REVISION AT SFSDX-XX-XXX-XX-XX.XX-XX-XXX (No OF POS x .050 1.27 ) FEP CABLE OPTION -NXX OPTION (END 2) + .015 0.38 REF (ONLY AVAILABLE WITH -D, -DL, -DR & -DS) -T: FEP (LEAVE BLANK FOR 01 STANDARD PVC INSULATION) -NUS: NOTCH UP, STRAIGHT C L (PIN 1 TO PIN N-1) -NDS: NOTCH DOWN, STRAIGHT DO NOT No OF POSITIONS (PIN 1 TO PIN 2) .250 6.35 SCALE FROM -02 THRU -50 -NUX: NOTCH UP, CROSSED .120 3.05 REF .145 3.68 REF THIS PRINT REF (PER ROW) (PIN 1 TO PIN N) -NDX: NOTCH DOWN, CROSSED (PIN 1 TO PIN 1) WIRE GAUGE (AWG) END OPTION -28, -30 02 (END OPTION COMBINATIONS NOT AVAILABLE) COLOR CODE: FIG 1 -S: SINGLE END .050 1.27 .080 2.03 REF -D: DOUBLE END LEAVE BLANK FOR ALL BLACK WIRE -S: SINGLE END REF (MUST CHOOSE FROM -NXX OPTIONS) C: COLOR CODED WIRE SFSD-10-28-XX-XX.XX-S SHOWN -SL: SINGLE ENDED WITH FRICTION LOCK (SEE TABLE 4, SHT 3) (SEE SHEET 2, FIG 3)(ONLY AVAILABLE ON ISDF-XX-D (NOT AVAILABLE WITH FEP OPTION) *5,*7, 10 THRU 50 POSITION) -DL: DOUBLE ENDED WITH FRICTION LOCK .050 1.27 REF PLATING SPECIFICATION (SEE SHEET 2, FIG 4) (ONLY AVAILABLE -H: 30 HEAVY GOLD IN CONTACT AREA, ON *5,*7, 10 THRU 50 POSITION) 3 GOLD ON TAIL (MUST CHOOSE FROM -NXX OPTIONS) -SR: SINGLE ENDED WITH RETENTION LATCH -G: 10 LIGHT GOLD IN CONTACT AREA, (SEE SHEET 3, FIG 5) 3 GOLD ON TAIL (ONLY AVAILABLE ON -02 THRU -50 POS) -F: 3 FLASH GOLD IN CONTACT AREA, -DR: DOUBLE ENDED WITH RETENTION LATCH C .440 11.18 3 GOLD ON TAIL (SEE SHEET 3, FIG 6) -GF: 3 FLASH SELECTIVE IN CONTACT AREA, (ONLY AVAILABLE ON -02 THRU -50 POS) REF .249 6.32 3 GOLD ON TAIL (MUST CHOOSE FROM -NXX OPTIONS) (ONLY AVAILABLE TO EXISTING -SS: DUAL SCREW DOWN, SINGLE ENDED CABLE REF CUSTOMERS SEE -F PLATING) (SEE SHT 4, FIG 7) (NOT AVAILABLE WITH OPTIONS SL, DL, SR & DR (SEE TABLE 3, SHEET 1) USES ISDF-XX-D-DS, CPS-RR-XX-XX-X & ACCRT-01) ASSEMBLED LENGTH -DS: DUAL SCREW DOWN, DOUBLE ENDED CABLE SPECIFY IN INCHES (SEE SHT 4, FIG 8) (NOT AVAILABLE WITH OPTIONS SL, DL, SR & DR (SINGLE END: 03.00 INCH 76.2mm USES ISDF-XX-D-DS, CPS-RR-XX-XX-X & ACCRT-01, MINIMUM, MUST CHOOSE FROM NXXX OPTIONS) DOUBLE END: 03.25 INCH 82.6mm C MINIMUM) ASSEMBLED LENGTH: (SEE NOTE 8) (* = NOT AVAILABLE WITH POLARIZATION KEY) DWCX-XX-XX-300 C ASSEMBLED LENGTH: XX.XX .125 3.18 POLARIZATION KEY SECTION NOTES: C 1. REPRESENTS A CRITICAL DIMENSION. 2. MINIMUM PULLOUT FORCE: 3.0 LBS 13.3 N . C 3. CONTACT MUST BE INSERTED UNTIL RETENTION FEATURE LOCKS INTO PLACE. FIG 2 C 4. ALL FINISHED GOODS ARE TO BE ELECTICAL TESTED INCLUDING HI-POT TEST -D: DOUBLE END AT 1000 VOLTS DC. AFTER FINAL ELECTRICAL TEST, LABEL EACH ASSEMBLY SFSD-10-28-XX-XX.XX-D-NUS SHOWN WITH 1 LABEL-ET STAMP ON THE BODY. (SAME AS FIG 1, UNLESS OTHERWISE STATED) 5. TINNED COPPER WIRE IS RoHS COMPLIANT. PROPRIETARY NOTE * * 6. PARTS TO BE LAYER PACKAGED. UNLESS OTHERWISE SPECIFIED, THIS DOCUMENT CONTAINS CONFIDENTIAL AND DIMENSIONS ARE IN INCHES. 