DRA-CN240A05 Sensata

DIN Rail Mount DataSheet AC DC DRACN Series 6.2mm Din-Rail Mount (35 mm) SSR Assembly Ratings 24VDC 3.5A, 48VDC 100mA and 240VAC 2A UL & cUL recognized 40C, 100K-Cycle Endurance Test (SSR Only) AC output SSR is UL rated for Pilot Duty 240VAC CE & RoHS Compliant Yellow LED input status indicator 5 & 24 VDC Control PRODUCT SELECTION Control Voltage 3.5 A 100 mA 2 A DRA-CN048D05 3-12 VDC DRA-CN024D05 DRA-CN240A05 15-30 VDC DRA-CN024D24 DRA-CN048D24 DRA-CN240A24 AVAILABLE OPTIONS Load Voltage Switching Mode 024D: 24 VDC, 3.5 A Blank: Zero Cross 048D: 48 VDC, 0.1 A Turn-On (AC Output Only) 240A: 240 VAC, 2 A R: Random Turn On Series (AC Output Only) DRA-CN 4 024D D Assembly Input Voltage 05: 05 VDC 24: 24VDC Required for valid part number For options only and not required for valid part number (1) OUTPUT SPECIFICATIONS DRA-CN024DXX DRA-CN048DXX DRA-CN240AXX Description 0-48 VDC Operating Voltage 0-24 VDC 24-250 VAC 100 mA Maximum Load Current 40C (2) 3.5 A 2 A 1 Minimum Load Current mA 1 70 60 VDC Maximum Blocking Voltage 30 VDC 600 VAC 300 mA (10 ms) Maximum Surge Current Apk 9 A (10 ms) 120/115 A (16.6/20 ms) N.A. Maximum It for fusing 50/60Hz (1/2 cycle) A sec N.A. 285/260 1.0 Typical On-State Voltage Drop Rated Current (V) 0.4 1.1 Maximum Off-State Leakage Current Rated Voltage mA 0.001 0.001 4.0 500 Maximum PWM (Hz) (3) 500 N.A. Switch Conguration N.O. N.O. N.O. (1) INPUT SPECIFICATIONS for CN024 Description DRA-CN024D05 DRA-CN024D24 Control Voltage Range 3-12 VDC 15-30 VDC Minimum Turn-On Voltage 3.0 VDC 15 VDC Must Turn-Off Voltage 1.0 VDC 15 VDC Nominal Input Impedance 500 Ohm 2.67K Ohm Typical Input Current 10 mA 5.0 VDC 7 mA 24 VDC Typical Turn-On Time 120 s 350 s Typical Turn-Off Time 120 s 80 s FDE-07-01 REV. A Do not forget to visit us at: www.crydom.com Copyright 2018 Crydom Inc. Specifications subject to change without notice.DIN Rail Mount DataSheet (1) INPUT SPECIFICATIONS for CN048 Description DRA-CN048D05 DRA-CN048D24 15-30 VDC Control Voltage Range 3-12 VDC Must Turn On Voltage 15 VDC 3.0 VDC Must Turn Off Voltage 1.0 VDC 5 VDC Nominal Input Impedance 833 Ohm 3.43K Ohm Typical Input Current 6 mA 5.0 VDC 7 mA 24 VDC 20 s Typical Turn-On Time 20 s Typical Turn-Off Time 130 s 130 s (1) INPUT SPECIFICATIONS for CN240 Description DRA-CN240A05 DRA-CN240A24 Control Voltage Range 3-12 VDC 15-30 VDC Must Turn On Voltage 3.0 VDC 15 VDC Must Turn Off Voltage 1.0 VDC 5 VDC Nominal Input Impedance 333 Ohm 3.43K Ohm Typical Input Current 15 mA 5.0 VDC 7 mA 24 VDC Typical Turn-On Time 1/2 Cycle 1/2 Cycle 1/2 Cycle Typical Turn-Off Time 1/2 Cycle GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output (50/60Hz) (5) 2.5 KV Maximum Capacitance, Input/Output 1.5 pF Ambient Operating Temperature Range -25 to 60C Ambient Storage Temperature Range -40 to 80C Weight (typical) 0.067 lb (31g) Housing Material UL 94 V0 Overvoltage Category III Polution Degree 2 Degree of protection (SSR Encapsulation) IP67 Max. Torque (output screws) 5-7 in lb (0.56-0.8 Nm) Max. Wire Size (load side) 24-14 AWG Solid or Stranded GENERAL NOTES (1) All parameters at 25C unless otherwise specied. (2) See derate curves for more information (3) Operating frequency above 500Hz will damage the SSR (DC output only). (4) Turn-on time for random turn-on version is 0.1msec (5) 3.75KV for CN048Dxx Do not forget to visit us at: www.crydom.com Copyright 2018 Crydom Inc. Specifications subject to change without notice.