NOTES: REVISION DC SFM-1XX-XX-XXX-D-XXX C 1. REPRESENTS A CRITICAL DIMENSION. 2. MINIMUM PUSHOUT FORCE: .5 LB. No OF POSITIONS OPTIONS 3. COPLANARITY: .004 0.10 = POS 05 THRU 26 .006 0.15 = POS 27 THRU 50 ALL POSITIONS AVAILABLE (LEAVE BLANK FOR STANDARD DO NOT 4. TUBE ALL POSITIONS. PARTS TO BE TUBED WITH -02 THRU -50 AND USE SFM-XX-D) SCALE FROM NOTCH GOING WITH ARROW. THIS PRINT (USE BODY: SFM-XX-D-XX-X) -N: NO POLARIZATION NOTCH 5. PINS CAN BE ORIENTED IN ANY DIRECTION (USE SFM-XX-D-XX-N) BOTH ROWS MUST FACE SAME WAY. -A: ALIGNMENT PIN (USE SFM-XX-D-A-X) 6. SEE NOTCH FOR PROPER ORIENTATION. LEAD STYLE (SEE FIG 4, SHT 2) 7. MAXIMUM PIN HEIGHT VARIATION: .003 0.08 . -LC: LOCKING CLIP (SEE FIG 6, SHT 3 & NOTE 8) -01: THROUGH HOLE 8. DUE TO HIGH AMOUNT OF INSERTION FORCE (AVAILABLE ON ALL LEADS) NEEDED, THE -LC OPTION IS NOT COMPATIBLE WITH (USE CONTACT: C-44-01-XXX) -P: PICK AND PLACE PAD AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL (SEE FIG 1, SHT 1) PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION. (SEE FIG 5, SHT 2) -02: SURFACE MOUNT -TR: TAPE & REEL (SEE SHT 4) (USE CONTACT: C-44-02-XXX) (NOT AVAILABLE WITH -DS OPTION) (SEE FIG 2, SHT 2) -K: POLYIMIDE FILM PAD (.005 0.13 THICKNESS) -03: STRAIGHT MODIFIED (SEE FIG 3, SHT 2) (USE K-DOT-.157-.250-.005) (USE CONTACT: C-44-03-XXX) -SN: SOLDER NAIL FOR .062 BOARD *: DIMENSIONS N/A FOR -N OPTION (SEE FIG 1, SHT 1) (SFM-XX-D-SN AND WT-27-01-T) -L1: THROUGH HOLE (LOW INSERTION) (AVAILABLE WITH LEAD STYLE -02, -L2 & -T2) (USE CONTACT: C-61-01-XXX) (NOT AVAILABLE WITH -A & -LC) *.145 3.68 REF (SEE FIG 1, SHT 1) -SN2: SOLDER NAIL FOR .093 BOARD -L2: SURFACE MOUNT (LOW INSERTION) (SFM-XX-D-SN AND WT-27-02-T) (USE CONTACT: C-61-02-XXX) *.020 0.51 REF (AVAILABLE WITH LEAD STYLE -02, -L2 & -T2) (SEE FIG 2, SHT 2) (NOT AVAILABLE WITH -A & -LC) .120 3.05 REF -L3: STRAIGHT MODIFIED (LOW INSERTION) *.080 2.03 REF -DS: DUAL SCREW DOWN FOR .062 BOARD (USE CONTACT: C-61-03-XXX) (SEE FIG 8, SHT 3) .050 1.27 REF (SEE FIG 1, SHT 1) 02 (ONLY AVAILABLE WITH -01, -02 AND -03 LEAD -T1: THROUGH HOLE (PHOS BRONZE) STYLE, 02 THRU 40 POSITIONS) (USE CONTACT: C-119-01-XXX) C (NOT AVAILABLE WITH OPTIONS -N, -A, -LC, -P, (SEE FIG 1, SHT 1) L -TR, -K, -SN AND SN2), (USES SFM-XX-D-DS, -T2: SURFACE MOUNT (PHOS BRONZE) CPS-RR-XX-XX-X, ACCRT-01 AND WT-27-XX-T (USE CONTACT: C-119-02-XXX) 01 ALWAYS FILLED) (SEE FIG 2, SHT 2) C L .050 1.27 REF BODY SPECIFICATION -D: DOUBLE ROW (NO. OF POS x .050 1.27 ) + .015 0.38 REF PLATING SPECIFICATION -S: 30 SELECTIVE GOLD IN CONTACT AREA, C SFM-XX-D-LC-X L (NO. OF POS x .050 1.27 ) + .155 3.94 REF MATTE TIN ON TAIL -F: 3 FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL C-XX-01-XXX -H: 30 HEAVY GOLD IN CONTACT AREA, (SEE NOTE 5) 3 