7. NOTE DELETED. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: 8. FOR LENGTHS LESS THAN 12 in, TOLERANCE SHALL BE +/-.125. AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE FOR OTHER LENGTHS, TOLERANCE SHALL BE +/-2%. OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR .XX: .01 .3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 9. NOTE DELETED. REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .XXX: .005 .13 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS 10. REFER TO CRIMP SPECIFICATIONS PRINT FOR CRIMP AND STRIP .XXXX: .0020 .051 e-Mail info SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. DIMENSIONS, TOLERANCES, TOOLING AND ITS REQUIREMENTS. DO NOT SCALE DRAWING SHEET SCALE: 2:1 DESCRIPTION: MATERIAL: 11. 3LB MIN WIRE CRIMP STRENGTH FOR -30 AWG AND 4.5LB MIN .050 1.27 SOCKET DISCRETE CABLE ASSEMBLY INSULATOR: LCP UL 94V-0, COLOR: BLACK WIRE CRIMP STRENGTH FOR -28 AWG. CONTACT: BeCu DWG. NO. 12. NOTE DELETED. CABLE INSULATION: PVC OR FEP 13. -TC TEFLON USE FOR DOUBLE ENDED ASSEMBLIES ONLY, WIRE: DWC: TINNED COPPER. SFSDX-XX-XXX-XX-XX.XX-XX-XXX ALL SINGLE ENDED ASSEMBLIES USE SILVER PLATED DWCT-XX-01. SHEET OF BY: BRATCHER 5/5/2005 1 5 14. CUT LENGTH IS ASSEMBLY LENGTH MINUS OVERALL LENGTH SUBTRACTOR. F: DWG MISC MKTG SFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRWREVISION AT N-1 N N-1 N 02 01 N-1 N 01 02 01 02 NOTCH END 1 01 02 N N-1 NOTCH END 1 NOTCH END 2 (SEE TABLE 2) -NUS NOTCH END 2 (END 2 NOTCH UP, CABLE STRAIGHT) -NDX (SEE TABLE 5 FOR PIN MAPPING) (END 2 NOTCH DOWN, CABLE CROSSED) (SEE TABLE 5 FOR PIN MAPPING) 02 01 N-1 N ISDF-XX-D-L ISDF-XX-D-L 01 02 N N-1 NOTCH END 1 NOTCH END 2 (SEE TABLE 2) -NUX (END 2 NOTCH UP, CABLE CROSSED) (SEE TABLE 5 FOR PIN MAPPING) N N-1 N N-1 FIG 3 -SL: SINGLE END FRICTION LOCK SFSDX-10-28-XX-XX.XX-SL SHOWN FIG 4 01 02 01 02 (SAME AS FIG 1, UNLESS OTHERWISE STATED) -DL: DOUBLE END FRICTION LOCK SFSDX-10-28-XX-XX.XX-DL-NUS SHOWN NOTCH END 1 (SAME AS FIG 1, UNLESS OTHERWISE STATED) PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail info SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. NOTCH END 2 DESCRIPTION: -NDS DO NOT SCALE DRAWING .050 1.27 SOCKET DISCRETE CABLE ASSEMBLY (END 2 NOTCH DOWN, CABLE STRAIGHT) (SEE TABLE 5 FOR PIN MAPPING) DWG. NO. SHEET SCALE: 1:0.571429 SFSDX-XX-XXX-XX-XX.XX-XX-XXX F: DWG MISC MKTG SFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW SHEET OF BY: BRATCHER 5/5/2005 2 5