DRA4-MCX240D5 Sensata

DIN Rail Mount DataSheet DRA4 MCX Series 54mm Four Channel DIN Rail Mount SSR Assembly AC Ratings up to 280 VAC and 5 Amps 3-15 and 15-32VDC control Cage style screw terminals for easy connection Fits standard 35mm DIN rail Includes LED Status indicator PRODUCT SELECTION Control Voltage 5 A 3-15 VDC DRA4-MCX240D5 15-32 VDC DRA4-MCXE240D5 (1) OUTPUT SPECIFICATIONS Description DRA4-MCX(E)240x5 Operating Voltage VAC 12-280 Transient Overvoltage Vpk 600 Maximum Load Current Arms (2) 5 Minimum Load Current Arms 0.06 0.1 Maximum Off-State Leakage Current Rated Voltage mArms Minimum off-state dv/dt maximum rated voltage V/sec (3) 500 Maximum 1 Cycle Surge Current (50/60 Hz) Apk 239/250 285/260 Maximum It for fusing (50/60 Hz, 1/2 cycle) A sec Maximum On-State Voltage Drop Rated Current Vpk 1.4 (1) INPUT SPECIFICATIONS Description DRA4-MCX DRA4-MCXE Control Voltage Range 3-15 VDC 15-32 VDC Must Turn On Voltage 3.0 VDC 15.0 VDC Must Turn Off Voltage 1.0 VDC 1.0 VDC 15 mAdc Typical Input Current 15 mAdc 300 Ohm Nominal Input Impedance 1500 Ohm Maximum Turn-On Time msec 1/2 Cycle 1/2 Cycle Maximum Turn-Off Time sec 1/2 Cycle 1/2 Cycle GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohms Maximum Capacitance, Input/Output 10 pF Ambient Operating Temperature Range -40C to 80C Ambient Storage Temperature Range -40C to 125C Status Indicating Display 0.32 lb (145.5g) Weight (typical) Themally Conductive Epoxy GENERAL NOTES 1) All parameters at 25C unless otherwise specied. 2) See derating chart on page 3 3) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.DIN Rail Mount DataSheet THERMAL DERATE INFORMATION DRA4-MCX Derating Curve 5 4 DRA4-MCX 3 2 1 0 20 30 40 50 60 70 80 Ambient Temperature (C) WIRING DIAGRAM (A) Wiring Diagram INPUT OUTPUT 0.20 0.40 5.1 10.2 0.50 4 2 12.7 (B) LOAD CONTROL 4 3 2 1 POWER 3 + 1 (A) Wiring diagram is identical for each individual section wheter it is a single or four channel assembly. (B) Load can be placed on either side of Power. Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice. Load Current (Amperes)