NOTES: REVISION CP SFM-1XX-XX-XXX-D-XXX C 1. REPRESENTS A CRITICAL DIMENSION. C1 2. MINIMUM PUSHOUT FORCE: .5 LB. 3. COPLANARITY: .004 0.10 = POS 05 THRU 26 No OF POSITIONS OPTIONS .006 0.15 = POS 27 THRU 50 ALL POSITIONS AVAILABLE (LEAVE BLANK FOR STANDARD 4. TUBE ALL POSITIONS. PARTS TO BE TUBED WITH -02 THRU -50 AND USE SFM-XX-D) NOTCH GOING WITH ARROW. (USE BODY: SFM-XX-D-XX-X) -N: NO POLARIZATION NOTCH 5. PINS CAN BE ORIENTED IN ANY DIRECTION (USE SFM-XX-D-XX-N) DO NOT BOTH ROWS MUST FACE SAME WAY. -A: ALIGNMENT PIN (USE SFM-XX-D-A-X) SCALE FROM 6. SEE NOTCH FOR PROPER ORIENTATION. (SEE FIG. 4, SHT 2) LEAD STYLE THIS PRINT 7. MAXIMUM PIN HEIGHT VARIATION: .003 0.08 . -LC: LOCKING CLIP (SEE FIG. 6, SHT. 3 & NOTE 8) 8. DUE TO HIGH AMOUNT OF INSERTION FORCE -01: THROUGH HOLE (AVAILABLE ON ALL LEADS) NEEDED, THE -LC OPTION IS NOT COMPATIBLE WITH (USE CONTACT: C-44-01-XXX) -P: PICK AND PLACE PAD AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL (SEE FIG. 1, SHT. 1) (SEE FIG. 5, SHT 2) PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION. -02: SURFACE MOUNT -TR: TAPE & REEL (SEE SHT 4) (USE CONTACT: C-44-02-XXX) (NOT AVAILABLE WITH -SD OPTION) (SEE FIG. 2, SHT. 2) -K: POLYIMIDE FILM PAD (.005 0.13 -03: STRAIGHT MODIFIED THICKNESS WITH SILICONE ADHESIVE) (USE CONTACT: C-44-03-XXX) (SEE FIG. 3, SHT. 2) (USE K-500-300) (SEE FIG. 1, SHT. 1) *: DIMENSIONS N/A FOR -N OPTION -SN: SOLDER NAIL FOR .062 BOARD -L1: THROUGH HOLE (LOW INSERTION) (SFM-XX-D-SN AND WT-27-01-T) (USE CONTACT: C-61-01-XXX) (AVAILABLE WITH LEAD STYLE -02, -L2 & -T2) (SEE FIG. 1, SHT. 1) (NOT AVAILABLE WITH -A & -LC) *.145 3.68 REF -L2: SURFACE MOUNT (LOW INSERTION) -SN2: SOLDER NAIL FOR .093 BOARD (USE CONTACT: C-61-02-XXX) (SFM-XX-D-SN AND WT-27-02-T) *.020 0.51 REF (SEE FIG. 2, SHT. 2) (AVAILABLE WITH LEAD STYLE -02, -L2 & -T2) -L3: STRAIGHT MODIFIED (LOW INSERTION) (NOT AVAILABLE WITH -A & -LC) .120 3.05 REF (USE CONTACT: C-61-03-XXX) *.080 2.03 REF **-SD: SCREW DOWN FOR .062 BOARD (SEE FIG. 1, SHT. 1) (ONLY AVAILABLE WITH -01 & -02 LEAD STYLE) .050 1.27 REF -T1: THROUGH HOLE (PHOS BRONZE) 02 (NOT AVAILABLE WITH OPTIONS -N, -A, -LC, (USE CONTACT: C-119-01-XXX) -RA, -SA, -WT, -RE1, -RE2, SN, OR SN2 (SEE FIG. 1, SHT. 1) (SFM-XX-D-SD, CPS-RR-XX-XX-X & ACCRT-01) C -T2: SURFACE MOUNT (PHOS BRONZE) L (SEE FIG. 8, SHT. 3) (USE CONTACT: C-119-02-XXX) (SEE FIG. 2, SHT. 2) (** = NOT RELEASED FOR PRODUCTION) 01 C L .050 1.27 REF BODY SPECIFICATION -D: DOUBLE ROW CP PLATING SPECIFICATION (NO. OF POS x .050 1.27 ) + .015 0.38 REF -S: 30 SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL SFM-XX-D-XX-X (NO. OF POS x .050 1.27 ) + .155 3.94 REF -F: 3 FLASH SELECTIVE GOLD IN