DRA1-MCX380D5 Sensata

DIN Rail Mount DataSheet DRA1 MCX Series 10mm Single Channel DIN Rail Mount SSR Assembly AC Ratings up to 380 VAC and 5 Amps 3-15 and 15-32VDC control Cage style screw terminals for easy connection Fits standard 35mm DIN rail Includes LED Status indicator PRODUCT SELECTION 5 A Control Voltage 5 A 3-15 VDC Control DRA1-MCX240D5 DRA1-MCX380D5 4-15 VDC Control 15-32 VDC Control DRA1-MCXE240D5 DRA1-MCXE380D5 OUTPUT SPECIFICATIONS (1) Description MCX(E)240x5 MCX(E)380x5 Operating Voltage VAC 12-280 48-380** 600 1200 Transient Overvoltage Vpk 5 Maximum Load Current Arms (2) 5 Minimum Load Current Arms 0.06 0.06 Maximum Off-State Leakage Current Rated Voltage mArms 0.1 0.1 500 Minimum off-state dv/dt maximum rated voltage V/sec (3) 500 239/250 Maximum 1 Cycle Surge Current (50/60 Hz) Apk 239/250 285/260 Maximum It for fusing (50/60 Hz, 1/2 cycle) A sec 285/260 1.4 Maximum On-State Voltage Drop Rated Current Vpk 1.4 INPUT SPECIFICATIONS (1) Description DRA1-MCX DRA1-MCX380D5 DRA1-MCXE Control Voltage Range 3-15 VDC 4-15 VDC 15-32 VDC Must Turn On Voltage 3.0 VDC 4.0 VDC 15.0 Vrms Must Turn Off Voltage 1.0 VDC 1.0 VDC 1.0 VDC Typical Input Current 15 mAdc 15 mAdc 15 mAdc Nominal Input Impedance 300 Ohm 240 Ohm 1500 Ohm 1/2 Cycle 1/2 Cycle 1/2 Cycle Maximum Turn-On Time msec Maximum Turn-Off Time sec 1/2 Cycle 1/2 Cycle 1/2 Cycle (1) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohm Maximum Capacitance, Input/Output 10 pF Ambient Operating Temperature Range -30 to 80C Ambient Storage Temperature Range -30 to 125 C Weight (typical) 0.08 oz (36.4 g) Encapsulation Thermally Conductive Epoxy GENERAL NOTES (1) All parameters at 25C unless otherwise specied. (2) See derating chart on page 3. (3) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 **NOTE: Voltages in excess of 380V will damage output terminals. Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.DIN Rail Mount DataSheet WIRING DIAGRAM (A) Wiring Diagram INPUT OUTPUT 0.20 0.40 5.1 10.2 0.50 4 2 12.7 (B) LOAD CONTROL 4 3 2 1 POWER 3 + 1 (A) Wiring diagram is identical for each individual section wheter it is a single or four channel assembly. (B) Load can be placed on either side of Power. MECHANICAL SPECIFICATIONS Tolerances: 0.02 in / 0.5 mm All dimensions are in: inches millimeters MCX/MP Series SSR 2.45 1.71 62.2 43.3 2.06 52.3 1.48 37.7 .39 10.0 3.53 89.6 Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.