LTPD345B-576-E Seiko

69 mm 83.1 mm LTPD/CAPD Series Low Voltage Printer Mechanisms Small LTPD/CAPD series mechanisms free up critical design real estate. The new mechanisms provide a smaller overall form factor, innovative angled paper guide requiring less depth, and a smaller pitch flexible print circuit (FPC) cable. Fast LTPD/CAPD series mechanisms are fast, rated for up to 100 mm/second print speeds. This gives mobile devices a much needed performance boost. Reliable LTPD/CAPD series mechanisms offer a minimum of 50 km of total printing and 100 million pulses. CAPD models offer a new built-in auto-cutter design, improving cutter reliability. The result: reliable Designing mobile devices is increasingly media output, every time. challenging. Customers expect each new Flexible product generation to be smaller and LTPD/CAPD series mechanisms offer a wide array of form factor faster, with long battery life. To be choices to provide versatility and flexibility for smoother integration. competitive, device manufacturers must Options include EZ-OP clamshell-style and auto-loading models, reduce product size and increase speed. ASIC and interface board solutions, and both horizontal and vertical Time to market is crucial and reliability is mechanical orientation designs. non-negotiable. 2 and 3 print width models New low voltage LTPD/CAPD series High speed printing (up to 100 mm/second) printer mechanisms tackle these challenges with dramatic advances in Choice of horizontal and vertical orientations design flexibility, reliability, and printing EZ-OP clamshell and auto-loading paper performance. replacement options Platen latch for better shock absorption Built-in auto-cutter (CAPD models) 30 mm 15 mm 35.4 mm 26.9 mm 2 LTPD model and 2 CAPD model. Product Specifications Model LTPD245 LTPD345 CAPD245 CAPD345 Thermal line dot printing Method Number of dots/line 384 576 384 576 8 Resolution(dots/mm) +0-1 +0-1 +0-1 +0-1 Paper width (mm) 58 80 58 80 Printing 48 72 48 72 Printing width (mm) Speed (max mm/sec) 100 80 100 80 Curved Paper path By thermistor Head temperature Platen position detection By mechanical switch Sensors By photo interrupter Out of paper detection Cutter home position detection - - By photo interrupter Power Operating Voltage (Vdd) 2.7 to 3.6/4.75 to 5.25 supply (V) - Operating Voltage (Vp) - 4.75 to 9.5 6.5 to 9.5 3.66 (9.5V/64dots) 3.60 (9.5V/64dots) 3.66 (9.5V/64dots) 3.60 (9.5V/64dots) Head Peak 5.40 (9.5V/96dots) 5.49 (9.5V/96dots) 5.49 (9.5V/96dots) 5.40 (9.5V/96dots) current (A) Motor 0.6 0.6 0.6 0.6 - Cutter motor - 0.7 0.7 Service life Pulse activation (pulses) 100 million 100 million 50 * Abrasion resistance (km)* 50 * Operating temperature (C) -10 to 50 -10 to 50 Dimensions 83.1 x 35.4 x 26.9 ** Horizontal 69.0 x 30.0 x 15.0 ** 91.0 x 30.0 x 15.0 ** 105.1x35.4x27.2*** (W x D x H mm)* 69.0 x 15.0 x 30.0 ** 91.0 x 15.0 x 30.0 ** Vertical g Mass( ) Approx. 58 Approx. 125 Approx. 148 Approx. 40 - - Slide cutting Method Paper thickness (um) - 54 to 78* - 54 to 90* Cutting type Full cut and partial cut (1.50.5mm tab left at the center) - - Auto-cutter Operating time (sec/cycle) - - Approx 1.0 Minimum paper cutting length (mm) - - 10 Cutting frequency - (max cuts/min) - 30 - Life span Paper cutting (cuts) - 500,000 * *Use recommended thermal paper. **Excluding convex section. ***Excluding mounting part. Specifications are subject to change without notice. IF Board Specifications Optional Cables Accessory Product IFD501-01UK-E IFD501-01SK-E CPU PTD50P01-E Power Cable DC-04100A-E LTPD245, LTPD345 Series Switch Cable OC-D1430A-E Corresponding Model CAPD245, CAPD345 Series Serial Cable OC-D0730A-E Operating Voltage (V) Vp:4.75 to 9.5 USB Cable IFC-U01-1-E 16 dots character: 16 x 8, 16 x 16 Character matrix (H x W dots) 24 dots character: 24 x 12, 24 x 24 Optional font Yes Yes Downloaded character Yes Yes User-defined character Yes Yes Character Extend graphics character set Yes Yes Type Katakana character set Yes Yes Codepage 1252 Yes Yes JIS 1&2 level kanji Yes Yes Serial USB(2.0) Communication interface (RS-232C) Dimensions (W x D x H mm) 69.0 x 50.0 x 14.0 ASIC Specifications: PTD50P01-E Corresponding model LTPD245, LTPD345 series CAPD245, CAPD345 series Package form 120pin QFP Operating voltage (V) Vp:4.75 to 9.5,Vcc:3.0 to 3.6 Operating frequency (MHz) 12MHz0.01% Configuration C-MOS LSI Communication interface Parallel, Serial, USB Character type Extended graphics character set Other characters available With CGs or external memory Character matrix 16 dot character: 16 x 8, 16 x 16 (H x W dots) 24 dot character: 24 x 12, 24 x 24 Dimensions 16.0 x 16.0 x 1.7 (W x D x H mm) Seiko Instruments USA Inc. Thermal Printer Division 2990 Lomita Blvd., Torrance, CA 90505 Telephone (310) 517-7778 Facsimile (310) 517-8154 Email: printerinfo seikoinstruments.com www.siiprinters.com LTPD/CAPD-711