RClamp0584J Ultra Low Capacitance TVS Array PROTECTION PRODUCTS PRELIMINARY PROTECTION PRODUCTS - RailClamp Features Description RailClamp TVS arrays are ultra low capacitance ESD ESD protection for high-speed data lines to protection devices designed to protect high speed data IEC 61000-4-2 (ESD) 18kV (air), 12kV (contact) interfaces. This series has been specifically designed to IEC 61000-4-5 (Lightning) 5A (8/20 s) protect sensitive components which are connected to IEC 61000-4-4 (EFT) 40A (5/50ns) high-speed data and transmission lines from overvolt- Package design optimized for high speed lines age caused by ESD (electrostatic discharge), CDE Flow-Through design (Cable Discharge Events), and EFT (electrical fast Protects four I/O lines transients). Low capacitance: 0.25pF typical (I/O to I/O) The RClamp 0584J has a typical capacitance of only Low clamping voltage 0.25pF between I/O pins. This allows it to be used on Low operating voltage: 5V circuits operating in excess of 3GHz without signal Solid-state silicon-avalanche technology attenuation. It may be used to meet the ESD immunity requirements of IEC 61000-4-2. Each device is de- Mechanical Characteristics signed to protect four lines (two differential pairs). SLP2710P8 10-pin package (2.7 x 1.0 x 0.5mm) The RClamp0584J is in a 10-pin SLP2710P8 package. Pb-Free, Halogen Free, RoHS/WEEE Compliant It measures 2.7 x 1.0 with a nominal height of 0.5mm. Lead Pitch: 0.5mm The leads are spaced at a pitch of 0.5mm and are fin- Lead finish: NiPdAu ished with lead-free NiPdAu. It is designed for easy PCB Marking: Marking Code layout by allowing the traces to run straight through the Packaging: Tape and Reel device. The combination of small size, low capacitance, and high level of ESD protection makes this device a Applications flexible solution for applications such as HDMI, TM HDMI 1.3 and HDMI 1.4 DisplayPort , MDDI, and eSATA interfaces. USB 3.0 Digital Visual Interface (DVI) TM DisplayPort Interface LVDS Interfaces PCI Express eSATA Interfaces Dimensions Circuit Diagram 2.70 0.40 1 2 1.00 Pin 1 Pin 2 Pin 4 Pin 5 0.60 0.20 0.50 0.50 3, 8 Nominal Dimensions in mm 4-Line Protection www.semtech.com Revision 5/3/2011 1RClamp0584J PROTECTION PRODUCTS PRELIMINARY Absolute Maximum Rating Rlating Seymbo Vsalu Unit PPeak Pulse Power (tp = 8/20s) 7s5 Watt pk PIeak Pulse Current (tp = 8/20s) 5A PP ESD per IEC 61000-4-2 (Air) V +/- 18 kV ESD ESD per IEC 61000-4-2 (Contact) +/- 12 OTperating Temperature -C55 to +125 J STtorage Temperature -C55 to +150 STG o Electrical Characteristics (T=25 C) Plarameter SsymboCmondition MlinimuTmypicaMsaximu Unit RVeverse Stand-Off VoltageA5ny I/O to GND V RWM RVeverse Breakdown Voltage I = 1mA, 68.5 1V1 BR t Any I/O to GND RIeverse Leakage Current V = 5.0V, 00.005 0A.10 R RWM Any I/O to GND CVlamping Voltage I = 1A, tp = 8/20s 1V2 C PP Any I/O to GND CVlamping Voltage I = 5A, tp = 8/20s 1V5 C PP Any I/O to GND JCunction Capacitance V = 0V, f = 1MHz, 00.45 0F.6 p j R Any I/O to GND V = 0V, f = 1MHz, 04.25 0F. p R Between I/O pins www.semtech.com 2011 Semtech Corp. 2