XMLA004A2S11 Schneider

Product data sheet XMLA004A2S11 Characteristics pressure switch XMLA 4 bar - fixed scale 1 threshold - 1 C/O Main Range of product OsiSense XM Product or component Electromechanical pressure sensor type Pressure sensor type Electromechanical pressure sensor Product specific appli- - cation Pressure sensor name XMLA Electrical circuit type Control circuit Pressure swt type of Detection of 1 single threshold operation Type of scale Fixed differential Pressure sensor size 4 bar Local display With Fluid connection type G 1/4 (female) conforming to ISO 228 Adj range low setting 0.05...3.65 bar Adj range high setting 0.4...4 bar Max perm accidental 9 bar pressure Destruction pressure 18 bar Electrical connection Screw-clamps terminals 1 x 0.2...2 x 2.5 mm Cable entry 1 entry tapped for Pg 13.5 cable gland, cable outer diameter: 9 - 13 mm Pressure actuator Diaphragm Controlled fluid Air (0 - 70 C) Fresh water (0 - 70 C) Hydraulic oil (0 - 70 C) Sea water (0 - 70 C) Materials in contact wth Nitrile fluid Zinc alloy Enclosure material Zinc alloy In rated current B300, AC-15 (Ue = 120 V conforming to EN/IEC 60947-5-1 B300, AC-15 (Ue = 240 V conforming to EN/IEC 60947-5-1 R300, DC-13 (Ue = 250 V conforming to EN/IEC 60947-5-1 Contacts type and com- 1 C/O position Complementary Natural diff at low setting 0.35 bar (+/- 0.03 bar) Natural diff at high setting 0.35 bar (+/- 0.03 bar) Max perm pressure - per cycle 5 bar Terminal block type 4 terminals Operating rate <= 120 cyc/mn at > 0 C Repeat accuracy < 2 % Ui rated insulation voltage 300 V conforming to CSA C22-2 No 14 300 V conforming to UL 508 500 V conforming to EN/IEC 60947-1 Uimp rated imp wstdvoltage 6 kV conforming to EN/IEC 60947-1 Auxiliary contacts operation Snap action Contacts material Silver contacts Jul 2, 2018 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Resistance across terminals < 25 mOhm conforming to IEC 255-7 category 3 < 25 mOhm conforming to NF C 93-050 method A Short circuit protection 10 A cartridge fuse type gG (gl) Mechanical durability 8000000 cycles Setting External Product weight 0.685 kg Terminals description ISO n1 (13-14-11-12)OF Height 75 mm Depth 113 mm Width 35 mm CAD overall depth 75 mm CAD overall height 113 mm CAD overall width 35 mm Environment Standards CE CSA C22-2 No 14 EN/IEC 60947-5-1 UL 508 Product certifications BV CCC CSA DNV (Det Norske Veritas) GL LROS (Lloyds register of shipping) RINA UL VIT-SEPRO Protective treatment TC Ambient air temp for op -25...70 C Ambient air temp for storage -40...70 C Operating position Any position Vibration resistance 4 gn (f = 30 - 500 Hz) conforming to IEC 68-2-6 Shock resistance 50 gn conforming to IEC 68-2-27 Class of prot agnst elec shock Class I conforming to IEC 1140 Class I conforming to IEC 536 Class I conforming to NF C 20-030 IP degree of protection IP66 conforming to EN/IEC 60529 2