DRA1-CMXE100D6 Sensata

DIN Rail Mount DataSheet DRA1 CMX Series 10mm Single Channel DIN Rail Mount SSR Assembly AC Ratings up to 380 VAC and 5 Amps 3-10 and 20-28VDC control Cage style screw terminals for easy connection Fits standard 35mm DIN rail Includes LED Status indicator PRODUCT SELECTION 5 A 6 A Control Voltage 3 A 10 A (5) 10 A (5) 3-10 VDC Control DRA1-CMX200D3 DRA1-CMX60D5 DRA1-CMX100D6 DRA1-CMX60D10 DRA1-CMX100D10 DRA1-CMXE200D3 DRA1-CMXE60D5 DRA1-CMXE100D6 DRA1-CMXE60D10 DRA1-CMXE100D10 20-28 VDC Control OUTPUT SPECIFICATIONS (1) Description 5 A 6 A 3 A 10 A (5) 10 A (5) Operating Voltage VDC 1-200 1-60 1-100 1-60 1-100 100 100 100 (2) Maximum Off-State Leakage Current Rated Voltage Adc 100 100 Maximum Load Current A (3) 3 5 6 10 10 Minimum Load Current A 0 0 0 0 0 0.2 0.1 0.018 Maximum On-State Resistence Ohm 0.04 0.01 60 30 100 100 Maximum Surge Current (10msec) Apk 100 0.5 0.6 0.18 0.1 Maximum On-State Voltage Drop Rated Current VDC 0.24 INPUT SPECIFICATIONS (1) Description DRA1-CMXE DRA1-CMX Control Voltage Range 3.0-10.0 VDC 20.0-28.0 VDC 20.0 VDC Must Turn On Voltage 3.0 VDC Must Turn Off Voltage 1.0 VDC 1.0 VDC Typical Input Current 15 mAdc 5Vdc 12 mAdc 20 Vdc Nominal Input Impedance 780 Ohm 300 Ohm Maximum Turn-On Time msec 1 1 Maximum Turn-Off Time sec 300 300 (1) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength (4) 2500 Vrms 9 Minimum Insulation Resistance ( 500 VDC) (4) 10 Ohm Maximum Capacitance, Input/Output 15 pF Ambient Operating Temperature Range -20 to 80C Ambient Storage Temperature Range -20 to 125 C Weight (typical) 0.063 oz (28.6 g) Encapsulation Thermally Conductive Epoxy GENERAL NOTES (1) All parameters at 25C unless otherwise specied. (2) At 55 Vdc (3) See derating chart on page 3 (4) Dielectric and insulation resistance is measured between input and output (5) Steady state load Current exceeding 10 amps will damage socket. Do not forget to visit us at: www.crydom.com Copyright 2018 Crydom Inc. Specifications subject to change without notice.DIN Rail Mount DataSheet WIRING DIAGRAM (A) Wiring Diagram INPUT OUTPUT 0.20 0.40 5.1 10.2 0.50 (C) 4 2 12.7 (B) LOAD - CONTROL 4 3 2 1 + LOAD (B) (C) 3 + 1+ (A) Wiring diagram is identical for each individual section wheter it is a single or four channel assembly. (B) Load can be placed on either side of Power. (C) DC Inductive loads must be diode supressed to provent damage to SSR. THERMAL DERATE INFORMATION DRA1-CMX Derating Curve CMX(E)10D10 CMX(E)60D10 10 CMX(E)60D6 CMX(E)60D5 8 CMX(E)200D3 6 4 2 0 20 30 40 50 60 70 80 Ambient Temperature (C) Do not forget to visit us at: www.crydom.com Copyright 2018 Crydom Inc. Specifications subject to change without notice. Load Current (Amperes)