1-phase filters FN 2330 Performance EMI filter n Rated currents from 3 to 20A Approvals n High differential and common-mode attenuation n Compact housing n UL-rated materials Technical specifications Typical electrical schematic Cx L R Cx Cy Maximum continuous operating voltage: 250VAC, 50/60Hz P P Operating frequency: dc to 400Hz Rated currents: 3 to 20A 40C max. N N High potential test voltage: P > E 2000VAC for 2 sec Cy E P > N 1100VDC for 2 sec Temperature range (operation and storage): -25C to +100C (25/100/21) Line Load Flammability corresponding to: UL 94V-2 or better Design corresponding to: UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 MTBF 40C/230V (Mil-HB-217F): 1,400,000 hours Features and benefits Typical applications n FN 2330 filters are designed for easy and n Multiple terminal connections with wire, n Electrical and electronical equipment fast chassis mounting. faston or screw. n Consumer goods n FN 2330 filters have a perfect perform- n Custom-specific versions on request. n Power supplies ance/size ratio. n Office automation equipment n All filters provide a high symmetrical and n Datacom equipment asymmetrical attenuation performance, based on chokes with high saturation resistance and excellent thermal behavior.> Components > FN 2330 Filter selection table Filter Rated current Leakage current* Inductance Capacitance Resistance Input/Output Weight 40C (25C) 230VAC/50Hz L L1 Cx Cy R connections A mA mH H F nF M g FN 2330Y-3-07 3 (3.35) 0.95 7.3 0.33 5.5 1 -07 170 FN 2330Y-10-06 10 (11.2) 0.95 7.3 0.33 5.5 1 -06 420 FN 2330X-20-10 20 (22.4) 0.69 6 0.33 4 1 -10 500 FN 2330H-20-10 20 (22.4) 1.72 6 0.33 10 1 -10 500 * Maximum leakage under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage could reach twice this level. Typical filter attenuation Per CISPR 17 A = 50/50 sym B = 50/50 asym C = 0.1/100 sym D = 100/0.1 sym 3A types 10A types 20A types (X types) 20A types (H types)