TEMS-110-02-07.0-G-D-K-TR Samtec

RUGGED TIGER EYE SYSTEMS (0.80 mm) .0315 PITCH MAX FEATURES & BENEFITS 8 2.9 Gbps Amps High-reliability, multi-finger BeCu contact Micro pitch and slim body for space-savings 6 mm, 7 mm and 10 mm stack heights Locking clip, alignment pins and weld tab ruggedizing features Rugged latching system for increased withdrawal force Vertical and right-angle mating headers Discrete wire assembly available with 32 AWG Teflon wire contact asp samtec.com for custom solutions Extended Life Product testing available Locking for increased Components Compatible with unmating force (ISDE/CC396) UMPT/UMPS (Visit samtec.com SEML and tooling for power/signal Dupont Teflon is a registered trademark of the E.I. du Pont de Nemours and Company or its affiliates. for more information) available: flexibility samtec.com/tooling KEY SPECIFICATIONS (SEM/TEM) STACK INSULATOR CONTACT OPERATING CURRENT VOLTAGE PITCH PLATING HEIGHTS MATERIAL MATERIAL TEMP RANGE RATING RATING BeCu (SEM) Au or Sn over 2.9 A per pin 0.80 mm 6 - 10 mm Black LCP -55 C to +125 C 235 VAC/330 VDC Phosphor 50 (1.27 m) Ni (2 pins powered) Bronze (TEM) F-221 samtec.com/080mm-TigerEye Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.(0.80 mm) .0315 PITCH MICRO TIGER EYE SOCKET AND HEADER STACK PLATING OTHER 1 NO. PINS PER ROW OPTIONS SERIES 02 D - - - HEIGHT - OPTION - - - OPTIONS Leave blank SEM 05, 10, 15, 20, 25 03.0 FG K for SEMS/TEMS Socket (SEM, SEMS, = 6 mm = Gold Flash = (3.50 mm) .138 TEM, TEMS only) Stack Height DIA Polyimide film A (03.0 required for Pick & Place Pad SEMS G = Alignment Pin SEM/SEMS Series) (Required for Slim Socket 30, 35, 40, 45, 50 = 10 (Not available SEMS) (SEM/TEM only) (0.25 m) with LC or WT) (Standard sizes) Gold on contact, TEM = (5.50 mm) .217 04.0 Gold Flash on tail Header DIA Polyimide film LC = 7 mm Pick & Place Pad = Locking Clip Stack Height H TEMS (Required for (Not available (TEM/TEMS only) = 30 Slim Header TEMS) with A or WT) (0.76 m) (Manual 07.0 Gold on contact, placement TR = 10 mm Gold Flash on tail required) = Tape & Reel Stack Height (Required for (TEM/TEMS only) SEMS/TEMS) WT = Weld Tab (Not available FR with A or LC) = Full Reel Tape & Reel (must order max. quantity per reel contact Samtec for quantity breaks) (No. of Positions (No. of Positions x (0.80) .0315) SEM x (0.80) .0315) + (4.50) .177 + (1.60) .063 Board Mates: TEM (3.20) .126 SEMS SEMS Board Mates: TEMS (4.50) .177 (3.75) SEM .148 View complete specifications at: samtec.com SEM & samtec.com SEMS TEM (No. of Positions Board Mates: (No. of Positions x x (0.80) .0315) SEM, SEML (0.80) .0315) + (9.00) .354 + (3.35) .132 A TEMS (5.00) (5.50) .217 Board Mates: .197 SEMS TEMS TEM MATED HEIGHTS SEM STACK HEIGHT A MATED HEIGHT* MATED 03.0 HEIGHT (5.610) .2209 6 mm 04.0 (6.610) .2602 7 mm TEM 07.0 (9.610) .3783 10 mm *Processing conditions will affect mated height. Note: Some lengths, styles and options are non-standard, View complete specifications at: samtec.com TEM & samtec.com TEMS non-returnable. F-221 samtec.com/080mm-TigerEye Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.