F-219 (Rev 29JAN20) MEC112002FDA MEC113002FDA MEC114002LD (1.00 mm) .0394 MEC1 SERIES MINI EDGE CARD SOCKET Mates with Mates with: (1.60 mm) SPECIFICATIONS (1.60 mm) .062 card .062 card For complete specifications and recommended PCB layouts see APPLICATION www.samtec.com MEC1 Insulator Material: Black LCP Contact Material: BeCu Plating: Sn or Au over 50 (1.27 m) Ni Operating Temp Range: -55 C to +125 C Current Rating: 2.2 A per pin (2 adjacent pins powered) Voltage Rating: 250 VAC Insertion Depth: (5.84 mm) .230 to HIGH-SPEED CHANNEL PERFORMANCE Optional (8.13 mm) .320 Alignment pin RoHS Compliant: MEC1 Yes Rating based on Samtec reference channel. For full SI performance data visit Samtec.com 14 PROCESSING or contact SIG samtec.com Gbps LeadFree Solderable: Yes SMT Lead Coplanarity: PLATING OTHER POSITIONS (0.10 mm) .004 max (05-20) 1 MEC1 02 D NP OPTION OPTION PER ROW (0.15 mm) .006 max (30-70)* *(.004 stencil solution may be available contact IPG samtec.com) A RECOGNITIONS = Alignment F NP Pin metal or For complete scope of 05, 08, 20, 30, 40, 50, 60, 70 = Gold flash on contact, = No recognitions see plastic at www.samtec.com/quality Matte tin on tail Polarization Samtec (05, 08, 20 & discretion. 30 positions L FILE NO. E111594 only) = 10 (0.25 m) K Gold on contact, = (7.87 mm) Leave Matte Tin on tail .310 DIA Blank for ALSO AVAILABLE Polyimide film polarization (MOQ Required) Pick & Place Pad Locking Clip (Manual placement required) POLARIZED POSITIONS (No. of Positions + 2) x POSITIONS TR Other platings PER ROW (1.00) .03937 + (2.54) .100 (No Contact) = Tape & Reel 02 140 3, 4 05 (05-60 only) (6.99) 08 5, 6 .275 20 15, 16 30 21, 22 01 139 (1.83) (0.36) .072 Important Note: 40 31, 32 (1.00) .014 Samtec recommends that .03937 41, 42 50 pads on the mating board be (No. of Positions + 2) 60 31, 32, 63 & 64 Gold plated. x (1.00) .03937 70 53, 54, 115 & 116 Notes: (8.89) (9.04) (0.15) (1.40) While optimized for .350 .356 .006 .055 50 W applications, this connector with alternative (0.89) signal/ground patterns may .035 (8.51) also perform well in certain DIA .335 75 W applications. A Some sizes, styles and OPTION options are non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Standard Card Edge Connectors category: Click to view products by Samtec manufacturer: Other Similar products are found below : 6565204-6 PKC-156 1437274-4 147889-1 1489165-4 EBT156-12B1X EBT15622B2X EBT156-22R2W 1-582587-1 1-582589-1 2- 6437275-9 284-0102-12100 306022901000000 307-012-502-202 307-024-526-201 307-056-520-300 307-080-526-208 1926088-2 245-062- 520-350 287-0032-12101 306-010-500-112 306-028-525-102 306-240-318 307-036-502-202 307-036-521-301 307-072-526-202 345-060- 559-303 368-004-520-201 392-008-559-201 534671-1 5-530501-5 341-240-317 345-029-520-300 345-030-500-301 345-044-500-300 345- 220-058 346-240-318 387-012-523-300 395-044-520-300 395-100-524-300 50-12B-10 50-6SN-5 09-07-2032 10035388-106LF 10035388- 802LF 10115859-011LF 10122859-009LF 101269333204245CLF 10127905-B04B24BLF 530555-1