NOTES: REVISION DM C 1. REPRESENTS A CRITICAL DIMENSION. TSM-1XX-XX-XXX-XX-X-XXX-X 2. MAXIMUM POST HEIGHT VARIATION: .005 0.13 . 3. LOAD PARTS POS 1 IN SAME DIRECTION AS ARROW. 4. TUBE POSITIONS 03 THRU 50. No OF POSITIONS 5. TAPE & REEL AVAILABLE ON POSITION 02 THRU 28 ONLY. DO NOT OPTION 3 -02 THRU -50 LEADS MAY NOT BE VISIBLE FOR CUSTOMER S VISUAL SCALE FROM (NOT AVAILABLE WITH -TV & -TM MOUNT STYLES) INSPECTION ON SMALLER POSITIONED PARTS WHEN USED THIS PRINT -P: PICK AND PLACE PAD WITH THE -P OR -M OPTIONS. (POS -04 THRU -36, 50 USE PPP-06, LEAD STYLE 6. MEASURE AT BEND RADIUS. SEE FIG4, SHT 2) 7. MINIMUM PUSHOUT FORCE: 3 LBS. (SEE TABLE 1) (POS -02 & -03, USE PPP-81, SEE FIG 9, SHT 2) 8. FOR -TV USE T-31724-01. -M: METAL PICK AND PLACE PAD 9. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, * PLATING SPECIFICATION * FOR EXISTING CUSTOMERS ONLY THE -LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT. -T: MATTE TIN ON ENTIRE PIN. (USE LMP-01, SEE FIG 5, SHT 2) SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL -S: 30 SELECTIVE GOLD IN CONTACT AREA, (NOT RECOMMENDED WITH -T OR -TM PLATING) ASSEMBLIES WITH THE -LC OPTION. MATTE TIN ON TAIL. 10. ONLY AVAILABLE ON -01-DV OPTION, MATES ONLY WITH (LEAD STYLES -01 & -04 ONLY) -G: 10 SELECTIVE GOLD IN CONTACT AREA, (AVAILABLE ON POS 04 THRU 36) SSM, SSW, SSQ, BCS, ESW AND ESQ. 3 SELECTIVE GOLD ON TAIL. 11. MAXIMUM ALLOWABLE CUT FLASH .010 0.25 , (AVAILABLE ON POS 02 AND 03 WITH -TR .015 0.38 ALLOWED TOWARDS TAILS. -L: 10 SELECTIVE GOLD IN CONTACT AREA, OPTION ONLY, SEE NOTE 5) 12. THIS DIMENSION TO BE MEASURED RELATIVE TO DATUM -Z-. MATTE TIN ON TAIL. -TR: TAPE AND REEL (SEE FIG 8, SHT 3) -TL: TIN/LEAD (90/10) ON ENTIRE PIN. (02 THRU 28 POS) -STL: 30 SELECTIVE GOLD IN CONTACT AREA, TIN/LEAD (90/10) ON TAIL. OPTION 2 -F: 3 SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL. POLARIZED POSITION -H: 30 SELECTIVE GOLD IN CONTACT AREA, SPECIFY OMITTED PIN 3 SELECTIVE GOLD ON TAIL. -TM: MATTE TIN ON ENTIRE PIN. OPTION 1 -SM: 30 SELECTIVE GOLD IN CONTACT AREA, (AVAILABLE FOR -DV MOUNT STYLE ONLY) MATTE TIN ON TAIL. -LC: LOCKING CLIP (SEE FIG 2, SHT 2) -LM: 10 SELECTIVE GOLD IN CONTACT AREA, (USE LC-05-TM) MATTE TIN ON TAIL. (-03 THRU -36 POS, USE 2 PER STRIP) C -FM: 3 SELECTIVE GOLD IN CONTACT AREA, (-02 POS, USE 1 PER STRIP) +.000 0.00 MATTE TIN ON TAIL. (NO OF POS x .100 2.54 ) (USE RTSM-XX-DVU) -.015 0.38 -SS: 30 STRIPE SELECTIVE GOLD IN CONTACT (SEE NOTE 9) AREA, MATTE TIN ON TAIL. (SEE NOTE 10) -A: ALIGNMENT PIN (SEE FIG 3, SHT 2) (NO OF POS -1) x .100 2.54 (FOR