GOLD ON TAIL -L: 10 LIGHT SELECTIVE GOLD IN CONTACT AREA, .180 4.57 REF MATTE TIN ON TAIL .015 0.38 REF .110 2.79 REF -STL: 30 SELECTIVE GOLD IN CONTACT AREA, TIN/LEAD (90/10+/-5%) TAIL (ONLY AVAILABLE ON -02 OR -L2 LEADSTYLES) -SM: 30 SELECTIVE GOLD IN CONTACT AREA, C L (SEE TABLE 1) MATTE TIN ON TAIL -FM: 3 FLASH SELECTIVE GOLD IN CONTACT AREA, 2 MAX SWAY (TYP) MATTE TIN ON TAIL -LM: 10 LIGHT SELECTIVE GOLD IN CONTACT AREA, REF .050 1.27 MATTE TIN ON TAIL .005 0.13 REF (NO. OF POS x .050 1.27 ) - .050 1.27 REF 1 MAX SWAY (TYP) SECTION FIG 1 UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE THROUGH HOLE/STRAIGHT MODIFIED DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO TOLERANCES ARE: SAMTEC, INC. AND SHALL NOT BE REPRODUCED DECIMALS ANGLES OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY .XX: .01 .3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS .XXX: .005 .13 PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN .XXXX: .0020 .051 CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 3:1 DESCRIPTION: .050 x .050 SOCKET STRIP DOUBLE ROW ASSEMBLY INSULATOR: LCP, COLOR: BLACK CONTACT: TIGER EYE = BeCu DWG. NO. TIGER EYE LITE = PHOSPHOR BRONZE SFM-1XX-XX-XXX-D-XXX BY: JORDAN 12/11/89 SHEET OF1 4 F: DWG MISC MKTG SFM-1XX-XX-XXX-D-XXX-MKT.SLDDR REVISION DC (SEE NOTE) .019.010 0.480.254 (SEE NOTE) (NO. OF POS x .050 1.27 ) - .050 1.27 REF (TOL ACCUM .005 0.13 OVER 50 POS) C-XX-02-XXX 02 +.005 +0.13 .190 4.83 -.002 -0.05 .1575.0050 4.0000.127 .190 4.83 01 IN-PROCESS 2 MAX SWAY (TYP) -X2 FIG 3 -K: POLYIMIDE FILM PAD (SAME AS FIG 1, DIFFERENT AS SHOWN) FOR HAND FILL ONLY NOTE: DIMENSION APPLIES PRIOR NOTE: = USED MEASURED DIMENSION REF TO RE-PRESS, SEE SECTIONB- = - .1575 4.000 )/2 .020 0.51 FOR FINISHED DIMENSION SFM-XX-D-LC-X +.002 +0.051 .185 4.70 -.005 -0.127 4 (SEE NOTE 7) SEE NOTE 3 SEE NOTE .165 4.19 REF 2 FIG 2 SECTION -X2: SURFACE MOUNT (SAME AS FIG 1, DIFFERENT AS SHOWN) .394 10.01 PPP-02 REF .225 5.72.010 0.25 (SEE TABLE 2) REF (NO. OF POS x .050 1.27 ) + .125 3.18 REF .062 1.57 SFM-XX-D-A-X .050 1.27 FIG 5 REF -P: PICK AND PLACE PAD (PAD TO BE ORIENTED A SHOWN FOR 5-12 POSITION PARTS) (FOR 13-50 POSITION PARTS, PAD MAY BE ORIENTED IN EITHER DIRECTION) .050 1.27 (SAME AS FIG 1, DIFFERENT AS SHOWN) R REF REF PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION (NO. OF POS x .050 1.27 ) + .075 1.91 REF CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN e-Mail info SAMTEC.com code 55322 CONSENT OF SAMTEC, INC. FIG 4 DESCRIPTION: -A: ALIGNMENT PIN DO NOT SCALE DRAWING .050 x .050 SOCKET STRIP DOUBLE ROW ASSEMBLY (SAME AS FIG 1, DIFFERENT AS SHOWN) DWG. NO. SHEET SCALE: 3:1 SFM-1XX-XX-XXX-D-XXX F: DWG MISC MKTG SFM-1XX-XX-XXX-D-XXX-MKT.SLDDRW BY: JORDAN 12/11/89 SHEET OF2 4