SEE TABLE 3, SHT 2 PURPOSE OTHER THAN THAT WHICH IT WAS .XXX: .005 0.13 PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN .XXXX: .0020 0.051 CONSENT OF SAMTEC, INC. e-Mail: info SAMTEC.com code: 55322 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 2:1 DESCRIPTION: FLAMMABILITY RATING: UL 94V-0 1mm MEC1 -RA ASSEMBLY INSULATOR: LCP DWG. NO. -01: COLOR: NATURAL -02: COLOR: BLACK MEC1-1XX-XX-XX-D-RAX-XX-SL-XX CONTACT: PHOS BRONZE BY: MARKS 01/25/00 SHEET OF1 5 F: DWG MISC MKTG MEC1-1XX-XX-XX-D-RAX-XX-SL-XX-MKT.SLDDRWREVISION AG .442 11.23 C-150-XX-X-P .320 8.13 REF (SEE TABLE 4) .169 4.30 REF (SEE TABLE 1, SHT 1) * = FOR EXISTING CUSTOMERS ONLY +.007 0.18 C -.005 0.13 (SEE TABLE 1, SHT 1) B C C .002.003 0.040.08 .134 3.40 REF C DETAIL B BOTTOM ROW TAIL SEE TABLE 2, SHT 1 (BOTTOM ROW, TOP ROW & FRONT EDGE OF BODY) C C-150-XX-X-P .036 0.93 (TYP) (SEE TABLE 4) .396 10.06 C C .471 11.97 SECTION C .002 0.05 MIN .002.003 0.050.08 C DETAIL C TOP ROW TAIL PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN e-Mail: info SAMTEC.com code: 55322 CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING 1mm MEC1 -RA ASSEMBLY DWG. NO. SHEET SCALE: 2:1 MEC1-1XX-XX-XX-D-RAX-XX-SL-XX BY: MARKS 01/25/00 SHEET OF2 5 F: DWG MISC MKTG MEC1-1XX-XX-XX-D-RAX-XX-SL-XX-MKT.SLDDRW