DRA1-CX240A5 Sensata

DIN Rail Mount DataSheet DRA1 CX Series 10mm Single Channel DIN Rail Mount SSR Assembly AC Ratings up to 280 VAC and 5 Amps 90-140VAC control Cage style screw terminals for easy connection Fits standard 35mm DIN rail Includes LED Status indicator PRODUCT SELECTION 5 A Control Voltage 5 A DRA1-CX240A5R 90-140 Vrms Control DRA1-CX240A5 OUTPUT SPECIFICATIONS (1) Description DRA1-CX240A5(R) Operating Voltage VAC 12-280 Transient Overvoltage Vpk 600 Maximum Load Current Arms (2) 5 Minimum Load Current Arms 0.06 Maximum Off-State Leakage Current Rated Voltage mArms 0.1 Minimum off-state dv/dt maximum rated voltage V/sec (3) 500 Maximum 1 Cycle Surge Current (50/60 Hz) Apk 239/250 285/260 Maximum It for fusing (50/60 Hz, 1/2 cycle) A sec 1.4 Maximum On-State Voltage Drop Rated Current Vpk INPUT SPECIFICATIONS (1) Description DRA1-CX240A5(R) Control Voltage Range 90-140 Vrms Must Turn On Voltage 90 Vrms 10 Vrms Must Turn Off Voltage Typycal Input Current 10 mA Nominal Input Impedance 14.1K Ohm Maximum Turn-On Time msec 10 Maximum Turn-Off Time sec 40 (1) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohm Maximum Capacitance, Input/Output 10 pF Ambient Operating Temperature Range -30 to 80 C Ambient Storage Temperature Range -30 to 125 C Weight (typical) 0.063 lb (28.6g) Encapsulation Thermally Conductive Epoxy GENERAL NOTES (1) All parameters at 25C unless otherwise specied. (2) See Derating chart on page 3. (3) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.DIN Rail Mount DataSheet MECHANICAL SPECIFICATIONS Tolerances: 0.02 in / 0.5 mm All dimensions are in: inches millimeters CX/CMX Series SSR 2.40 1.71 2.06 61.0 43.3 52.3 1.48 37.7 .39 10.0 3.53 89.6 (A) WIRING DIAGRAM INPUT OUTPUT 4 2 (B) 3+ 1 (A) Wiring diagram is identical for each individual section whether it is a single or four channel assembly. (B) Load can be placed on either side of Power. Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.