DRA1-CXE380D5 Sensata

DIN Rail Mount DataSheet DRA1 CX Series 10mm Single Channel DIN Rail Mount SSR Assembly AC Ratings up to 380 VAC and 5 Amps 3-15 and 15-32VDC control Cage style screw terminals for easy connection Fits standard 35mm DIN rail Includes LED Status indicator PRODUCT SELECTION 5 A 5 A 5 A Control Voltage 5 A 5 A DRA1-CX240D5-B (2) 3-15 VDC Control DRA1-CX240D5 DRA1-CX240D5R DRA1-CX380D5R DRA1-CX380D5 4-15 VDC Control 15-32 VDC Control DRA1-CXE240D5R DRA1-CXE380D5 DRA1-CXE240D5 OUTPUT SPECIFICATIONS (1) Description CX(E)240x5 CX(E)380x5 Operating Voltage VAC 12-280 48-380** Transient Overvoltage Vpk 600 1200 Maximum Load Current Arms (3) 5 5 Minimum Load Current Arms 0.06 0.06 Maximum Off-State Leakage Current Rated Voltage mArms 0.1 0.1 Minimum off-state dv/dt maximum rated voltage V/sec (4) 500 500 Maximum 1 Cycle Surge Current (50/60 Hz) Apk 239/250 239/250 285/260 Maximum It for fusing (50/60 Hz, 1/2 cycle) A sec 285/260 1.4 Maximum On-State Voltage Drop Rated Current Vpk 1.4 INPUT SPECIFICATIONS (1) Description DRA1-CX DRA1-CX240D5-B (2) DRA1-CX380D5 DRA1-CXE Control Voltage Range 3-15 VDC 4-28 VDC 4-15 VDC 15-32 VDC Must Turn On Voltage 3.0 VDC 1.0 VDC 4.0 VDC 15.0 VDC 1.0 VDC 4.0 VDC 1.0 VDC 1.0 VDC Must Turn Off Voltage Typycal Input Current 15 mAdc 10 mAdc 15 mAdc 15 mAdc Nominal Input Impedance 300 Ohm 1360 Ohm 240 Ohm 1500 Ohm 1/2 Cycle 1/2 Cycle 1/2 Cycle 1/2 Cycle Maximum Turn-On Time msec (5) Maximum Turn-Off Time sec 1/2 Cycle 1/2 Cycle 1/2 Cycle 1/2 Cycle (1) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohm Maximum Capacitance, Input/Output 10 pF Ambient Operating Temperature Range -30 to 80 C Ambient Storage Temperature Range -30 to 125 C Weight (typical) 0.063 lb (28.6g) Encapsulation Thermally Conductive Epoxy GENERAL NOTES (1) All parameters at 25C unless otherwise specied. (2) The output is normally closed and does not have a LED status indicator (3) See Derating chart on page 3. (4) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 (5) Turn-on time for DC control random turn-on versions is 0.1 msec **NOTE: Turn-on time for DC control random turn-on versions is 0.1 msec Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.DIN Rail Mount DataSheet MECHANICAL SPECIFICATIONS Tolerances: 0.02 in / 0.5 mm All dimensions are in: inches millimeters CX/CMX Series SSR 2.40 1.71 2.06 61.0 43.3 52.3 1.48 37.7 .39 10.0 3.53 89.6 (A) WIRING DIAGRAM INPUT OUTPUT 4 2 (B) 3+ 1 (A) Wiring diagram is identical for each individual section whether it is a single or four channel assembly. (B) Load can be placed on either side of Power. Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.