Product data sheet ABL8RPS24100 Characteristics Phaseo universal power supply, 1 or 2 phase, 100 to 500 V, 24 V, 10 A Product availability: Stock - Normally stocked in distribution facility Main Range of product Phaseo Product or component Power supply type Power supply type Regulated switch mode Input voltage 100...120 V AC single phase, terminal(s): N-L1 200...500 V AC phase to phase, terminal(s): L1-L2 Output voltage 24 V DC Rated power in W 240 W Provided equipment Power factor correction filter conforming to IEC 61000-3-2 Power supply output 10 A current Output protection type Against overload, protection technology: manual or automatic reset Against overvoltage, protection technology: 30...32 V, manual reset Against short-circuits, protection technology: manual or automatic reset Against undervoltage, protection technology: tripping if U < 21.6 V Thermal, protection technology: automatic reset Ambient air temperature 122...140 F (50...60 C) with for operation -13...122 F (-25...50 C) without Complementary Input voltage limits 170...550 V 85...132 V Network frequency 47...63 Hz Inrush current 30 A for 2 ms Cos phi 0.068 at 240 V 0.069 at 120 V Efficiency 87 % Output voltage limits 24...28.8 V adjustable Power dissipation in W 31 W Line and load regulation 1...3 % Holding time >= 120 ms at 400 V >= 20 ms at 100 V >= 40 ms at 240 V Permissible temporary current boost 1.5 x In for 4 s Connections - terminals Screw type terminals input connection, connection capacity: 3 x 0.5...3 x 4 mm AWG 22...AWG 12 Screw type terminals input ground connection, connection capacity: 1 x 0.5...1 x 4 mm AWG 22...AWG 12 Screw type terminals output connection, connection capacity: 4 x 0.5...4 x 4 mm AWG 22...AWG 12 Screw type terminals output ground connection, connection capacity: 1 x 0.5...1 x 4 mm AWG 22...AWG 12 Removable screw terminal block diagnostic relay, connection capacity: 2 x 2.5 mm Marking CE Mounting support 35 x 7.5 mm symmetrical DIN rail 35 x 15 mm symmetrical DIN rail Operating position Vertical Operating altitude 6561.68 ft (2000 m) Aug 9, 2019 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Output coupling Parallel Series Name of test Harmonic current emission conforming to EN/IEC 61000-3-2 Conducted emissions on the power line conforming to EN 55022 Class B Electrostatic discharges conforming to EN/IEC 61000-4-2 Induced electromagnetic field conforming to EN/IEC 61000-4-6 Magnetic field conforming to EN 61000-4-8 Primary outage conforming to IEC 61000-4-11 Radiated electromagnetic field conforming to EN/IEC 61000-4-3 Radiated emissions conforming to EN 55022 Class B Rapid transient conforming to IEC 61000-4-4 Surge conforming to EN/IEC 61000-4-5 Status LED 1 LED green and red output voltage 1 LED green, red and orange output current Depth 5.71 in (145 mm) Height 5.63 in (143 mm) Width 3.39 in (86 mm) Product weight 2.2 lb(US) (1 kg) Environment Product certifications RCM EAC CCSAus KC UL Standards UL 508 CSA C22.2 No 60950-1 Environmental characteristic EMC conforming to EN 55024 EMC conforming to EN 61000-6-1 EMC conforming to EN 61000-6-3 EMC conforming to EN/IEC 61000-6-4 EMC conforming to EN/IEC 61204-3 Safety conforming to EN/IEC 60950-1 Safety conforming to EN/IEC 61204-3 Safety conforming to SELV IP degree of protection IP20 conforming to EN/IEC 60529 Ambient air temperature for storage -40...158 F (-40...70 C) Relative humidity 0...90 % during operation 0...95 % in storage Overvoltage category Class I conforming to VDE 0106-1 Dielectric strength Between input and ground Between output and ground Between input and output MTBF reliability 613500 H at 100 V AC with UTE C80-810 calculation method 892000 H at 200...500 V AC with UTE C80-810 calculation method Ordering and shipping details Category 22525 - ABL8 AND ABL7 POWER SUPPLIE Discount Schedule CP12 GTIN 00785901498964 Nbr. of units in pkg. 1 Package weight(Lbs) 3.5800000000000001 Returnability Y Country of origin PH Offer Sustainability Sustainable offer status Green Premium product RoHS (date code: YYWW) Compliant - since 0501 - Schneider Electric declaration of conformity Schnei- der Electric declaration of conformity REACh Reference not containing SVHC above the threshold Product environmental profile Available Product end of life instructions Available California proposition 65 WARNING: This product can expose you to chemicals including: 2