DO NOT SCALE FROM THIS PRINT NOTES: REVISION DM SFM-1XX-XX-XXX-D-XXX C 1. REPRESENTS A CRITICAL DIMENSION. 2. MINIMUM PUSHOUT FORCE: .5 LB. No OF POSITIONS OPTIONS C 3. COPLANARITY: .004 0.10 = POS 05 THRU 26 (LEAVE BLANK FOR STANDARD ALL POSITIONS AVAILABLE .006 0.15 = POS 27 THRU 50 AND USE SFM-XX-D) -02 THRU -50 4. TUBE ALL POSITIONS. PARTS TO BE TUBED WITH -N: NO POLARIZATION NOTCH NOTCH GOING WITH ARROW. (USE BODY: SFM-XX-D-XX-X) (USE SFM-XX-D-XX-N) 5. PINS CAN BE ORIENTED IN ANY DIRECTION BOTH ROWS MUST FACE SAME WAY. -A: ALIGNMENT PIN (USE SFM-XX-D-A-X) 6. SEE NOTCH FOR PROPER ORIENTATION. LEAD STYLE (SEE FIG 4, SHT 2) 7. MAXIMUM PIN HEIGHT VARIATION: .003 0.08 . -LC: LOCKING CLIP (SEE FIG 6, SHT 3 & NOTE 8) C -01: THROUGH HOLE MUST BE MEASURED BETWEEN ADJACENT PINS (AVAILABLE ON ALL LEADS) (USE CONTACT: C-44-01-XXX) AND THE SAME ROW AND BETWEEN ROWS. -P: PICK AND PLACE PAD (SEE FIG 1, SHT 1) 8. DUE TO HIGH AMOUNT OF INSERTION FORCE (SEE FIG 5, SHT 2) -02: SURFACE MOUNT NEEDED, THE -LC OPTION IS NOT COMPATIBLE WITH (AVAILABLE ON 5 THRU 50 POSITION ONLY) (USE CONTACT: C-44-02-XXX) AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL -TR: TAPE & REEL (SEE SHT 4) (SEE FIG 2, SHT 2) PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION. (NOT AVAILABLE WITH -DS OPTION) -03: STRAIGHT MODIFIED 9. DIMENSION TO BE MEASURED AT BEND. -K: POLYIMIDE FILM PAD (.005 0.13 THICKNESS) (USE CONTACT: C-44-03-XXX) (SEE FIG 3, SHT 2) (USE K-DOT-.157-.250-.005) *: DIMENSIONS N/A FOR -N OPTION (SEE FIG 1, SHT 1) -SN: SOLDER NAIL FOR .062 BOARD -L1: THROUGH HOLE (LOW INSERTION) (SFM-XX-D-SN AND WT-27-01-T) (USE CONTACT: C-61-01-XXX) (AVAILABLE WITH LEAD STYLE -02, -L2 & -T2) *.145 3.68 REF (SEE FIG 1, SHT 1) (NOT AVAILABLE WITH -A & -LC) -L2: SURFACE MOUNT (LOW INSERTION) -SN2: SOLDER NAIL FOR .093 BOARD (USE CONTACT: C-61-02-XXX) *.020 0.51 REF (SFM-XX-D-SN AND WT-27-02-T) (SEE FIG 2, SHT 2) (AVAILABLE WITH LEAD STYLE -02, -L2 & -T2) .120 3.05 REF -L3: STRAIGHT MODIFIED (LOW INSERTION) *.080 2.03 REF (NOT AVAILABLE WITH -A & -LC) (USE CONTACT: C-61-03-XXX) .050 1.27 -DS: DUAL SCREW DOWN FOR .062 BOARD (SEE FIG 1, SHT 1) 02 REF (SEE FIG 8, SHT 3) -T1: THROUGH HOLE (PHOS BRONZE) (ONLY AVAILABLE WITH -01, -02 AND -03 LEAD (USE CONTACT: C-119-01-XXX) C STYLE)(NOT AVAILABLE WITH OPTIONS -N, -A, L (SEE FIG 1, SHT 1) -LC, -P, -TR, -K, -SN AND SN2), (USES SFM-XX-D-DS, -T2: SURFACE MOUNT (PHOS BRONZE) CPS-RR-XX-XX-X, ACCRT-01 AND WT-27-XX-T (USE CONTACT: C-119-02-XXX) 01 ALWAYS FILLED) (SEE FIG 2, SHT 2) C L .050 1.27 REF BODY SPECIFICATION -D: DOUBLE ROW PLATING SPECIFICATION (NO. OF POS x .050 1.27 ) + .015 0.38 REF -S: 30 SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL C SFM-XX-D-LC-X L (NO. OF POS x .050 1.27 ) + .155 3.94 REF -F: 3 FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL