CSW2410 Sensata

Panel Mount Datasheet CSW Series Ratings from 10 A to 90 A 24-280 VAC Direct bond copper substrate 3-32 VDC input range Direct power lead frame Low off-state leakage current (snubberless) Epoxy free design SCR output for heavy industrial loads EMC Compliant for reliable operation in harsh environments Replaces the CSD/CSE series relays For Generation 3 datasheet click here PRODUCT SELECTION Control Voltage 10 A 25 A 50 A 75 A 90 A 3-32 VDC CSW2410 CSW2425 CSW2450 CSW2475 CSW2490 AVAILABLE OPTIONS Termination Blank: Screw F: Quick Connect (1) (Up to 50 Amp. Single pair up to 25 Amp Double pair 50 Amp ) Input Status LED Thermal Pad K: Hex standoffs for Operating Voltage Blank: Not Included Blank: Not Included 24: 24-280 VAC PC Board mounting Series (2) G: Included H: Included CSW 24 10 K P G S H -10 Rated Load Current Overvoltage Protection Snubber Switching Type 10: 10 Amp Blank: Not Included Blank: Zero Voltage Turn-On Blank: Not Included 25: 25 Amp P: Included (3) S: Included -10: Instantaneous Turn-On (4) 50: 50 Amp 75: 75 Amp Required for valid part number 90: 90 Amp For options only and not required for valid part number Not all part number combinations are available. * Contact Crydom Technical support for information on the availability of a specific part number. (5) OUTPUT SPECIFICATIONS Description 10 A 25 A 50 A 75 A 90 A Operating Voltage (47-440Hz) Vrms (6) 24-280 24-280 24-280 24-280 24-280 Transient Overvoltage Vpk 600 600 600 600 600 Maximum Off-State Leakage Current Rated Voltage mArms (7) 1.0 1.0 1.0 1.0 1.0 Minimum Off-State dv/dt Maximum Rated Voltage V/sec 500 500 500 500 500 Maximum Load Current Arms (8) 10 25 50 75 90 Minimum Load Current mArms 150 150 150 150 150 Maximum 1 Cycle Surge Current (50/60) Apk 115/120 239/250 597/625 954/1000 1145/1200 Maximum On-State Voltage Drop Rated Current Vrms 1.15 1.15 1.15 1.15 1.15 Thermal Resistance Junction to Case (Rjc) C/W 1.03 0.8 0.45 0.3 0.27 Maximum I t for Fusing 50/60Hz (1/2 cycle) A sec 66/60 285/259 1770/1621 4555/4150 6560/5976 Minimum Power Factor (at Maximum Load) 0.5 0.5 0.5 0.5 0.5 (5) INPUT SPECIFICATIONS Description Parameters Control Voltage Range (9) 3-32 VDC Minimum Turn-On Voltage 3 VDC Must Turn-Off Voltage 1.0 VDC Maximum Reverse Voltage -32 VDC 10 mA 12 VDC Typical Input Current Active Current Limiter Nominal Input Impedance 1/2 Cycle Maximum Turn-On Time msec (10) 1/2 Cycle Maximum Turn-Off Time msec FDE-07-01 REV. A Do not forget to visit us at: www.crydom.com Copyright 2021 Crydom Inc. Specifications subject to change without notice.Panel Mount Datasheet (5) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohm Maximum Capacitance, Input/Output 10 pF Ambient Operating Temperature Range -40 to 80 C Ambient Storage Temperature Range -40 to 125 C Weight (typical) 2.6 oz (74.9 g) Housing Material UL94 V-0 Baseplate Material Aluminum Input Terminal Screw Torque Range (in-lb/Nm) 13-15/1.5-1.7 Load Terminal Screw Torque Range (in-lb/Nm) 18-20/2.0-2.2 SSR Mounting Screw Torque Range (in-lb/Nm) 18-20/2.0-2.2 Input/Load Terminal Screw Torque Range (in-lb/Nm) (2) w/K option 8-10 / 0.9-1.13 Input/Output Terminal Screw Thread Size 6-32 UNC / 8-32 UNC Humidity per IEC60068-2-78 93% non-condensing LED Status Indicator (Color) w/G option (green) 11,641,553 hours (1,328 years) MTBF (Mean Time Between Failures) at 40C ambient temperature (11) 7,210,376 hours (823 years) MTBF (Mean Time Between Failures) at 60C ambient temperature (11) WIRING DIAGRAM AC V Input Current vs Input Voltage Recommended Wire Sizes (12) Load Standard Regulated DC Input Wire Size Wire Pull-Out Terminals 25 (Solid / Stranded) Strength (lb) N 1 ( ) 2 ( ) 2 20 24 AWG (0.2 mm ) / 0.2 minimum 10 44.5 Input 2 2 x 12 AWG (3.3 mm ) / 3.3 maximum 90 400 15 2 1 OUTPUT 2 20 AWG (0.5 mm ) / 0.518 minimum 30 133 S OL I D S T A T E R EL A Y 10 2 Output 2 x 10 AWG (5.3 mm ) / 5.3 110 490 5 4 INPUT 3 2 2 x 8 AWG (8.4 mm ) / 8.4 maximum 90 400 0 0 5 10 15 20 25 30 DC Input Voltage 4 () 3 (+) EQUIVALENT CIRCUIT BLOCK DIAGRAM 4 1 -DC AC (13) Trigger (14) Circuit (15) +DC 3 2 AC Current Limiter Do not forget to visit us at: www.crydom.com Copyright 2021 Crydom Inc. Specifications subject to change without notice. Input Current (mA)