FN 410 - 3 /02 Schaffner

DATASHEET PCB Filters FN 410 High Performance Two-stage PCB-mounting EMC Filter Rated currents from 0.5 to 6 A Approvals High attenuation two-stage design PCB-mountable design The FN 410 PCB filter is a single-phase, two-stage filter designed for easy and fast PCB-mounting. Choosing the FN 410 product line brings you the rapid availability of a standard high performance filter associated with the necessary safety acceptance. Standard PCB single-phase filters are a practical solution helping you to pass EMI system approval in a short time. A selection on amperage ratings are designed to offer you the desired standard product. Features and benefits Very good conducted attenuation performance, based on chokes with high saturation resistance and excellent thermal behavior Two-stage single-phase design PCB through hole mounting Technical specifications Custom specific versions on request Maximum continuous operating voltage 250 VAC, 50/60 Hz Typical applications Operating frequency dc to 400 Hz Electrical and electronic equipment Rated currents 0.5 to 6 A 40 C max. Small to medium-sized machines and household High potential test voltage P > PE 2000 VAC for 2 sec equipment P > N 760 VAC for 2 sec Single-phase power supplies, switch-mode power Temperature range (operation and storage) -25 C to +100 C (25/100/21) supplies Design corresponding to UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 Test and measurement equipment Flammability corresponding to UL 94 V-2 or better MTBF 40C/230V (Mil-HB-217F) 675,000 hours2 EMC/EMI Products Schaffner Group Datasheets 2014 Filter selection table Filter* Rated current Leakage current* Inductance Capacitance Resistance Input/Output Weight 40 C (25 C) 230 VAC/50 Hz L1 L2 Cx Cy R connections A mA mH mH nF nF k g FN 410-0.5-02 0.5 (0.6) 373 24 24 33 2.2 -02 85 FN 410-1-02 1 (1.2) 373 10 10 33 2.2 -02 85 FN 410-3-02 3 (3.6) 373 2 2 33 2.2 -02 85 FN 410-6-02 6 (6.9) 373 0.8 0.8 33 2.2 -02 85 * Maximum leakage under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage could reach twice this level. Product selector Typical electrical schematic For example: FN 410-0.5-02, FN 410-6-02 Typical filter attenuation Per CISPR 17 A = 50 /50 sym B = 50 /50 asym C = 0.1 /100 sym D = 100 /0.1 sym 0.5 and 1 A types 3 and 6 A types Mechanical data Mechanical data All dimensions in mm 1 inch = 25.4 mm Tolerances according: ISO 2768-m / EN 22768-m Please visit www.schaffner.com to find more details on filter connectors.