ZBRRA Schneider

Product data sheet ZBRRA Characteristics Programmable receiver - 2 relays - 24..240 V AC/DC - 2 pusbuttons - 6 LEDs Product availability: Stock - Normally stocked in distribution facility Main Range of product Harmony Product or component Programmable receiver type Device short name ZBRRA Product specific applica- Interface to actuators tion Function of module Monostable Bi-stable Stop/start Reset time 2 ms (time delay) Transmission frequency 2405 MHz Emission class 5M00G7W Antenna type Omnidirectional Complementary Nominal output current 0.3 Aat 48 V DCfor EN/IEC 60947-5-1 3 Aat 24 V DCfor UL 508 1.5 Aat 240 V ACfor EN/IEC 60947-5-1 3 Aat 120 V ACfor EN/IEC 60947-5-1 3 Aat 240 V ACfor UL 508 3 Aat 24 V DCfor CSA C22.2 No 14 3 Aat 240 V ACfor CSA C22.2 No 14 Output type 2 relays Output contacts 2 C/O Input output isolation Galvanic isolation Time delay range 0.5 s (tolerance: - 15...15 %) Switching capacity in VA 1250 VA Maximum switching current 5 mA Maximum switching voltage 250 V AC/DC Us rated supply voltage 24...240 V AC/DC 50/60 Hz - 10...10 % Communication port protocol Zigbee (green power) at 2.4 GHz conforming to IEEE 802.15.4 Maximum sensing distance 328.08 ft (100 m) (in free field) 82.02 ft (25 m) (transmitter in a plastic box type XAL D and receiver in a metal enclosure) 131.23 ft (40 m) (transmitter in box type XAL D, receiver in metal enclosure and use relay-antenna) Response time < 30 ms (after transmitter clicks) Channels utilisation <= 32 per receiver Utilisation category AC-15 : B300 conforming to EN/IEC 60947-5-1 DC-12 conforming to EN/IEC 60947-5-1 Power consumption in W <= 4 W Breaking capacity 15 W Breaking capacity 750 VA Control circuit frequency 50...60 Hz +/- 10 % Short-circuit protection 0.4 A fuse fast blow Operating position Any position without derating Aug 10, 2019 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Electrical connection 1 conductor cable 0...0 in (0.14...2.5 mm) - AWG 26...AWG 14 - solid - without cable end conforming to IEC 60947-1 2 conductors cable 0...0 in (0.14...1.5 mm) - AWG 26...AWG 16 - solid - without cable end conforming to IEC 60947-1 1 conductor cable 0...0.01 in (0.14...4 mm) - AWG 26...AWG 12 - flexible - with cable end conforming to IEC 60947-1 2 conductors cable 0...0 in (0.14...1.5 mm) - AWG 26...AWG 16 - flexible - with cable end conforming to IEC 60947-1 Tightening torque 4.42...8.85 lbf.in (0.5...1 N.m) conforming to EN/IEC 60947-1 Housing material Self-extinguishing plastic Status LED 1 LED, color: green power ON 2 LEDs, color: green relay ON 2 LEDs, color: green function mode 1 LED, color: green and yellow reception signal Rated short-duration power frequency withstand volt- 1.5 kV 50 Hz conforming to EN/IEC 60947-5-1 age Uimp rated impulse withstand voltage 4 kV Surge withstand 1 kV (differential mode) conforming to IEC 61000-4-5 2 kV (common mode) conforming to IEC 61000-4-5 Max power consumption in W 1 mW Number of channels 1 Modulation technique O-QPSK Bandwidth 5 MHz Antenna gain 0 dBi Width 1.42 in (36 mm) Height 4.25 in (108 mm) Depth 2.95 in (75 mm) Product weight 0.29 lb(US) (0.13 kg) Environment Standards EN/IEC 60947-1 EN/IEC 60947-5-1 UL 508 CSA C22.2 No 14 Radio agreement RSS SRRC ICASA ANATEL ARIB T66 FCC Product certifications CCC CSA C-Tick GOST UL Marking CE Ambient air temperature for storage -40...158 F (-40...70 C) Relative humidity 90 % at -4...131 F (-20...55 C) without condensation conforming to ETSI EN 300 440-1 Vibration resistance +/- 7.5 mm (f = 5...14 Hz) conforming to IEC 60068-2-6 2 gn (f = 8...150 Hz) conforming to IEC 60068-2-6 Shock resistance 10 gn (duration = 16 ms) 6000 shocks conforming to IEC 60068-2-27 IP degree of protection IP20 on casing conforming to IEC 60529 IP20 on terminals Pollution degree 2 conforming to IEC 60664-1 Overvoltage category II conforming to IEC 60664-1 Insulation resistance > 500 MOhmat 500 V DC conforming to NF C 20-030 Ui rated insulation voltage 250 V conforming to IEC 60664-1 2