WIRELESS-TAG BLE MODULE PRODUCT SPECIFICAITON nRF51-01/02 WIRELESS-TAG BLE MODULE SPECIFICATIONS nRF51-01/02/DK WIRELESS-TAG TECHNOLOGY CO., LIMITED www.wireless-tag.com support wireless-tag.com WIRELESS-TAG BLE MODULE PRODUCT SPECIFICAITON nRF51-01/02 Bluetooth Low Energy (BLE) module of nRF51-01/02 is the next Quadrature Decoder (QDEC) generation BLE module released by SEMITRION electronics. The AES HW encryption modules use nRF51822 from NORDIC as the controller chips. With Real Timer Counter (RTC) its small form factor, low power, high economic Bluetooth radio, 16 MHz crystal nRF51-01/02 can easily be added in your system and help to Balun promote the design process. AES HW encryption nRF51822 is an ultra-low power 2.4 GHz wireless System on Package variants Chip (SoC) integrating the nRF51 series 2.4 GHz transceiver, a 32 nRF51-01, 16 x16 mm bit ARM Cortex-M0 CPU, flash memory, and analog and digital nRF51-02, 16 x 28 mm, with PCB antenna. peripherals. nRF51822 can support Bluetooth low energy and a range of proprietary 2.4 GHz protocols, such as Gazell from Applications Nordic Semiconductor. Computer peripherals and I/O devices Fully qualified Bluetooth low energy stacks for nRF51822 Mouse are implemented in the S100 series of SoftDevices. The S100 Keyboard series of SoftDevices are available for free and can be Multi-touch track pad downloaded and installed on nRF51822 independent of your own Interactive entertainment devices application code. Remote control 3D Glasses Key Features Gaming controller 2.4 GHz transceiver Personal Area Networks -93 dBm sensitivity in Bluetooth low energy mode Health/fitness sensor and monitor devices 250 kbps, 1 Mbps, 2 Mbps supported data rates Medical devices TX Power -20 to +4 dBm in 4 dB steps Key-fobs + wrist watch TX Power -30 dBm Whisper mode Remote control toys 13 mA peak RX, 10.5 mA peak TX (0 dBm) RSSI (1 dB resolution) ARM Cortex-M0 32 bit processor 275 A/MHz running from flash memory 150 A/MHz running from RAM Serial Wire Debug (SWD) Memory 256 kB or128 kB embedded flash program memory 16 kB RAM Flexible Power Management Supply voltage range 1.8 V to 3.6 V 2.5 s wake-up using 16 MHz RCOSC 0.4 A 3V OFF mode 0.5 A 3V in OFF mode + 1 region RAM retention 2.3 A 3V ON mode, all blocks IDLE 8/9/10 bit ADC - 8 configurable channels 31 General Purpose I/O Pins One 32 bit and two 16 bit timers with counter mode SPI Master UART (CTS/RTS) Two-wire Master (I2C compatible) WIRELESS-TAG TECHNOLOGY CO., LIMITED www.wireless-tag.com support wireless-tag.com