FSG2NE Schneider

Product data sheet FSG2NE Characteristics pressure switch FSG 4.6 bar - adjustable scale 2 thresholds - 2NC Main Commercial Status Commercialised Range of product OsiSense XM Pressure sensor type Electromechanical pressure sensor Pressure sensor name FSG Pressure sensor size 4.6 bar Fluid connection type G 1/4 (female) conforming to ISO 228 Controlled fluid Sea water (0...70 C) Fresh water (0...70 C) Cable entry 2 entries incorporating Pg 13.5 plastic cable gland, cable outer diameter: 9...13 mm conforming to NF C 68-300 Contacts type and com- 2 NC snap action position Product specific appli- - cation Pressure switch type of Regulation between 2 thresholds operation In rated current 10 A at 250 V AC conforming to EN 60730-1 Electrical connection Screw-clamp terminals, clamping capacity: 1 x 1...2 x 2 mm Short circuit protection 20 A cartridge fuse type gG Scale type Adjustable differential Setting Internal Local display Without Electrical circuit type Power circuit Complementary Materials in contact with fluid Nitrile Nylon 6/6 Zinc plated steel Enclosure material PS Operating position Any position Motor power kW 2.2 kW 3 hp AC 400 V 3 phases 2.2 kW 3 hp AC 230 V 3 phases 1.5 kW 2 hp AC 400 V 1 phase 1.5 kW 2 hp AC 230 V 1 phase 1.1 kW 1.5 hp AC 110 V 3 phases 0.75 kW 1 hp AC 110 V 1 phase Adjustable range of switching point on falling pres- 0.3...3.4 bar sure Adjustable range of switching point on rising pres- 1.4...4.6 bar sure Possible differential minimum at low setting 1 bar Possible differential minimum at high setting 1.2 bar Possible differential maximum at low setting 2.1 bar Possible differential maximum at high setting 2.3 bar Maximum permissible accidental pressure 8 bar Maximum permissible pressure - per cycle 5.75 bar Destruction pressure 20 bar Pressure actuator Diaphragm Oct 1, 2015 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Electrical durability 100000 cycles at 10 cyc/mn Mechanical durability 1000000 cycles Terminal block type 4 terminals Possible differential minimum at middle setting 1.1 bar Possible differential maximum at middle setting 2.2 bar Operating rate 10 cyc/mn Ui rated insulation voltage 500 V conforming to EN/IEC 60947-1 Uimp rated impulse withstand voltage 6 kV conforming to EN/IEC 60947-1 Product weight 0.36 kg Repeat accuracy < 2 % Terminals description ISO n1 (1-2)NC (3-4)NC Depth 106 mm Height 115 mm Width 72 mm Environment Standards CE EN/IEC 60730 Ambient air temperature for operation 0...45 C Ambient air temperature for storage -30...80 C Protective treatment TC Class of protection against electric shock Class I conforming to IEC 536 IP degree of protection IP65 conforming to EN/IEC 60529 Offer Sustainability Sustainable offer status Green Premium product RoHS Compliant - since 0627 - Schneider Electric declaration of conformity REACh Reference not containing SVHC above the threshold Product environmental profile Available Download Product Environmental Product end of life instructions Available Download End Of Life Manual 2