XX930A3A2M12 Schneider

Product data sheet XX930A3A2M12 Characteristics ultrasonic sensor cylindrical M30 - Sn 8 m - M12 connector Product availability: Stock - Normally stocked in distribution facility Main Range of product OsiSense XX Sensor type Ultrasonic sensor Series name General purpose Sensor name XX9 Sensor design Cylindrical M30 Detection system Diffuse Sn nominal sensing 26.25 ft (8 m) adjustable with teach push-button distance Material Plastic Type of output signal Analogue Wiring technique 4-wire Analogue output func- 4...20 mA tion Us rated supply volt- 15...24 V DC with reverse polarity protection age Electrical connection Male connector M12 4 pins Sd sensing range 0.98...26.25 ft (0.3...8 m) Beam angle 16 IP degree of protection IP67 conforming to IEC 60529 Complementary Enclosure material ULTEM Front material Epoxy Thread type M30 x 1.5 Supply voltage limits 14...28 V DC Function available Without synchronisation mode Sa assured operating distance 0.3...8 m (teach mode) Blind zone 0...11.81 in (0...300 mm) Transmission frequency 75 kHz Repeat accuracy 2.54 % Deviation angle from 90 of object to be detected -5...5 Minimum size of detected object Cylinder diameter 50.68 mm at 4.732 m Status LED 1 LED (dual colour) setting-up assistance 1 LED (green) supply on 1 LED (yellow) output state Current consumption 60 mA Maximum switching capacity 10...500 Ohm overload and short-circuit protection Setting-up Slope selection using teach button Delay first up <= 1200 ms Delay response <= 250 ms Delay recovery <= 250 ms Marking CE Threaded length 2.53 in (64.3 mm) Height 1.73 in (44 mm) Width 1.73 in (44 mm) Depth 4.65 in (118 mm) Product weight 0.25 lb(US) (0.115 kg) Aug 10, 2019 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Environment Standards IEC 60947-5-2 Product certifications UL CCSAus Ambient air temperature for operation -4...140 F (-20...60 C) Ambient air temperature for storage -40...176 F (-40...80 C) Vibration resistance +/-1 mm conforming to IEC 60068-2-6 10...55 Hz Shock resistance 30 gn in all 3 axes 11 ms conforming to IEC 60068-2-27 Resistance to electrostatic discharge 8 kV level 4 conforming to IEC 61000-4-2 Resistance to electromagnetic fields 9.14 V/yd (10 V/m) level 3 conforming to IEC 61000-4-3 Resistance to fast transients 1 kV level 3 conforming to IEC 61000-4-4 Ordering and shipping details Category 22490 - SENSORS-ULTRASONIC (XX5,6) Discount Schedule DS2 GTIN 00785901633327 Nbr. of units in pkg. 1 Package weight(Lbs) 0.41000000000000003 Returnability Y Country of origin US Offer Sustainability RoHS (date code: YYWW) Compliant - since 1140 - Schneider Electric declaration of conformity Schnei- der Electric declaration of conformity REACh Reference contains SVHC above the threshold - Go to CaP for more details- Go to CaP for more details Product end of life instructions Available California proposition 65 WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1 Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and - - - - - - - Substance 2 Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. - - - - - - - More information For more information go to www.p65warnings.ca.gov Contractual warranty Warranty period 18 months 2