0040 AC Inlet with 5 x 20mm Fuseholder Power entry module with 1-pole or 2-pole fuseholder For cold connections 70 C, Protection Class I or II Screw mount from front Single or double pole shocksafe fuseholder according to IEC 65/VDE 0860 for 5 x 20mm fuses Note: Not recommended for Quick-connect terminals .187 x .032 (4.8 x 0.8mm) new designs. Refer to KEA 0.5 Nm torque required for M3 screws (pg. 36), GSF (pg. 13/14) or Max. power dissipation 2.4 watts (2-pole fusing) according to IEC 127-6. 6220 (pg. 35) For additional values P in function of T , see page 5 v amb For materials, options and accessories please see page 30 Standards: UL 498 CSA For inlet with piggy-back fuse clips see GSF, page 13-14 C22.2/182.3 DIN/VDE 0625 SEMKO 9320 IEC 320/C14/C18 EN 60320 UL recognition 10A/250V File E93617 CSA certification 10A/250V File LR38456 VDE approval 6A/250V File 19397 File SEMKO approval 10A/250V numbers SEV approval 10A/250V on request page 102. Series 0040 CIlass I Cglass I Ceolor/Fusin Terminal Typ 05040.5000.2 0040.501 black/2-pole solder 80843-2.SP.FL.4/3.608)842-2.SP.FL.4/3.6 .138 x .032 (3.5 x 0.8mm 0040.5001.2 grey/2-pole quick-connect 8843-2.SP.FL.4/3.64 .187 x .032 (4.8 x 0.8mm) 0040.5012 black/1-pole quick-connect 8843-2.SP.U.FL.4/3.60 .250 x .032 (6.3 x 0.8mm) 1 1 8843 AC Inlet Interchangeable Fuseholders for /4 x 1 /4 or 5 x 20mm Fuses Power entry module with 1-pole or 2-pole fuseholder For cold connections 70 C, Protection Class I. Screw mount from front or rear, or snap-in mount from front (0.8-3.0mm panel thickness) Single or double pole shocksafe fuseholder according to IEC 65/VDE 1 1 0860 for /4 x 1 /4 or 5 x 20mm fuses Quick-connect terminals .187 x .032 (4.8 x 0.8mm) or solder .138 x .032 (3.0 x 0.8mm). 0.5 Nm torque required for M3 screws for screw-on type Max. power dissipation 5.5 watts (2 pole fusing, unfiltered) according to IEC 127-6. For additional values P in function of T , see page 6 Standards: UL 498 CSA C22.2/ v amb 182.3 DIN/VDE 0625 SEMKO For materials, options and accessories please see page 30 9320 IEC 320/C14 EN 60320. For 8843 with line filter, please see 8843 on page 59 U.S. Patented. For inlet with piggy-back fuse clips see GSF, page 13-14 UL recognition 10A/250V File E96317 CSA certification 10A/250V File LR38456 VDE approval 10A/250V File 3157, expert report SEMKO approval 10A/250V File numbers SEV approval 10A/250V on request Order Numbers (type) Note: Casing and fuseholders must be ordered separately. To order fuses, please see page 102. Casing 8843 Fuseholder inserts* (2 inserts 1g-pole fusing 2-pole fusin Tgerminals M)ountin must be ordered for 2-pole fusing 8843.0351 (8843-351.60) 8843.0361 (8843-361.60)Snolder .138 X .032 (3.0 x 0.8mm) Screw-o 8843.0901 1/4 x 1 1/4 8843.0353 (8843-353.60) 8843.0363 (8843-363.60)Qnuick-connect .187 x .032 (4.8 x 0.8mm) Screw-o 8)843-901.60 (6.3x32mm 8843.0451 (8843-451.60) 8843.0461 (8843-461.60)Ssolder .138 X .032 (3.0 x 0.8mm) Snap-in,0.8-3.0mm panel thicknes 8843.0902 for 5 x 20mm 8843.0453 (8843-453.60) 8843.0463 (8843-463.60)Qsuick-connect .187 x .032 (4.8 x 0.8mm) Snap-in,0.8-3.0mm panel thicknes 8843-902.60 Schurter, Inc. Phone 707-778-6311 Fax 707-778-6401 E-mail info schurterinc.com Website X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Fuse Holder category: Click to view products by Schurter manufacturer: Other Similar products are found below : 570-290-741P40 570-290-751P40 0031.1351.01 020417G 020418E 80910030 8601.2020 9-3557-GP REV A 15600-08-10 BK1-HTC-45M BK/FHN19G BK/HJM-HH BK/HKP-CCHH BK/HKP-E-CC BK/HKP-E-HH BK/HKP-EH-HH BK/HKP-U-HH BK/HTJ-LES-FUSE HMG-241 2086-1 2193 RTMF-SC 2602 2650 FHN31G1 G4PB8 2660 2799 CQ-209V 345621A 3794 4202 4408 4413 4423 4482 4532 4537 TSD1404-12 BK/FHN31G1 BK/HKP-H-CC BK/HKP-JQ-BB BK/HKP-JQW-BB BK/HKP-N-HH BK/HKP-S-CC BK/HKP-W- BBHH BP/HHS BPHHU 55900008011 C1933