Product data sheet ATV61HD45N4 Characteristics SPEED DRIVE,60HP,460V,ATV61 Main Range of Product Altivar 61 Product or Component Variable speed drive Type Product Specific Pumping and ventilation machine Application Component name ATV61 Motor power kW 45kW, 3 phase 380...480 V Maximum Horse Power 60hp, 3 phase 380...480 V Rating Power supply voltage 380...480 V - 15...10 % Supply number of 3 phase phases Line current 104A 380 V 3 phase 45kW / 60hp 85A 480 V 3 phase 45kW / 60hp EMC filter Level 3 EMC filter Assembly style With heat sink Apparent power 68.5kVA 380 V 3 phase 45kW / 60hp Maximum prospective 22kA 3 phase line Isc Maximum transient 112.8A 60 s, 3 phase current Nominal switching 12 kHz frequency Switching frequency 1...16 kHz adjustable 12...16 kHz with derating factor Asynchronous motor Flux vector control without sensor, standard control Voltage/Frequency ratio, 5 points Voltage/Frequency ratio, 2 points Voltage/frequency ratio - Energy Saving, quadratic U/f Synchronous motor Vector control without sensor, standard control profile Communication Port Modbus Protocol CANopen Type of polarization No impedance Modbus Option card Communication card APOGEE FLN Communication card BACnet Communication card CC-Link Controller inside programmable card Communication card DeviceNet Communication card EtherNet/IP Communication card Fipio I/O extension card Communication card Interbus-S Communication card LonWorks Communication card METASYS N2 Communication card Modbus Plus Communication card Modbus TCP Communication card Modbus/Uni-Telway Multi-pump card Communication card Profibus DP Communication card Profibus DP V1 Jan 18, 2022 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Complementary Product destination Synchronous motors Asynchronous motors Power supply voltage limits 323528V Power supply frequency 50...60 Hz - 5...5 % Power supply frequency limits 47.5...63 Hz Continuous output current 77A 12 kHz, 460 V - 3 phase 94A 12 kHz, 380 V - 3 phase Output frequency 0.1500Hz Speed range 1100 in open-loop mode, without speed feedback Speed accuracy +/- 10 % of nominal slip 0.2 Tn to Tn without speed feedback Torque accuracy +/- 15 % in open-loop mode, without speed feedback Transient overtorque 130% of nominal motor torque +/- 10 % 60 s Braking torque <= 125 % with braking resistor 30 % without braking resistor Regulation loop Frequency PI regulator Motor slip compensation Can be suppressed Automatic whatever the load Not available in voltage/frequency ratio (2 or 5 points) Adjustable Diagnostic For drive voltage 1 LED (red) Output voltage <= power supply voltage Electrical isolation Between power and control terminals Type of cable for mounting in an enclosure With an IP21 or an IP31 kit 3 IEC cable 104F (40C), copper 70 C / PVC With UL Type 1 kit 3 UL 508 cable 104F (40C), copper 75 C / PVC Without mounting kit 1 IEC cable 113F (45C), copper 70 C / PVC Without mounting kit 1 IEC cable 113F (45C), copper 90 C / XLPE/EPR Electrical connection Terminal 2.5 mm / AWG 14 AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR) Terminal 150 mm / 300 kcmil L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/ +, PA, PB) Tightening torque 5.31Lbf.In (0.6N.m) AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR) 362.88lbf.in (41N.m), 360 lb.in L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB) Supply Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC, +/- 5 %, <10mA overload and short-circuit protection Internal supply 24 V DC 2127V), <200mA overload and short-circuit protection External supply 24 V DC 1930V) Analogue input number 2 Analogue input type AI1-/Al1+ bipolar differential voltage +/- 10 V DC 24 V max 11 bits + sign AI2 software-configurable current 0...20 mA 242 Ohm 11 bits AI2 software-configurable voltage 0...10 V DC 24 V max 30000 Ohm 11 bits Sampling time 2Ms +/- 0.5 ms AI1-/Al1+) - analog input 2Ms +/- 0.5 ms Al2) - analog input 2Ms +/- 0.5 ms AO1) - analog output 2Ms +/- 0.5 ms LI1...LI5) - discrete input 2ms +/- 0.5 ms LI6)if configured as logic input - discrete input Absolute accuracy precision +/- 0.6 % AI1-/Al1+) for a temperature variation 60 C +/- 0.6 % AI2) for a temperature variation 60 C +/- 1 % AO1) for a temperature variation 60 C Linearity error +/- 0.15 % of maximum value AI1-/Al1+) +/- 0.15 % of maximum value AI2) +/- 0.2 % AO1) Analogue output number 1 Analogue output type AO1 software-configurable current 0...20 mA 500Ohm 10 bits AO1 software-configurable voltage 0...10 V DC 470Ohm 10 bits AO1 software-configurable logic output 10 V, 20mA Discrete output number 2 Discrete output type Configurable relay logic R1A, R1B, R1C) NO/NC - 100000cycles Configurable relay logic R2A, R2B) NO - 100000cycles Maximum response time <= 100 ms in STO (Safe Torque Off) R1A, R1B, R1C <= 7 ms +/- 0.5 ms R2A, R2B <= 7 ms +/- 0.5 ms 2