C-XX-01-XXX -H: 30 HEAVY GOLD IN CONTACT AREA, 3 GOLD ON TAIL (SEE NOTE 5) -L: 10 LIGHT SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL .180 4.57 REF -STL: 30 SELECTIVE GOLD IN CONTACT AREA, .015 0.38 REF .110 2.79 REF TIN/LEAD (90/10+/-5%) TAIL (ONLY AVAILABLE ON -02 OR -L2 LEADSTYLES) -SM: 30 SELECTIVE GOLD IN CONTACT AREA, C C MATTE TIN ON TAIL L (SEE TABLE 1) -FM: 3 FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL 2 MAX SWAY (TYP) -LM: 10 LIGHT SELECTIVE GOLD IN CONTACT AREA, REF MATTE TIN ON TAIL .050 1.27 C .005 0.13 REF (NO OF POS x .050 1.27 ) - .050 1.27 REF 1 MAX SECTION C SWAY (TYP) FIG 1 PROPRIETARY NOTE * * UNLESS OTHERWISE SPECIFIED, THIS DOCUMENT CONTAINS CONFIDENTIAL AND THROUGH HOLE/STRAIGHT MODIFIED DIMENSIONS ARE IN INCHES. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR .XX: .01 .3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .XXX: .005 .13 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS .XXXX: .0020 .051 WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 3:1 DESCRIPTION: .050 x .050 SOCKET STRIP DOUBLE ROW ASSEMBLY INSULATOR: LCP UL 94V-O, COLOR: BLACK CONTACT: TIGER EYE: BeCu DWG. NO. TIGER EYE LITE: PHOSPHOR BRONZE SFM-1XX-XX-XXX-D-XXX SHEET OF BY: JORDAN 12/11/89 1 4 F: DWG MISC MKTG SFM-1XX-XX-XXX-D-XXX-MKT.SLDDR REVISION DM (SEE NOTE) C .019.020 0.480.508 (SEE NOTE) (NO. OF POS x .050 1.27 ) - .050 1.27 REF (TOL ACCUM .005 0.13 OVER 50 POS) C-XX-02-XXX 02 C +.005 +0.13 .190 4.83 -.002 -0.05 (SEE NOTE 9) .190 4.83 .1575.0050 4.0000.127 01 IN-PROCESS 2 MAX SWAY (TYP) -X2 FIG 3 -K: POLYIMIDE FILM PAD C (SAME AS FIG 1, DIFFERENT AS SHOWN) FOR HAND FILL ONLY NOTE: DIMENSION APPLIES PRIOR NOTE: = USED MEASURED DIMENSION REF TO RE-PRESS, SEE SECTIONB- = - .1575 4.000 )/2 .020 0.51 FOR FINISHED DIMENSION SFM-XX-D-LC-X +.002 +0.051 .185 4.70 C -.005 -0.127 4 (SEE NOTES 7 & 9) SEE NOTE 3 SEE NOTE SEE NOTE 7 SEE NOTE 7 2 .161 4.09 REF FIG 2 -X2: SURFACE MOUNT (SAME AS FIG 1, DIFFERENT AS SHOWN) SECTION .394 10.01 PPP-02 REF .225 5.72.010 0.25 (SEE TABLE 2) REF (NO. OF POS x .050 1.27 ) + .125 3.18 REF .062 1.57 SFM-XX-D-A-X .050 1.27 FIG 5 REF -P: PICK AND PLACE PAD (PAD TO BE ORIENTED A SHOWN FOR 5-12 POSITION PARTS) (FOR 13-50 POSITION PARTS, PAD MAY BE ORIENTED IN EITHER DIRECTION) .050 1.27 (SAME AS FIG 1, DIFFERENT AS SHOWN) R REF REF PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND (NO. OF POS x .050 1.27 ) + .075 1.91 REF PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail info SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. FIG 4 DESCRIPTION: -A: ALIGNMENT PIN DO NOT SCALE DRAWING .050 x .050 SOCKET STRIP DOUBLE ROW ASSEMBLY (SAME AS FIG 1, DIFFERENT AS SHOWN) DWG. NO. SHEET SCALE: 3:1 SFM-1XX-XX-XXX-D-XXX F: DWG MISC MKTG SFM-1XX-XX-XXX-D-XXX-MKT.SLDDRW SHEET OF BY: JORDAN 12/11/89 2 4