TMMH-105-01-G-D Samtec

F-219 10 YEAR MFG WITH 30 GOLD EXTENDED LIFE PRODUCT TMMH12504LDVEP HIGH MATING TMMH13504FDVLC CYCLES (2.00 mm) .0787 FLEXIBLE SMT HEADER FLEX SHROUD Board Mates: SPECIFICATIONS CLT, SQT, SQW, ESQT, For complete specifications and TLE, SMM, MMS recommended PCB layouts Cable Mates: see www.samtec.com TMMH TCSD Insulator Material: Black Liquid Crystal Polymer Terminal Material: OPTIONS Phosphor Bronze Plating: ES OPTION M OPTION A OPTION Sn or Au over 50 (1.27 m) Ni Current Rating (TMMH/ESQT): 4.5 A per pin (2 pins powered) Current Rating (TMMH/SQT): OTHER SOLUTIONS 5.1 A per pin (2 pins powered) EP OPTION Operating Temp Range: Through- -55 C to +105 C with Tin -55 C to +125 C with Gold hole Voltage Rating: 281 VAC mated with SQW 250 VAC mated with SQT (4.45) RoHS Compliant: 2 mm Shunt .175 Yes Specify 2SNBKG for (1.95) (3.99) 2 mm shunt with Gold plating. .077 .157 EL OPTION EC OPTION TR OPTION PROCESSING LeadFree Solderable: NO. PINS LEAD PLATING 1 Yes TMMH PER ROW STYLE OPTION SMT Lead Coplanarity: (0.10 mm) .004 max RECOGNITIONS Specify F For complete scope of LEAD STYLE = Gold flash recognitions see on post, from chart www.samtec.com/quality 03 thru 50 Matte Tin on tail L FILE NO. E111594 LEAD MATES = 10 (0.25 m) OPTION A Z WITH Gold on post, STYLE Matte Tin on tail SQT, SQW, (2.92) ES ESQT, TLE, (3.20) .115 01 SMM, MMS, .126 (4.70) T EC TCSD .185 = Matte Tin (1.91) (6.10) CLT 04 EP & EPC .075 .240 (1.65) (4.45) EL & EBC 05 .065 .175 No. of positions x (2.00) .0787 + Z (2.00) 02 100 (1.40) .0787 .055 (6.35) .250 (1.09) .043 DIA 01 99 A ALSO AVAILABLE (10.16) .400 (MOQ Required) x No. of positions x (2.00) .0787 (4.00) (6.35) Other platings .157 .250 (2.00) .0787 A (0.64) .025 (2.51) .099 (0.51) (7.04) (1.42) (2.00) .0787 M .020 .277 .056 Note: SQ Some lengths, styles and LC (Shrouded options removed for clarity) options are non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.TMMH11804FDVEL TMMH11001FDVA TMMH11001FDV TMMH12501LDV TMMH11404LDV TMMH SERIES FLEXIBLE SMT HEADER Optional end shrouds with board lock (2.00 mm) .0787 Surface mount (2.00 mm) .0787 (2.00 mm) .0787 Optional alignment pins or locking clips FLEX SHROUD OPTIONS OTHER OPTIONS DV All Flex Shroud options require 9 pins/row minimum XXX (For board-to-board interfaces. Will not mate with TCSD) = Polarized Position. Specify position of omitted pin ES A = End Shroud = Alignment Pin (For best cost also see TSH Series) (3 positions minimum) LEAD X Y (Not available with -LC) STYLE EC (5.84) (4.45) 01 = End Shroud with Locking Clip .230 .175 LC (For best cost also see TSH Series) = Locking Clip 04 & (4.50) (3.02) (Manual placement required) .177 .119 (5 positions minimum) 05 (Not available with -A) (4.00) EP (Manual placement required) .157 = End Shroud with Guide Post M EL = Pick & Place Pad = End Shroud with Board Lock (5 positions minimum) (1.32) (Boards are positively locked and cannot be unmated) .052 TR = Tape & Reel Packaging EBC (36 positions maximum) (1.41) = End Shroud with Board Lock and Locking Clip .056 (Flex Shroud options not available (Boards are positively locked and cannot be unmated) except ES, EP & EL) EBC EPC = End Shroud with Guide Post and Locking Clip (Manual placement required) (1.17) .046 (3.20) (1.91) .126 Y .075 (1.32) DIA (1.32) X .052 .052 (2.44) X .096 EL ES EC EP EPC Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.