A53DP25D-10 Sensata

53DP Series Two-phase solid-state relay; Ratings from 25A to 50A @ 48-530 VAC SCR output for heavy industrial loads AC or DC control Zero-crossing (resistive loads) or random-fire (inductive loads) output LED input status indicator PRODUCT SELECTION Control Voltage 25A 50A 3-32 VDC D53DP25D D53DP50D 90-280 VAC A53DP25D A53DP50D AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description 25 A 50 A Operating Voltage (47-63Hz) [Vrms] 48-530 48-530 Transient Overvoltage [Vpk] 1200 1200 Maximum Off-State Leakage Current @ Rated Voltage [mArms] 10 10 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/sec] (2) 500 500 Maximum Load Current [Arms] (3) 25 50 Minimum Load Current [Arms] 0.05 0.05 Maximum Surge Current (16.6ms) [Apk] 250 625 Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.6 1.6 Thermal Resistance Junction to Case (Rjc) [C/W] 1.02 0.63 2 2 Maximum I t for Fusing (8.3 msec) [A sec] 260 1620 Minimum Power Factor (with Maximum Load) 0.5 0.5 ObsoleteINPUT SPECIFICATIONS (1) Description D53DPxxD A53DPxxD Control Voltage Range 3-32 VDC 90-280 VAC Minimum Turn-On Voltage 3.0 VDC 90 Vrms Minimum Turn-Off Voltage 1.0 VDC 10 Vrms Typical Input Current 10 mA @ 5 VDC 2.2 mA @ 120 Vrms, 4.4 mA @ 240 Vrms Nominal Input Impedance 450 Ohm 54.8 k Ohm Maximum Turn-On Time [msec] (4) 1/2 Cycle 10 Maximum Turn-Off Time [msec] 1/2 Cycle 40 GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance (@ 500 V DC) 10 Ohm Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -40 to 80C Ambient Storage Temperature Range -40 to 125 C Weight (typical) 10.3 oz (315g) Encapsulation Thermally conductive Epoxy Terminals Screws and Saddle Clamps Furnished, Unmounted Recommended Terminal Screw Torque Range: 6-32 Screws - 10 in lbs. 8-32 and 10-32 Screws -20 in. lbs. Screws dry without grase) GENERAL NOTES GENERAL NOTES 1) All parameters at 25C unless otherwise specified. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Heat sinking required, see page 3 for derating curves. 4) Turn-on time for Random turn-on versions is 0.02 msec (DC Control Models) Obsolete