LC1DT32U7 Schneider

Product data sheet LC1DT32U7 Characteristics TeSys D contactor - 4P(4 NO) - AC-1 - <= 440 V 32 A - 240 V AC coil Main Range of product TeSys D Product or component Contactor type Device short name LC1D Contactor application Resistive load Utilisation category AC-1 Poles description 4P Power pole contact 4 NO composition Ue rated operational <= 690 V AC 25...400 Hz for power circuit voltage <= 690 V DC for power circuit Ie rated operational 32 A (<= 60 C) at <= 440 V AC AC-1 for power cir- current cuit Control circuit type AC 50/60 Hz Control circuit voltage 240 V AC 50/60 Hz Auxiliary contact com- 1 NO + 1 NC position Uimp rated impulse 6 kV conforming to IEC 60947 withstand voltage Overvoltage category III Ith conventional free 10 A at <= 60 C for signalling circuit air thermal current 32 A at <= 60 C for power circuit Irms rated making ca- 140 A AC for signalling circuit conforming to IEC pacity 60947-5-1 250 A DC for signalling circuit conforming to IEC 60947-5-1 300 A at 440 V for power circuit conforming to IEC 60947 Rated breaking capac- 300 A at 440 V for power circuit conforming to IEC ity 60947 Icw rated short-time 100 A 1 s signalling circuit withstand current 120 A 500 ms signalling circuit 140 A 100 ms signalling circuit 40 A <= 40 C 10 min power circuit 84 A <= 40 C 1 min power circuit 145 A <= 40 C 10 s power circuit 240 A <= 40 C 1 s power circuit Associated fuse rating 10 A gG for signalling circuit conforming to IEC 60947-5-1 50 A gG at <= 690 V coordination type 1 for power circuit 35 A gG at <= 690 V coordination type 2 for power circuit Average impedance 2.5 mOhm at 50 Hz - Ith 32 A for power circuit Ui rated insulation 690 V for power circuit conforming to IEC 60947-4-1 voltage 600 V for power circuit certifications CSA 600 V for power circuit certifications UL 690 V for signalling circuit conforming to IEC 60947-1 600 V for signalling circuit certifications CSA 600 V for signalling circuit certifications UL Power dissipation per 2.5 W AC-1 pole Safety cover With Mounting support Plate Rail Nov 9, 2011 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Standards EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508 CSA C22.2 n14 Product certifications BV CCC CSA DNV GL GOST RINA UL LROS Connections - terminals Control circuit: screw clamp terminals 1 cable(s) 1...4 mm - cable stiffness: flexible - without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm - cable stiffness: flexible - without cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm - cable stiffness: flexible - with cable end Control circuit: screw clamp terminals 2 cable(s) 1...2.5 mm - cable stiffness: flexible - with cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm - cable stiffness: solid - without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm - cable stiffness: solid - without cable end Power circuit: screw clamp terminals 1 cable(s) 2.5...10 mm - cable stiffness: flexible - without cable end Power circuit: screw clamp terminals 2 cable(s) 2.5...10 mm - cable stiffness: flexible - without cable end Power circuit: screw clamp terminals 1 cable(s) 2.5...10 mm - cable stiffness: flexible - with cable end Power circuit: screw clamp terminals 2 cable(s) 2.5...10 mm - cable stiffness: flexible - with cable end Power circuit: screw clamp terminals 1 cable(s) 2.5...16 mm - cable stiffness: solid - without cable end Power circuit: screw clamp terminals 2 cable(s) 2.5...16 mm - cable stiffness: solid - without cable end Tightening torque Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat 6 mm Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2 Power circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat 6 mm Power circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2 Operating time 4...19 ms opening 12...22 ms closing Safety reliability level B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 Mechanical durability 15 Mcycles (millions) Operating rate 3600 cyc/h at <= 60 C 2