LC1DT32F7

Product datasheet LC1DT32F7 Characteristics TeSys D contactor - 4P(4 NO) - AC-1 - <= 440 V 32 A - 110 V AC 50/60 Hz coil Main Range TeSys Product name TeSys D Product or component type Contactor Device short name LC1D Contactor application Resistive load Utilisation category AC-1 Poles description 4P Pole contact composition 4 NO Ue rated operational voltage <= 690 V AC 25...400 Hz for power circuit <= 300 V DC for power circuit Ie rated operational current 32 A (<= 60 C) at <= 440 V AC AC-1 for power circuit Control circuit type AC 50/60 Hz Control circuit voltage 110 V AC 50/60 Hz Auxiliary contact composition 1 NO + 1 NC Uimp rated impulse withstand 6 kV conforming to IEC 60947 voltage Overvoltage category III Ith conventional free air thermal 32 A at <= 60 C for power circuit current 10 A at <= 60 C for signalling circuit Irms rated making capacity 300 A at 440 V for power circuit conforming to IEC 60947 140 A AC for signalling circuit conforming to IEC 60947-5-1 250 A DC for signalling circuit conforming to IEC 60947-5-1 Rated breaking capacity 300 A at 440 V for power circuit conforming to IEC 60947 Icw rated short-time withstand 145 A <= 40 C 10 s power circuit current 240 A <= 40 C 1 s power circuit 40 A <= 40 C 10 min power circuit 84 A <= 40 C 1 min power circuit 100 A 1 s signalling circuit 120 A 500 ms signalling circuit 140 A 100 ms signalling circuit Associated fuse rating 35 A gG at <= 690 V coordination type 2 for power circuit 50 A gG at <= 690 V coordination type 1 for power circuit 10 A gG for signalling circuit conforming to IEC 60947-5-1 Average impedance 2.5 mOhm at 50 Hz - Ith 32 A for power circuit Ui rated insulation voltage 600 V for power circuit certifications CSA 600 V for power circuit certifications UL 690 V for power circuit conforming to IEC 60947-4- 1 690 V for signalling circuit conforming to IEC 60947-1 600 V for signalling circuit certifications CSA 600 V for signalling circuit certifications UL Electrical durability 1 Mcycles 32 A AC-1 at Ue <= 440 V Power dissipation per pole 2.5 W AC-1 Protective cover With Mounting support Plate Rail 1 / 3 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Standards EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508 CSA C22.2 No 14 Product certifications BV CCC CSA DNV GL GOST RINA UL LROS Connections - terminals Control circuit : screw clamp terminals 2 cable(s) 1...2.5 mm - cable stiffness: flexible - with cable end Control circuit : screw clamp terminals 1 cable(s) 1...4 mm - cable stiffness: flexible - without cable end Control circuit : screw clamp terminals 2 cable(s) 1...4 mm - cable stiffness: flexible - without cable end Control circuit : screw clamp terminals 1 cable(s) 1...4 mm - cable stiffness: flexible - with cable end Control circuit : screw clamp terminals 1 cable(s) 1...4 mm - cable stiffness: solid - without cable end Control circuit : screw clamp terminals 2 cable(s) 1...4 mm - cable stiffness: solid - without cable end Power circuit : connector 1 cable(s) 2.5...10 mm - cable stiffness: flexible - without cable end Power circuit : connector 2 cable(s) 2.5...10 mm - cable stiffness: flexible - without cable end Power circuit : connector 1 cable(s) 2.5...10 mm - cable stiffness: flexible - with cable end Power circuit : connector 2 cable(s) 2.5...10 mm - cable stiffness: flexible - with cable end Power circuit : connector 1 cable(s) 2.5...16 mm - cable stiffness: solid - without cable end Power circuit : connector 2 cable(s) 2.5...16 mm - cable stiffness: solid - without cable end Tightening torque Control circuit : 1.7 N.m - on screw clamp terminals - with screwdriver flat 6 mm Control circuit : 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2 Power circuit : 1.7 N.m - on connector - with screwdriver flat 6 mm Power circuit : 1.7 N.m - on connector - with screwdriver Philips No 2 Operating time 4...19 ms opening 12...22 ms closing Safety reliability level B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 Mechanical durability 15 Mcycles Operating rate 3600 cyc/h at <= 60 C Complementary Coil technology Without built-in suppressor module Control circuit voltage limits 0.3...0.6 Uc at 60 C drop-out 50/60 Hz 0.8...1.1 Uc at 60 C operational 50 Hz 0.85...1.1 Uc at 60 C operational 60 Hz Inrush power in VA 70 VA at 20 C (cos 0.75) 60 Hz 70 VA at 20 C (cos 0.75) 50 Hz Hold-in power consumption in VA 7.5 VA at 20 C (cos 0.3) 60 Hz 7 VA at 20 C (cos 0.3) 50 Hz Heat dissipation 2...3 W at 50/60 Hz Auxiliary contacts type Type mechanically linked (1 NO + 1 NC) conforming to IEC 60947-5-1 2 / 3