502AP-2 Semitec

Very high accuracy thermistor AP Thermistor The AP series thermistor features an even higher accuracy than our high accuracy AT thermistors and is suitable for many applications. Features: Very high accuracy with tight R and B tolerances ( 0.5%) 25 25/85 High accuracy over a wide temperature range: 0.5% resistance tolerance from 60 C to + 80 C Product number explanation Dimensions 3.0 to 4.5 Marking AP2 2.540.25 B value class 8.51 171.5 Very high accuracy thermistor Rated zero-power resistance at 25 Resin 0.25 thickness tin plated 42 alloy E.g.:103 = 10 x 10 Unit: mm Applications Mobile devices, battery chargers, battery packs, fan motors, automotive, office automation, home electronics, security, thermometers, measuring instruments , etc. Specifications Dissipation factor Thermal time Rated power Operating temperature 1 2 Product number R R tolerance B value 3 25 25 (mw / ) constant (s) at 25 (mW) range ( ) 202AP-2 2.00 k 3976 K 0.5 232AP-2 2.252 k 3976 K 0.5 502AP-2 5.00 k 3976 K 0.5 103AP-2 3435 K 0.5 10.0 k 103AP-2-A 0.5 3976 K 0.5 approx. 1.2 approx. 15 6 - 60 to 150 203AP-2 20.0 k 3976 K 0.5 503AP-2 50.0 k 4220 K 0.5 104AP-2 100 k 4261 K 0.5 204AP-2 200 k 4470 K 0.5 1 2 : Rated zero-power resistance at 25 : B value calculated from rated zero-power resistance at 25 and 85 3 : Time required to reach 63.2% of temperature difference. Measured with sensor suspended in mid-air. Reliability data Caution When bending the lead wires using for example a radio Item Test conditions Criteria plier make sure to have a minimum distance from the Resistance to soldering 10 s at 260 or R, B 0.5% and heat 3.5 s at 340 visual inspection sensor head of 3 mm. 2 s at 245 Solderability More than 90% soldered Do not apply a mechanical load of more than 2 N in the Flux material: Rosin 25%, ethyl alcohol 75% way depicted in Fig. 1 below. Tensile strength A load of 2 N is applied to the wire terminations in (lead wire) vertical direction for 10 s. (See Fig. 1) The lead wire is bent to an angle of 90 and then R, B 0.5% and Termination bending back into the original position. visual inspection Three times natural fall to a maple board from 1 m Free fall height. 2N Fig. 1 Voltage proof 1000 V AC for one minute Less than 1 mA Insulation resistance 500 V DC Over 100 M When soldering make sure to have a minimum Dry heat 1000 hours at 150 distance of 5 mm, use a soldering iron with 50 W Damp heat 1000 hours at 40 and 90% humidity and solder for maximum seven seconds at 340C. If (under electrical load) Electrical load: 1 mA DC you plan to cut the lead wire shorter than the above 100 cycles as below: R, B 0.5% minimum distance please contact us. 1. - 60 for 30 minutes Temperature cycle 2. Room temperature for 3 minutes (thermal shock) 3. 150 for 30 minutes 4. Room temperature for 3 minutes 10 1.8 to 2.6 3.8 max. 0.35 Resistance / temperature characteristics Product number Temperature () 202AP-2 232AP-2 502AP-2 103AP-2 103AP-2-A 203AP-2 503AP-2 104AP-2 204AP-2 - 60 207.1 233.2 560.2 600.6 1202 2497 7940 15510 - 50 102.6 115.5 273.7 326.9 583.4 1211 3729 7339 17830 - 40 53.94 60.73 142.2 187.4 301.2 624.9 1868 3702 8750 - 30 29.69 33.44 77.18 110.9 162.3 335.8 975.9 1943 4461 - 20 17.07 19.22 43.61 67.64 90.85 187.2 528.7 1056 2359 - 10 10.16 11.44 25.55 42.39 52.76 108.1 296.7 593.7 1291 0 6.261 7.050 15.46 27.25 31.64 64.39 171.9 344.5 730.6 10 3.922 4.417 9.648 17.95 19.56 39.53 102.8 205.9 426.2 20 2.491 2.804 6.186 12.09 12.43 24.94 63.14 126.4 255.6 25 2.000 2.252 5.000 10.00 10.00 20.00 50.00 100.0 200.0 30 1.615 1.818 4.066 8.314 8.096 16.14 39.83 79.59 157.4 40 1.070 1.205 2.725 5.829 5.394 10.69 25.75 51.32 99.36 50 0.7237 0.8149 1.846 4.162 3.671 7.237 17.01 33.79 64.10 60 0.4994 0.5624 1.270 3.022 2.546 4.998 11.48 22.72 42.26 70 0.3513 0.3956 0.8884 2.229 1.783 3.516 7.905 15.57 28.42 80 0.2515 0.2832 0.6314 1.669 1.265 2.516 5.539 10.86 19.47 85 0.2142 0.2412 0.5355 1.451 1.071 2.142 4.669 9.124 16.23 90 0.1831 0.2062 0.4558 1.266 0.9098 1.830 3.949 7.697 13.57 100 0.1354 0.1525 0.3339 0.9737 0.6635 1.352 2.859 5.540 9.616 110 0.1017 0.1145 0.2480 0.7576 0.4903 1.012 2.098 4.040 6.905 120 0.07730 0.08710 0.1867 0.5961 0.3670 0.7675 1.562 2.989 5.033 130 0.05960 0.06710 0.1422 0.4741 0.2780 0.5889 1.179 2.240 3.719 140 0.04650 0.05230 0.1097 0.3808 0.2130 0.4570 0.8998 1.698 2.782 150 0.03660 0.04130 0.08550 0.3087 0.1650 0.3584 0.6946 1.301 2.105 B 3976 K 3976 K 3976 K 3435 K 3976 K 3976 K 4220 K 4261 K 4470 K 25/85 Unit: k Measurement accuracy comparison graph 103AP-2 (Operating temperature range: - 60 to 150 ) 103AT-2 (Operating temperature range: - 50 to 110 ) Temperature 11 Measurement deviation (accuracy)