XMLR010G1P25 Schneider

Product datasheet XMLR010G1P25 Characteristics Pressure sensors XMLR 10bar - G 1/4 - 24VDC - 4..20 mA - PNP - M12 Main Range of product OsiSense XM Product or component type Electronic pressure sensors Pressure sensor type Pressure transmitter Pressure switch type of operation Pressure transmitter with 1 switching output Device short name XMLR Pressure sensor size 10 bar 1 MPa 145 psi Maximum permissible accidental 580 psi pressure 4 MPa 40 bar Destruction pressure 40 bar 4 MPa 580 psi Controlled fluid Fresh water (0...80 C) Air (-20...80 C) Hydraulic oil (-20...80 C) Refrigeration fluid (-20...80 C) Fluid connection type G 1/4 (female) conforming to DIN 3852-Y Us rated supply voltage 24 V DC SELV, voltage limits: 17...33 V Complementary Current consumption <= 50 mA Electrical connection 4 pins M12 male connector Analogue output function 4...20 mA Type of output signal Analogue + discrete Analogue output function 4...20 mA Discrete output type Solid state PNP, NO/NC programmable Maximum switching current 250 mA Voltage drop <= 2 V Mar 09, 2017 1 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applicationsAdjustable range of switching point on 11.6...145 psi rising pressure 0.08...1 MPa 0.8...10 bar Adjustable range of switching point on 7.25...141 psi falling pressure 0.05...0.97 MPa 0.5...9.7 bar Minimum differential travel 30 kPa 4.35 psi 0.3 bar Materials in contact with fluid Ceramic 316L stainless steel Fluorocarbon FKM (Viton) Front material Polyester Housing material Polyacrylamide 316L stainless steel Operating position Any position, but disposals can falsified the measurement in case of upside down mounting Protection type Reverse polarity Overload protection Short-circuit protection Overvoltage protection Response time on output <= 10 ms for analog output <= 5 ms for discrete output Time delay range 0...50 s in steps of 1 second Display type 4 digits 7 segments Local signalling 1 LED yellow for light ON when switch is actuated Display response time type Fast 50 ms Normal 200 ms Slow 600 ms Delay first up <= 300 ms Accuracy <= 1 % of the measuring range Linearity error <= 0.5 % of the measuring range Hysteresis <= 0.2 % of the measuring range Measurement accuracy <= 0.6 % of the measuring range Repeat accuracy <= 0.2 % of the measuring range Drift of the sensitivity +/- 0.03 % of measuring range/C Drift of the zero point +/- 0.1 % of measuring range/C Display accuracy <= 1 % of the measuring range Mechanical durability >= 10000000 cycles Depth 42 mm Height 93 mm Width 41 mm Product weight 0.19 kg Uimp rated impulse withstand voltage 0.5 kV DC Electromagnetic compatibility Electrostatic discharge immunity test - test level 8 kV air, 4 kV contact conforming to EN/IEC 61000-4-2 Susceptibility to electromagnetic fields - test level 10 V/m (80...2000 MHz) conforming to EN/IEC 61000-4-3 Electrical fast transient/burst immunity test - test level 2 kV conforming to EN/IEC 61000-4-4 Surge immunity test - test level 1 kV conforming to EN/IEC 61000-4-5 Immunity to conducted RF disturbances - test level 10 V (0.15...80 MHz) conforming to EN/IEC 61000-4-6 Environment Marking CE Product certifications EAC cULus Standards UL 61010-1 EN/IEC 61326-2-3 Ambient air temperature for operation -20...80 C Ambient air temperature for storage -40...80 C 2