TFM-105-01-H-D-RA Samtec

RUGGED TIGER EYE SYSTEMS (1.27 mm) .050 PITCH MAX 8 3.2 Gbps Amps FEATURES & BENEFITS Screw down, locking clip, friction latching and weld tab ruggedizing options Shrouded, polarized and keyed Surface mount or through-hole tails High-density, four row design (FOLC/MOLC Series) Discrete wire assemblies available in single or double row, 28 and 30 AWG PVC or Teflon wire contact asp samtec.com for custom solutions Cable components (ISDF/CC03) and tooling available IDC cable Locking for assemblies with increased Dupont Teflon is a registered trademark of the E.I. du Pont de Nemours and Company or its affiliates. rugged strain relief unmating force (FFSD/FFMD, FFTP/FMTP) (SFML/TFML) KEY SPECIFICATIONS (TFM/SFM) STACK INSULATOR CONTACT OPERATING CURRENT VOLTAGE MAX PITCH PLATING HEIGHTS MATERIAL MATERIAL TEMP RANGE RATING RATING CYCLES 10,000 with 30 BeCu (SFM) (0.76 m) Au Au or Sn over 50 3.2 A per pin 1.27 mm 6 to 12 mm Black LCP -55 C to +125 C 250 VAC Phosphor Bronze (1.27 m) Ni (2 pins powered) (Call Samtec for (TFM) E.L.P. plating option) F-221 samtec.com/127mm-TigerEye Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.MAX 8 25 3.2 Gbps Amps (1.27 mm) .050 SMT/THROUGH-HOLE HEADER NO. PINS LEAD PLATING ROW SERIES OPTIONS 1 - - - - - PER ROW STYLE OPTION OPTION Specify only RA, Specify only A, SMT lead styles only Specify TFM 03, 04, L S RE1 or RE2 LC, DS or WT Specify only K or P LEAD = Standard = 15 = Single Row 06, 08 Not available with RA, STYLE (0.38 m) (TFM only) (TFM 01 & RE1 and RE2 unless RA K Gold on post, from TFML 02 only) otherwise noted. = Right-angle = Polyimide Film Matte Tin on tail = Locking chart D (Lead style Pick & Place Pad (Call Samtec (01 & 02 = Double Row 05, 07, 01 only) A for E.L.P. lead style = Alignment Pin plating option) 10, 15, 20, P only) DH* RE1 = Plastic Pick 25, 30, 35, = Double = Right-angle LC & Place Pad Horizontal 40, 45, 50 Elevated for = Locking Clip (5 positions min.) (TFM lead (Standard sizes) (1.60 mm) .062 PCB (Manual Placement (Not available with style 02 only) (Requires TFM required) 5 position with WT) (05 thru 50 lead style 01, positions only) D row and WT) Specify TR or -FR last DS (TR or FR (Not available with DS) = Dual option only RE2 Screw Down available) TFM = Right-angle for (1.60 mm) TR Elevated for .062 PCB = Tape & Reel Board Mates: (2.36 mm) .093 PCB (05, 07, 10, 15, 20, SFM, SFMC (Requires TFM lead 25, 30, 35, 40 FR Cable Mates: style 01, D row positions only) = Full Reel and WT) (TFM lead styles SFSD Tape & Reel 01 and 02 only) (must order max. (Requires D quantity per reel row option) TFML contact Samtec for MATED HEIGHTS* (Mates with quantity breaks) Board Mates: SFMDS option and LEAD STYLE (SMT) SFSD/SFSDT SS and SFML MATED HEIGHT* DS option only) TFM SFM (Not available with A, LC, WT, K, P, XR) -02 (6.35) .250 12 (8.13) .320 WT -02 = Weld Tab (1.27) .050 x -22 (9.91) .390 No. of Positions + (3.18) .125 (TFM lead styles 01 and 02 only) -32 (11.81) .465 (Required callout for RE1 & RE2) (4.45) LEAD STYLE (T/H) MATED HEIGHT* (Mates to SFSS/SFSD .175 TFM SFM SR and DR -01 (5.97) .235 option only) (05, 07, 10, 15, 20, SINGLE ROW 03 (5.97) .235 25, 30, 35, 40, 45, 50 -11 (7.75) .305 positions only) -13 -01 (7.75) .305 (1.27) .050 x No. of Positions + (3.18) .125 -21 (9.53) .375 (See website for REX, -23 (9.53) .375 DH, DS, WT OAL) -31 (11.43) .450 *Processing conditions will affect mated height. (5.72) .225 LEAD STYLE (SMT) A LEAD STYLE B C (T/H) 02 (5.72) .225 DOUBLE ROW 01 (5.59) .220 (1.97) .078 12* (7.49) .295 03* (5.59) .220 (2.77) .109 22* (9.27) .365 11* (7.37) .290 (1.97) .078 32* (11.18) .440 13* (7.37) .290 (2.77) .109 * N/A with 07, -DH or -S row option 21* (9.14) .360 (1.97) .078 B A 23* (9.14) .360 (2.77) .109 31* (11.05) .435 (1.97) .078 * Not Available with 07 or -S row option C THROUGH-HOLE SURFACE MOUNT LC A WT DS DH* RA RE1 & RE2 Note: Some lengths, styles and options are non-standard, non-returnable. View complete specifications at: samtec.com TFM & samtec.com TFML F-221 samtec.com/127mm-TigerEye Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.