Panel Mount Datasheet DC60 Series Ratings from 3 A to 7 A 60 VDC AC and DC control Bi-polar transistor output Epoxy Free Design UL Approved, CE Compliant to EN60950-1 Improved SEMS screw and washer Redesigned housing with anti-rotation barriers For Generation 3 datasheet click here PRODUCT SELECTION Control Voltage 3 A 5 A 7 A 3.5-32 VDC DC60S3 DC60S5 DC60S7 90-280 VAC/VDC DC60SA3 DC60SA5 DC60SA7 AVAILABLE OPTIONS Termination Blank: Screws & clamps Control Voltage K: Installed standoffs with Output Type S: 3.5-32 VDC screws for PC Board Blank: Normally Open mounting (1) Series SA: 90-280 VAC/DC -B: Normally Closed (for DC control only) DC60 SA 3 K H -B Rated Load Current Thermal Pad 3: 3 Amps Blank: Not Included 5: 5 Amps H: Included Required for valid part number 7: 7 Amps For options only and not required for valid part number Not all part number conbinations are available. * Contact Crydom Technical Support for information on the availability of a specific part number. (2) OUTPUT SPECIFICATIONS Description 3 A 5 A 7 A Recommeded Operating Voltage Vdc 3-48 3-48 3-48 Absolute Maximum Rating Vdc 60 60 60 Maximum Off-State Leakage Current Rated Voltage mA 0.1 0.1 0.1 Maximum Load Current Adc (3) 3 5 7 Minimum Load Current mA 20 20 20 Maximum Surge Current (10 msec) Adc 6 10 14 Maximum On-State Voltage Drop Rated Current Vdc 1 1.2 1.3 Thermal Resistance Junction to Case (Rjc) C/W 2 2 2 Minimum heat sink Ambient (for max current= C/W & Ta) 5 60C 5 60C 5 40C (2) INPUT SPECIFICATIONS Description DC Control AC Control Control Voltage Range 3.5-32 VDC 90-280 VAC/VDC Maximum Reverse Voltage -32 VDC - Minimum Turn-On Voltage (4) 3.5 VDC 90 VAC/VDC Must Turn-Off Voltage (5) 1 VDC 10 VAC/VDC Minimum Input Current (for on-state) 2.2 mA 2 mA Maximum Input Current 25 mA 5.5 mA Nominal Input Impedance Ohms 1500 60K Maximum Turn-On Time msec (6) 0.1 10 Maximum Turn-Off Time msec (7) 0.3 40 FDE-07-01 REV. A Do not forget to visit us at: www.crydom.com Copyright 2020 Crydom Inc. Specifications subject to change without notice.Panel Mount Datasheet (2) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohm Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -30 to 80C Ambient Storage Temperature Range -40 to 125 C Weight (typical) 2.46 oz (70 g) Housing Material UL94 V-0 Baseplate Material Aluminum Input Terminal Screw Torque Range (in-lb/Nm) 13-15 /1.5-1.7 Load Terminal Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2 SSR Mounting Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2 Input/Load Terminal Screw Torque Range (in-lb/Nm) (1) w/K option 8-10 / 0.9-1.13 Humidity 85% non-condensing 21,395,130 hours (2,441 years) MTBF (Mean Time Between Failures) at 40C ambient temperature (8) 11,545,504 hours (1,317 years) MTBF (Mean Time Between Failures) at 60C ambient temperature (8) WIRING DIAGRAM * Inductive loads must be diode suppresed. + + - V * * V Load Load + - + Recommended Wire Sizes Wire Size Wire Pull-Out Terminals (Solid / Stranded) Strength (lb) N 2 24 AWG (0.2 mm ) / 0.2 minimum 10 44.5 Input 2 2 +1 OUTPUT +1 OUTPUT 2 2 x 12 AWG (3.3 mm ) / 3.3 maximum 90 400 S OL I D S T A T E R EL A Y S OL I D S T A T E R EL A Y 2 20 AWG (0.5 mm ) / 0.518 minimum 30 133 4 INPUT +3 4 INPUT +3 Output 2 2 x 10 AWG (5.3 mm ) / 5.3 110 490 2 2 x 8 AWG (8.4 mm ) / 8.4 maximum 90 400 + + V V - - Input Current vs Input Voltage Standard Regulated DC Input 25 EQUIVALENT CIRCUIT BLOCK DIAGRAMS 20 DC60 Series DC Control 15 +DC 3 1 +DC 10 5 Control Trigger Circuit Circuit 0 0 5 10 15 20 25 30 35 DC Input Voltage -DC 4 2 -DC Input Current vs Input Voltage Standard Regulated AC Input 5 DC60 Series AC Control 4.5 4 3 1 AC/DC +DC 3.5 3 2.5 AC/DC Trigger 2 Circuit 1.5 Converter 1 0.5 AC/DC 4 2 -DC 0 0 50 100 150 200 250 300 AC Input Voltage Do not forget to visit us at: www.crydom.com Copyright 2020 Crydom Inc. Specifications subject to change without notice. INPUT INPUT Input Current (mA) Input Current (mA)