MOLDED TO POSITION, USE RTSM-XX-DVU-XX BODY) C RTSM-50-DVU (FOR STAKED, USE RTSM-50-DVU BODY, 5 POS MIN) 02 (LEAVE BLANK FOR NO HOLD DOWN OPTION) C USE RTSM-50-DVU SEE FIG 1, CAN BE CUT TO POSITION) MAX .200 5.08 MOUNT STYLE (SEE TABLE 1) REF -DV: DOUBLE VERTICAL -TV: TRIPLE VERTICAL (-02 THRU -30 ONLY) * (USE HTSW-50-T-LCP, SEE NOTE 8) 01 03 -TM: TRIPLE MIXED TECHNOLOGY (-02 THRU -30 ONLY) 2 MAX SWAY (USE HTSW-50-T-LCP, AVAILABLE ON -01 LEAD STYLE ONLY) 5 MAX SWAY (EITHER DIRECTION) (EITHER DIRECTION) * = FOR EXISTING CUSTOMERS ONLY .100 2.54 .025 0.64 SQ 2 MAX SWAY REF (TYP) (EITHER DIRECTION) C (SEE TABLE 1 (SEE TABLE 1 & NOTE 2) & NOTE 2) .100 2.54 REF 3 (SEE NOTE 12) -Z- SEE TABLE 5 .050.010 1.270.25 (TYP) C FIG 1 IN-PROCESS 5 (SEE NOTE 12) (SEE NOTE 6) TSM-1XX-XX-XXX-DV SHOWN -DV MOUNT STYLE PROPRIETARY NOTE * * UNLESS OTHERWISE SPECIFIED, THIS DOCUMENT CONTAINS CONFIDENTIAL AND DIMENSIONS ARE IN INCHES. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR .XX: .01 .3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .XXX: .005 .13 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS .XXXX: .0020 .051 e-Mail info SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 2:1 DESCRIPTION: INSULATOR: LCP, UL94VO, COLOR: BLACK DOUBLE ROW GULLWING ASM TERMINAL: PHOS BRONZE DWG. NO. TSM-1XX-XX-XXX-XX-X-XXX-X SHEET OF BY: BRYANT 04/24/1991 1 3 F: DWG MISC MKTG TSM-1XX-XX-XXX-XX-X-XXX-X-MKT.SLDDRWREVISION DM .045 1.14 (SEE TABLE 3) REF .110 2.79 LC-05-TM .063 1.60 REF (NO OF POS -2) x .100 2.54 2 MAX SWAY (NO OF POS -2) x .100 2.54 .048 1.21 REF (EITHER DIRECTION) 2 MAX SWAY FIG 2 FIG 3 (EITHER DIRECTION) -LC: LOCKING CLIP -A: ALIGNMENT PIN (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) .020 0.51 .020 0.51 .020 0.51 .164 4.17 .157 3.99 REF PPP-81 .390 9.91 REF PPP-06 .225 5.72 REF .270 6.86 .010 .0790 2.007 .270 6.86 REF.010 0.13 REF FIG 5 FIG 9 FIG 4 -M: METAL PICK AND PLACE PAD -P: PICK AND PLACE PAD -P: PICK AND PLACE PAD (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) (-02 & -03 POS ONLY)=((NO OF POS x .100 2.54 ) - .225 5.72 ) / 2 (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) = ((NO OF POS x .100 2.54 ) - .390 9.91 )/2 NOTE: = ((NO OF POS x .100 2.54 ) - .157 3.99)/2 HAND FILL USE LMP-01 MACHINE FILL USE LMP-01 PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail info SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING DOUBLE ROW GULLWING ASM DWG. NO. SHEET SCALE: 2:1 TSM-1XX-XX-XXX-XX-X-XXX-X F: DWG MISC MKTG TSM-1XX-XX-XXX-XX-X-XXX-X-MKT.SLDDRW SHEET OF BY: BRYANT 04/24/1991 2 3