XMLR001G1P26 Schneider

Product data sheet XMLR001G1P26 Characteristics Pressure sensors XMLR 1bar - 1/4 18 NPT - 24VDC - 4..20 mA - PNP - M12 Product availability: Non-Stock - Not normally stocked in distribution facility Main Range of product OsiSense XM Product or component Electronic pressure sensors type Pressure sensor type Pressure transmitter Pressure switch type of Pressure transmitter with 1 switching output operation Device short name XMLR Pressure sensor size 14.5 psi (1 bar) 100 kPa 14.5 psi Maximum permissible 108.78 psi (7.5 bar) accidental pressure 109 psi 750 kPa Destruction pressure 109 psi 750 kPa 108.78 psi (7.5 bar) Controlled fluid Fresh water (32...176 F (0...80 C)) Air (-20...80 C) Hydraulic oil (-20...80 C) Refrigeration fluid (-20...80 C) Fluid connection type 1/4 - 18 NPT (female) Us rated supply volt- 24 V DC SELV, voltage limits: 17...33 V age Complementary Current consumption <= 50 mA Electrical connection 4 pins M12 male connector Analogue output function 4...20 mA Type of output signal Analogue + discrete Analogue output function 4...20 mA Discrete output type Solid state PNP, NO/NC programmable Maximum switching current 250 mA Contacts type and composition NO/NC programmable Scale type Fixed differential Voltage drop <= 2 V Adjustable range of switching point on rising pres- 1.16...14.5 psi (0.08...1 bar) sure 8...100 kPa 1.16...14.5 psi Adjustable range of switching point on falling pres- 5...97 kPa sure 0.73...14.07 psi (0.05...0.97 bar) 0.73...14.1 psi Minimum differential travel 0.44 psi (0.03 bar) 0.43 psi 3 kPa Materials in contact with fluid Fluorocarbon FKM (Viton) Ceramic 316L stainless steel Front material Polyester Housing material Polyacrylamide 316L stainless steel Operating position Any position, but disposals can falsified the measurement in case of upside down mounting Aug 11, 2019 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Protection type Overload protection Reverse polarity Overvoltage protection Short-circuit protection Response time on output <= 10 ms analog output <= 5 ms discrete output Switching output time delay 0...50 s in steps of 1 second Display type 4 digits 7 segments Local signalling 1 LED yellow light ON when switch is actuated Display response time type Fast 50 ms Normal 200 ms Slow 600 ms Delay first up <= 300 ms Overall accuracy <= 1 % of the measuring range Linearity error on analogue output <= 0.5 % of the measuring range Hysteresis on analogue output <= 0.2 % of the measuring range Measurement accuracy on switching output <= 0.6 % of the measuring range Repeat accuracy <= 0.2 % of the measuring range Drift of the sensitivity +/- 0.03 % of measuring range/C Drift of the zero point +/- 0.1 % of measuring range/C Display accuracy <= 1 % of the measuring range Mechanical durability >= 10000000 cycles Depth 1.65 in (42 mm) Height 3.94 in (100 mm) Width 1.61 in (41 mm) Product weight 0.47 lb(US) (0.212 kg) Uimp rated impulse withstand voltage 0.5 kV DC Electromagnetic compatibility Electrostatic discharge immunity test - test level 8 kV air, 4 kV contact conforming to EN/IEC 61000-4-2 Susceptibility to electromagnetic fields - test level 10 V/m (80...2000 MHz) con- forming to EN/IEC 61000-4-3 Electrical fast transient/burst immunity test - test level 2 kV conforming to EN/IEC 61000-4-4 Surge immunity test - test level 1 kV conforming to EN/IEC 61000-4-5 Immunity to conducted RF disturbances - test level 10 V (0.15...80 MHz) conform- ing to EN/IEC 61000-4-6 Environment Marking CE Product certifications EAC cULus Standards UL 61010-1 EN/IEC 61326-2-3 Ambient air temperature for operation -4...176 F (-20...80 C) Ambient air temperature for storage -40...176 F (-40...80 C) IP degree of protection IP65 conforming to EN/IEC 60529 IP67 conforming to EN/IEC 60529 Vibration resistance 20 gn (f = 10...2000 Hz) conforming to EN/IEC 60068-2-6 Shock resistance 50 gn conforming to EN/IEC 60068-2-27 Ordering and shipping details Category 21551 - XMLE,XMLF,XMLG PRESSURE SENSORS Discount Schedule DS2 GTIN 00785901224013 Nbr. of units in pkg. 1 Package weight(Lbs) 0.47000000000000003 Returnability N Country of origin CH 2