FN3100-110-35 Schaffner

DATASHEET 3-Phase Filters FN 3100 EMC/EMI Filter for Regenerative Motor Drives Exceptional broadband attenuation performance Approvals from 10 kHz up to 30 MHz Equally suitable for conventional and regenerative motor drives (latter with additional line reactor only) Slim and user-friendly book-style design with (FN 3100 up to 150 A) touch-safe terminal blocks for minimum space and maximum safety Enables compliance with Class B limits Features and benefits High performance filter for mainly industrial motor drive applications with significant interference levels Attenuation performance for Class B compliance in applications comprising multiple motor drives (e.g. machine tool with up to 8 driving axes with ~10 to 20 m motor cable each) Broadband filter performance with low frequency attenuation down to 10 kHz for reliable suppression of conducted interference in applications with regenerative motor drives Slim book-style shape requiring minimum cabinet space and allowing convenient installation right beside the motor drive Touch-safe terminal blocks provide unsurpassed electrical safety and contacting cross section according to EN 60204-1 installation standard For even better filter specifications, please consider FN 3120 H series from Schaffner Typical applications Technical specifications Conventional motor drives with long motor cables and high interference levels Design corresponding to UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 Four quadrant motor drives and servo drives with Flammability corresponding to UL 94 V-2 or better energy regeneration mode (in combination with a High potential test voltage P > E 2750 VDC for 2 sec suitable line reactor) P > P 2250 VDC for 2 sec Industrial applications comprising power Maximum continuous operating voltage 3x 520/300 VAC conversion devices, such as machinery, machine MTBF @ 50C/400V (Mil-HB-217F) >400,000 hours tools and process automation equipment Operating frequency dc to 60 Hz Uninterruptible power supplies (UPS) Overload capability 4x rated current at switch on, Converters for renewable energy generation 1.5x rated current for 1 minute, once per hour Thyristor drives Protection category IP20 Rated currents 35 to 300 A @ 50 C Elevators and cranes Temperature range (operation and storage) -25 C to +100 C (25/100/21) Typical electrical schematic2 EMC/EMI Products Schaffner Group Datasheets 2014 Filter selection table Filter Rated current Typical drive Leakage current** Power loss Input/Output Weight @ 50 C (40 C) power rating* @ 400 VAC/50 Hz @ 25 C/50 Hz connections [A] [kW] [mA] [W] [kg] FN 3100-35-33 35 (38.4) 22 48.9 11.8 -33 2.3 FN 3100-50-34 50 (54.8) 30 66.1 18.0 -34 3.4 FN 3100-80-35 80 (87.6) 45 71.5 25.9 -35 5.3 FN 3100-110-35 110 (120.5) 55 71.5 32.7 -35 5.4 FN 3100-150-40 150 (164.3) 75 71.5 50.6 -40 8.5 FN 3100-200-40 200 (219) 110 71.5 67.2 -40 9.1 FN 3100-230-40 230 (230) 132 71.5 36.5 -40 9.2 FN 3100-300-99 300 (329) 160 71.5 54.0 -99 11.8 * Calculated at rated current, 480 VAC and cos phi = 0.8. The exact value depends upon the efficiency of the drive, the motor and the entire application. ** Maximum leakage under normal operating conditions. Note: if two phases are interrupted, worst case leakage could reach 5.3 times higher levels. Typical filter attenuation Per CISPR 17; A = 50 /50 sym; B = 50 /50 asym; C = 0.1 /100 sym; D = 100 /0.1 sym 35 to 80 A types 110 and 150 A types 200 A types 230 and 300 A types d B d B d B d B 7 0 7 0 7 0 7 0 6 0 6 0 6 0 6 0 5 0 5 0 5 0 5 0 A B B B 4 0 4 0 4 0 4 0 D 3 0 3 0 3 0 3 0 A A A B 2 0 2 0 2 0 2 0 1 0 1 0 1 0 1 0 D C D D C 0 0 0 0 -1 0 -1 0 -1 0 -1 0 C C -2 0 -2 0 -2 0 -2 0 1 0 k 1 0 0 k 1 M 1 0 M 1 0 k 1 0 0 k 1 M 1 0 M 1 0 k 1 0 0 k 1 M 1 0 M 1 0 k 1 0 0 k 1 M 1 0 M