AO241R Sensata

PCB Mount Datasheet AO Series Mini-SIP SSR Ratings to 1A 280 VAC SCR or Triac output DC control Zero-crossing (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION Control Voltage 1A 4-10 VDC AO241 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description AO241 Operating Voltage (47-63Hz) Vrms 24-280 Transient Overvoltage Vpk 600 Maximum Off-State Leakage Current Rated Voltage mArms 0.1 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (3) 500 Maximum Load Current Arms (3) 1.0 Minimum Load Current Arms 0.025 Maximum Surge Current (16.6ms) Apk 40 Maximum On-State Voltage Drop Rated Current Vpk 1.5 Minimum Power Factor (with Maximum Load) 0.5 INPUT SPECIFICATIONS (1) Description Parameters Control Voltage Range 4-10 VDC Must Turn On Voltage 4.0 VDC Must Turn Off Voltage 1.0 VDC Typical Input Current 5 VDC 15 mAdc Nominal Input Impedance 300 Ohm Maximum Turn-On Time msec 1/2 Cycle Maximum Turn-Off Time msec 1/2 Cycle Do not forget to visit us at: www.crydom.com Copyright 2016 Crydom Inc. Specifications subject to change without notice. ObsoletePCB Mount Datasheet GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz)(2) 2500 Vrms 9 Minimum Insulation Resistance ( 500 VDC)(2) 10 Ohm Maximum Capacitance, Input/Output 8.0 pF Ambient Operating Temperature Range -30 to 80C Ambient Storage Temperature Range -30 to 125C Weight (typical) 0.15 oz. (4.3g) Encapsulation Thermally Conductive Epoxy GENERAL NOTES 1) All parameters at 25C unless otherwise specified. 2) Dielectric and insulation resistence are measured between input and output 3) Off-State dv/dt test method per EIA/NARM standard RS-443 MECHANICAL SPECIFICATIONS DC CONTROL. PIN 1: AC LOAD PIN 2: AC LOAD PIN 3: +DC CONTROL PIN 4: -DC CONTROL THERMAL DERATE INFORMATION AGENCY APPROVALS UL E116950 CSA LR81689 Rev. 010511 Do not forget to visit us at: www.crydom.com Copyright 2016 Crydom Inc. Specifications subject to change without notice. Obsolete