Clamp2411ZA Ultra Small Clamp 1-Line, 24V ESD Protection PROTECTION PRODUCTS Description Features Transient protection for data and power lines to Clamp TVS diodes are designed to protect sensitive IEC 61000-4-2 (ESD) electronics from damage or latch-up due to ESD. It IEC 61000-4-4 (EFT) features large cross-sectional area junctions for Cable Discharge Event (CDE) conducting high transient currents. This device offers Ultra-small package desirable characteristics for board level protection Protects one data or DC Power line Low clamping voltage including fast response time, low operating and Working voltage: 24V clamping voltage, and no device degradation. Low leakage current Solid-state silicon-avalanche technology Clamp2411ZA is in a 2-pin SLP0603P2X3F package. It measures 0.6 x 0.3 mm with a nominal height of only Mechanical Characteristics 0.25mm. Leads are finished with lead-free NiAu. Each device will protect one line operating at 24 volts. It gives SLP0603P2X3F package the designer the flexibility to protect single lines Pb-Free, Halogen Free, RoHS/WEEE compliant in applications where arrays are not practical. The Nominal Dimensions: 0.6 x 0.3 x 0.25 mm combination of small size and high ESD surge capability Lead Finish: NiAu makes them ideal for use in portable applications such as Marking: Marking code Packaging: Tape and Reel cellular phones, tablets, and notebook computers. Applications Cellular Handsets & Accessories Notebook Computers Tablets Portable Instrumentation Chip-on-Glass Driver IC data line Peripherals 24V DC Power Rails Package Dimension Schematic & Pin Configuration 0.600 0.220 0.300 1 0.160 0.355 BSC 2 0.250 SLP0603P2X3F (Bottom View) Nominal Dimensions in mm Clamp2411ZA 1 of 7 www.semtech.com Final Datasheet Rev 3.1 Semtech Revision Date 1/24/2017 Proprietary & ConfidentialAbsolute Maximum Rating Rating Symbol Value Units Peak Pulse Power (tp = 8/20s) P 150 W PK Peak Pulse Current (tp = 8/20s) I 3 A PP (1) ESD per IEC 61000-4-2 (Air) 20 V kV (1) ESD ESD per IEC 61000-4-2 (Contact) 17 O Operating Temperature T -40 to +85 C J O Storage Temperature T -55 to +150 C STG O Electrical Characteristics (T=25 C unless otherwise specified) Parameter Symbol Conditions Min. Typ. Max. Units Reverse Stand-Off Voltage V Pin 1 to 2 or Pin 2 to Pin 1 24 V RWM Reverse Breakdown Voltage V I = 1mA, Pin 1 to 2 or Pin 2 to 1 27 32 36 V BR BR Reverse Leakage Current I V = 24V, Pin 1 to 2 or Pin 2 to Pin 1 0.05 0.100 A R RWM Clamping Voltage V I = 2A, tp = 8/20s 45 V C PP I= 4A, tlp = 0.2/100ns 36 2 ESD Clamping Voltage V V C I=16A, tlp = 0.2/100ns 48 2,3 Dynamic Resistance R tlp = 0.2/100ns 1 DYN Junction Capacitance C I/O to GND, V = 0V, f = 1MHz 9 15 pF J R Notes: 1) ESD gun return path connected to ESD ground plane. 2) Transmission Line Pulse Test (TLP) Settings: tp = 100ns, tr = 0.2ns, I and V averaging window: t1 = 70ns to t2 = 90ns. TLP TLP 3) Dynamic resistance calculated from I = 4A to I = 16A TLP TLP Clamp2411ZA 2 of 7 www.semtech.com Final Datasheet Rev 3.1 Semtech Revision Date 1/24/2017 Proprietary & Confidential