CONTACT AREA, C L MATTE TIN ON TAIL C-XX-01-XXX -H: 30 HEAVY GOLD IN CONTACT AREA, (SEE NOTE 5) 3 GOLD ON TAIL -L: 10 LIGHT SELECTIVE GOLD IN CONTACT AREA, .180 4.57 REF MATTE TIN ON TAIL .015 0.38 REF .110 2.79 REF -STL: 30 SELECTIVE GOLD IN CONTACT AREA, TIN/LEAD (90/10+/-5%) TAIL (ONLY AVAILABLE ON -02 OR -L2 LEADSTYLES) C2 -SM: 30 SELECTIVE GOLD IN CONTACT AREA, C L (SEE TABLE 1) MATTE TIN ON TAIL -FM: 3 FLASH SELECTIVE GOLD IN CONTACT AREA, 2 MAX SWAY (TYP) MATTE TIN ON TAIL REF -LM: 10 LIGHT SELECTIVE GOLD IN CONTACT AREA, C4 .050 1.27 MATTE TIN ON TAIL C3 .005 0.13 REF (NO. OF POS x .050 1.27 ) - .050 1.27 REF 1 MAX SWAY (TYP) SECTION FIG 1 UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE THROUGH HOLE/STRAIGHT MODIFIED DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO TOLERANCES ARE: SAMTEC, INC. AND SHALL NOT BE REPRODUCED DECIMALS ANGLES OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY .XX: .01 .3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS .XXX: .005 .13 PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN .XXXX: .0020 .051 CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 3:1 DESCRIPTION: .050 x .050 SOCKET STRIP DOUBLE ROW ASSEMBLY INSULATOR: LCP, COLOR: BLACK CONTACT: TIGER EYE = BeCu DWG. NO. TIGER EYE LITE = PHOSPHOR BRONZE SFM-1XX-XX-XXX-D-XXX CP BY: JORDAN 12/11/89 SHEET OF1 4 F: DWG MISC MKTG SFM-1XX-XX-XXX-D-XXX-MKT.SLDDR REVISION CP (SEE NOTE) (NO. OF POS x .050 1.27 ) - .050 1.27 REF C7 (TOL ACCUM .005 0.13 OVER 50 POS) .019.010 0.480.254 C-XX-02-XXX (SEE NOTE) 02 01 .190 4.83 C5 2 MAX SWAY (TYP) .1575.0050 4.0000.127 FIG 3 -K: POLYIMIDE FILM PAD (SAME AS FIG 1, DIFFERENT AS SHOWN) NOTE: = USED MEASURED DIMENSION REF SFM-XX-D-XX-X = - .1575 4.000 )/2 .020 0.51 C6 +.002 +0.051 .185 4.70 -.005 -0.127 4 (SEE NOTE 7) SEE NOTE 2 2 SEE NOTE .161 4.09 REF SECTION FIG 2 -X2: SURFACE MOUNT (SAME AS FIG 1, DIFFERENT AS SHOWN) .394 10.01 PPP-02 REF .225 5.72.010 0.25 (SEE TABLE 2) REF (NO. OF POS x .050 1.91 ) + .125 3.18 REF .062 1.57 SFM-XX-D-A-X .050 1.27 FIG 5 REF -P: PICK AND PLACE PAD (PAD TO BE ORIENTED A SHOWN FOR 5-12 POSITION PARTS) (FOR 13-50 POSITION PARTS, PAD MAY BE ORIENTED IN EITHER DIRECTION) .050 1.27 (SAME AS FIG 1, DIFFERENT AS SHOWN) R REF REF PROPRIETARY NOTE (NO. OF POS x .050 1.91 ) + .075 0.38 REF THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN e-Mail info SAMTEC.com code 55322 CONSENT OF SAMTEC, INC. FIG 4 DESCRIPTION: -A: ALIGNMENT PIN DO NOT SCALE DRAWING .050 x .050 SOCKET STRIP DOUBLE ROW ASSEMBLY (SAME AS FIG 1, DIFFERENT AS SHOWN) DWG. NO. SHEET SCALE: 3:1 SFM-1XX-XX-XXX-D-XXX F: DWG MISC MKTG SFM-1XX-XX-XXX-D-XXX-MKT.SLDDRW BY: JORDAN 12/11/89 SHEET OF2 4