ARTESYN ADN-C SERIES 3-PHASE 120-960 Watts The ADN-C series of three-phase DIN rail mounting AC-DC DATA SHEET power supplies is ideal for a wide range of heavy duty industrial applications especially those involving large Total Power: inductive loads including machine control, semiconductor 120-960 Watts fabrication, conveyor and material handling systems. These highly efficient ultra compact 24 Vdc output power supplies Input Voltage: operate directly from three-phase inputs and accommodate 380-480 Vac virtually all standard line voltages worldwide. Outputs: Single DC OK relay SPECIAL FEATURES Parallel operation capability Slim form factor Screw terminal connections Five year warranty RoHS compliant High efficiency up to 94% No tools required for mounting Full power at 60 C SAFETY Power Boost Industrial grade design UL508, cULus Listed Metal case nd UL 60950-1, cURus 2 edition MTBF > 500,000h nd IEC60950-1 2 edition Adjustable output Class I, Div 2 Hazardous Locations Overvoltage protection with auto IP20 recovery CE Continuous short circuit and overload protection New visual diagnostic LED Three Status LEDs Input Output Alarm 2020 Advanced Energy Industries, Inc.ADN-C SERIES 3-PHASE ELECTRICAL SPECIFICATIONS Input Nominal voltage 380 - 480 Vac AC input range 320 - 540 Vac DC input range 450 - 760 Vdc for ADN5, ADN10 & ADN20 Frequency 50 - 60 Hz Efficiency Up to 94% PFC Active power factor correction for ADN20 & ADN40 meet EN61000-3-2 Class A Phase input ADN5 and ADN10 will operate with single phase input at 100% load Derate to 75% and 50% for ADN20 and ADN40 respectively under loss of 1 phase Units will shut down if thermal threshold is exceeded under this condition Output Nominal voltage 24 V (24.0 - 28.0 Vdc Adj.) Hold-up time > 20 ms for ADN5, ADN10 & ADN20 > 15 ms for ADN40 Voltage regulation < 2% overall Ripple < 100 mVpp Current limit PowerBoost Peak current 2x nominal current for < 2 sec for ADN5 & ADN10 1.5x nominal current for 4 seconds minimum while holding voltage > 20 Vdc for ADN20 & ADN40 Parallel operation Single or parallel operation selectable via front switch. For redundant operation use of external diode module is preferred ADN40 uses active paralleling Power back immunity < 35 V Overvoltage protection > 30.5 Vdc, but < 33 Vdc, auto recovery GENERAL SPECIFICATIONS EMC emissions EN61000-6-3:2001, Class B EN55011, EN55022 Radiated and Conducted including Annex. A, EN61000-3-2 EMC immunity EN61000-6-1:2001, EN61000-6-2:2001, EN61000-4-2 Level 4, EN61000-4-3 Level 3, EN61000-4-6 Level 3, EN61000-4-4 Level 4 input and level 3 output. EN61000-4-5 Isolation class 4, EN61000-4-11, Semi F47 sag immunity Warranty 5 Years General protection safety Protected against continuous short-circuit, overload, open-circuit. Protection Class 1 (IEC536), degree of protection IP20 (IEC 60529) Safe low voltage: SELV (acc. EN60950) Status indicators Visual: 3 status LEDs (Input, Output, Alarm) Relay: SSR or dry relay contact, signal octive when Vout = 18.5 vdc + 5% 2 advancedenergy.com