F-219
PMSS0518K03.50DLUS
PMSDT0224K03.50DLUS
(4.19 mm) .165" PMSD, PMSDT, PMSS, PMSST SERIES
PDOISWCRERET ME WATIERE C JAUBMLE APERS CSEAMBBLELY
Mates with:
Wire range
SPECIFICATIONS
IPBT
from 16-24
For complete specifications Plastic latch
AWG
see www.samtec.com?PMSD,
www.samtec.com?PMSDT,
www.samtec.com?PMSS or
www.samtec.com?PMSST
Insulator Material: PMSD/IPBT
Valox 457
WIRE CURRENT RATING
Contact Material:
GAUGE (PER PIN)
Phosphor Bronze
16 AWG 10.3 A
Plating:
Sn over 50 18 AWG 8.8 A
(1.27 m) Ni
22 AWG 5.7 A
Operating Temp Range:
24 AWG 5.2 A
-10 C to +105 C (PVC)
-40 C to +105 C (*Teflon ) 2 PINS POWERED Single or
Voltage Rating:
Double end
22 & 24 AWG =
Keyed option
300 VAC/424 VDC (PVC)
polarization
16,18 & 20 AWG =
424 VAC/600 VDC (PVC)
Individually
24 AWG =
shrouded contacts
300 VAC/424 VDC (*Teflon )
Plastic latches
Wire:
16 to 24 AWG
RoHS Compliant:
Yes
*DuPont Teflon is a
registered trademark of the WIRE ASSEMBLED END LATCH
PINS
TYPE
E.I. du Pont de Nemours
K
GAUGE LENGTH OPTION OPTION
PER ROW
and Company or its affiliates.
RECOGNITIONS
02, 16
For complete scope K XX.XX
of recognitions see
= Keyed = Wire
S
03, 04,
www.samtec.com/quality
18
PMSD Polarization Length
= Single End
05,08,
= Double Row in Inches
206
PVC Cable (88.90 mm)
10, 15* D
(20 AWG/
FILE NO. E111594 03.50" min.
(Standard sizes) = Double End
600 volts)
PMSDT
*Only (Latch required)
COMPONENTS
= Double Row
available for
22
*Teflon Cable
double row
For body, see
(4.19)
(24 AWG only)
www.samtec.com?IPBD 24 .165
For contacts, see
PMSS
www.samtec.com?CC69L
= Single Row
LUS
www.samtec.com?CC69R
PVC Cable
= Plastic Latch up,
straight
No. of Positions
PMSST
x (4.19) .165
ALSO AVAILABLE = Single Row
+ (1.02) .040
LDS
*Teflon Cable
(MOQ Required)
= Plastic Latch down,
05 02 01
(24 AWG only)
straight
(5.41) (7.95)
Color coded cables
.213 .313
(*Teflon N/A)
LUX*
Other sizes/pin counts
Assembled
PMSS/PMSST = Plastic Latch up,
Length
20 AWG/300 Volts
(3.18)
crossed
.125
No. of Positions
LDX*
x (4.19) .165
= Plastic Latch down,
+ (1.02) .040
Notes:
crossed
(4.19)
For wiring option information 05 02 01
.165
refer to drawing on web.
*(PMSD/PMSDT only)
(12.14)
Teflon cable is intended for
.478
crimp only. Contact Samtec for
solderable cable applications.
10 06
Some lengths, styles and PMSD/PMSDT
options are non-standard,
DLUS
non-returnable.
Due to technical progress, all designs, specifications and components are subject to change without notice.
WWW.SAMTEC.COM
All parts within this catalog are built to Samtecs specifications.
Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.X-ON Electronics
Largest Supplier of Electrical and Electronic Components
Click to view similar products for DC Power Cords category:
Click to view products by Samtec manufacturer:
Other Similar products are found below :
H-IN-1 H-IN-12 1300000052 H-OU-32 H-OU-34 H-OU-7 H-OU-8 H-OU-9 H-PA-7 H-RC-2 H-SN-16 H-SN-21 172-4000 172-4101
172-7443-E 2J-1865A H-IN-13 H-IN-14 H-IN-4 H-IN-8 426055400-3 MN47A4BC01M010 H-OU-11 H-OU-12 H-OU-13 H-OU-14 H-
OU-19 H-OU-2 H-OU-23 H-OU-24 H-OU-31 H-PA-5 H-PA-8 H-RC-1 H-SN-14 H-SN-22 32102-021500-200-RS 420680840-3
426451500-3 H-SN-18 H-OU-21 H-OU-10 1-832692-4 FJ-VSP 3M 1300000086 1300140079 96CB-POWER-B-1.8M2 520-092-R
426040200 H-OU-28