LC1D096BL Schneider

Product data sheet LC1D096BL Characteristics TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A - 24 V DC coil Product availability: Stock - Normally stocked in distribution facility Price*: 119.00 USD Main Commercial Status Commercialised Range of product TeSys D Product or component Contactor type Device short name LC1D Contactor application Motor control Resistive load Utilisation category AC-1 AC-3 Poles description 3P Pole contact 3 NO composition Ue rated operational <= 300 V DC for power circuit voltage <= 690 V AC 25...400 Hz for power circuit Ie rated operational 9 A (<= 140 F (60 C)) at <= 440 V AC AC-3 for power current circuit 25 A (<= 140 F (60 C)) at <= 440 V AC AC-1 for power circuit Motor power kW 5.5 kW at 660...690 V AC 50/60 Hz 5.5 kW at 500 V AC 50/60 Hz 4 kW at 415...440 V AC 50/60 Hz 4 kW at 380...400 V AC 50/60 Hz 2.2 kW at 220...230 V AC 50/60 Hz Motor power hp 7.5 hp at 575/600 V AC 50/60 Hz for 3 phases motors 5 hp at 460/480 V AC 50/60 Hz for 3 phases motors 2 hp at 230/240 V AC 50/60 Hz for 3 phases motors 2 hp at 200/208 V AC 50/60 Hz for 3 phases motors 1 hp at 230/240 V AC 50/60 Hz for 1 phase motors 0.5 hp at 115 V AC 50/60 Hz for 1 phase motors Control circuit type DC low consumption Control circuit voltage 24 V DC Auxiliary contact 1 NO + 1 NC composition Uimp rated impulse 6 kV conforming to IEC 60947 withstand voltage Overvoltage category III Ith conventional free 10 A at <= 140 F (60 C) for signalling circuit air thermal current 25 A at <= 140 F (60 C) for power circuit Irms rated making 250 A DC for signalling circuit conforming to IEC capacity 60947-5-1 140 A AC for signalling circuit conforming to IEC 60947-5-1 250 A at 440 V for power circuit conforming to IEC 60947 Rated breaking 250 A at 440 V for power circuit conforming to IEC 60947 capacity Icw rated short-time 61 A <= 104 F (40 C) 1 min power circuit withstand current 30 A <= 104 F (40 C) 10 min power circuit 140 A 100 ms signalling circuit 120 A 500 ms signalling circuit 100 A 1 s signalling circuit 210 A <= 104 F (40 C) 1 s power circuit 105 A <= 104 F (40 C) 10 s power circuit Nov 3, 2015 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. *Prices are indicativeAssociated fuse rating 20 A gG at <= 690 V coordination type 2 for power circuit 25 A gG at <= 690 V coordination type 1 for power circuit 10 A gG for signalling circuit conforming to IEC 60947-5-1 Average impedance 2.5 mOhm at 50 Hz - Ith 25 A for power circuit Ui rated insulation 600 V for signalling circuit certifications UL voltage 600 V for signalling circuit certifications CSA 690 V for signalling circuit conforming to IEC 60947-1 600 V for power circuit certifications UL 600 V for power circuit certifications CSA 690 V for power circuit conforming to IEC 60947-4-1 Electrical durability 2 Mcycles 9 A AC-3 at Ue <= 440 V 0.6 Mcycles 25 A AC-1 at Ue <= 440 V Power dissipation per AC-3 pole 1.56 W AC-1 Protective cover With Mounting support Plate Rail Standards EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508 CSA C22.2 No 14 Product certifications BV CCC CSA DNV GL GOST RINA UL LROS Connections - terminals Power circuit: lugs-ring terminals - external diameter: 0.31 in (8 mm) Control circuit: lugs-ring terminals - external diameter: 0.31 in (8 mm) Tightening torque Power circuit: 15.04 lbf.in (1.7 N.m) - on lugs-ring terminals - with screwdriver Philips No 2 screw : M3.5 Power circuit: 15.04 lbf.in (1.7 N.m) - on lugs-ring terminals - with screwdriver flat 8 mm screw : M3.5 Control circuit: 15.04 lbf.in (1.7 N.m) - on lugs-ring terminals - with screwdriver Philips No 2 screw : M3.5 Control circuit: 15.04 lbf.in (1.7 N.m) - on lugs-ring terminals - with screwdriver flat 6 mm screw : M3.5 Operating time 20...30 ms opening 65.45...88.55 ms closing Safety reliability level B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 Mechanical durability 30 Mcycles Operating rate 3600 cyc/h at <= 140 F (60 C) Complementary Coil technology Built-in bidirectional peak limiting diode suppressor Control circuit voltage limits 0.8...1.25 Uc at 140 F (60 C) operational 0.1...0.3 Uc at 140 F (60 C) drop-out Time constant 40 ms Inrush power in W 2.4 W at 68 F (20 C) Hold-in power consumption in W 2.4 W at 68 F (20 C) Auxiliary contacts type Type mirror contact (1 NC) conforming to IEC 60947-4-1 Type mechanically linked (1 NO + 1 NC) conforming to IEC 60947-5-1 Signalling circuit frequency 25...400 Hz 2