8-24 Watts xppower.com VEP Series Efficiency Efficiency Level V (24 W Level IV) CEC2008 & EISA 2007 Compliant IT & Medical Approvals Interchangeable Input Connectors Output Voltages from 5 V to 24 V Available Class II Construction White Case Version Available Specification Input General Input Voltage 8 & 15W: 80-264 VAC Efficiency See tables 24 W: 80-264 VAC, derate output power Energy Efficiency Level V 25% <90 VAC Level IV (24 W versions) Input Frequency 47-63 Hz Isolation 3000 VAC Input to Output Input Current 8 W: 0.3 A max at 90 VAC Switching Frequency 8 & 15 W: 132 kHz typical, 15 W: 0.5 A max at 90 VAC 24 W: 65 kHz typical 24 W: 0.6 A max at 90 VAC MTBF 8 - 24 W: 250 kHrs, 36 W: 200 kHrs Inrush Current 70 A max at 230 VAC, cold start at 25 C to MIL-HDBK-217F at 25C, GB Power Factor EN61000-3-2, class A No Load Input Power <0.3 W Environmental Operating Temperature 0 C to +40 C Cooling Natural convection Output Operating Humidity 5-95% RH, non-condensing Output Voltage See tables Storage Temperature -25 C to +70 C Initial Set Accuracy 5% at 50% load Shock Able to survive 1 m drop onto concrete on Minimum Load No minimum load required each of 6 axes Start Up Delay 2 s typical Vibration 10-300 Hz, 1 g 15 mins/sweep. 30 mins for Start Up Rise Time 8 & 15 W: 100 ms typical, each of 3 axes 24 W: 50 ms typical Hold Up Time 5 ms typical at full load and 115 VAC EMC & Safety Line Regulation 0.5% max Emissions EN55032, class B conducted & radiated Load Regulation 5% max Harmonic Currents EN61000-3-2, class A Transient Response 4% max. deviation, recovery to <1% Voltage Flicker EN61000-3-3 within 500 s for a 50% step load change ESD Immunity EN61000-4-2, 4 kV contact, 8 kV air, at 0.2 A/s Perf Criteria A Ripple & Noise See tables Radiated Immunity EN61000-4-3, 3 V/m, Perf Criteria A Overvoltage Protection See tables EFT/Burst EN61000-4-4, level 2, Perf Criteria A Overload Protection 120-280% Surge EN61000-4-5, installation class 3, Short Circuit Protection Trip and restart (hiccup mode) Perf Criteria A Temperature 0.2 %/C Conducted Immunity EN61000-4-6, 3 V, Perf Criteria A Coefficient Magnetic Field EN61000-4-8, 1 A/m, Perf Criteria A Dips & Interruptions EN61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms, Perf Criteria A, B, B Safety Approvals 8 & 15W: IEC60601-1, EN60601-1, UL60601-1, IEC60950-1, UL60950-1. 24W: IEC60601-1, EN60601-1, UL60601-1, IEC60950-1, EN60950-1, UL60950-1, EN62368-1, IEC62368-1 AC-DCAC-DC VEP08/15 Models and Ratings (2) (1) (6) (4) (3,5) Output Power Output Voltage Output Current Ripple & Noise Overvoltage Trip Efficiency Model Number 8.0 W 5.0 V 1.60 A 150 mV 10.0 V 73% VEP08US05 8.0 W 9.0 V 0.88 A 200 mV 18.0 V 77% VEP08US09 8.0 W 12.0 V 0.66 A 200 mV 20.0 V 77% VEP08US12 8.0 W 15.0 V 0.53 A 200 mV 25.0 V 78% VEP08US15 10.0 W 5.0 V 2.00 A 50 mV 9.0 V 75% VEP15US05 12.6 W 9.0 V 1.40 A 100 mV 15.0 V 80% VEP15US09 15.0 W 12.0 V 1.25 A 100 mV 20.0 V 82% VEP15US12 15.0 W 15.0 V 0.90 A 150 mV 25.0 V 82% VEP15US15 15.0 W 24.0 V 0.63 A 200 mV 35.0 V 83% VEP15US24 Notes 1. Measured at end of DC output lead using 20 MHz bandwidth and 0.1 F ceramic capacitor in parallel with 10 F electrolytic capacitor placed at connector terminals. 2. VEP08 models: Other voltages between 3.0 V and 18.0 V are available on request, consult sales for details. VEP15 models: Other voltages between 3.0 V and 24.0 V are available on request, consult sales for details. 3. A suffix denoting the type of mains plug required must be added to the part number. See below. 4. Efficiency given is the average of efficiencies measured with output loads of 25%, 50%, 75% and 100%. 5. For white case version add suffix -W. MOQ applies, contact sales for details. 6. VEP08 models: Typical trip point, VEP15 models: Maximum trip point. Mechanical Details VEP08: 1.06 (26.8) VEP15: 1.20 (30.5) VEP08: 2.83 (72.0) 70.87 10% VEP15: 2.95 (75.0) (1800 10%) Output Plug: 5.5 x 2.5 x 11.0 mm Inner Positive VEP08: 1.67 (42.4) VEP15: 1.81 (46.0) K UK EU China USA Australia Add suffix -UK Add suffix -EU Add suffix -CN Add suffix -US Add suffix -AU Notes 1. All dimensions in inches (mm). Tolerance is 0.04 (1) maximum, except output cable length. 2. Weight: VEP08 - 0.18 lbs (80 g) approx., VEP15 - 0.26 lbs (120 g) approx. 3. Case material is PC Class 94 V-0 4. Output Lead: UL2468 18-24 AWG 5. Mains plugs can be ordered separately. Part numbers are: VEP PLUG UK, VEP PLUG EU, VEP PLUG CN , VEP PLUG US or VEP PLUG AU