Panel Mount
Datasheet
HA / HD60 Series
Ratings from 25A to 125A @ 48-660 VAC AC or DC control
SCR output for heavy industrial loads Direct bond copper substrate
Zero Voltage or instantaneous turn-on outputs EMC compliant to Level 3
UL/CSA/VDE Approved, CE Compliant to EN60950-1 Direct power lead frame
Improved SEMS screw and washer Epoxy free design
Redesigned housing with anti-rotation barriers
For Generation 3 datasheet click here
PRODUCT SELECTION
Control Voltage 25A 50A 90A 125A
4-32 VDC HD6025 HD6050 HD6090 HD60125
90-280 Vrms HA6025 HA6050 HA6090 HA60125
18-36 Vrms HA6025E HA6050E HA6090E HA60125E
AVAILABLE OPTIONS
Control Voltage
A: 90-280 VAC Overvoltage Protection Thermal Pad
D: 4-32 VDC Blank: Not Included Blank: Not Included
Series AxxxxE: 18-36 VAC P: Included (3) H: Included
H A 60 25 E K P G H -10
Switching Type
Operating Rated Load Current Termination Input Status LED
Voltage 25: 25 Amps Blank: Screw Blank: Not Included Blank: Zero Voltage Turn-On
60: 48-660 VAC 50: 50 Amps F: Quick Connect G: Included -10: Instantaneous Turn-On(4)
(1)
90: 90 Amps (Up to 50 Amps models)
125: 125 Amps K: Hex standoffs (2)
Required for valid part number
For options only and not required for valid part number
* Not all part number combinations are available.
Contact Crydom Technical Support for informacion on
the availability of a specific part number.
(5)
OUTPUT SPECIFICATIONS
Descrption 25A 50A 90A 125A
Operating Voltage (47-440Hz) [Vrms] 48-660 48-660 48-660 48-660
Transient Overvoltage [Vpk] 1200 1200 1200 1200
Maximum Off-State Leakage Current @ Rated Voltage [mArms] 1.0 1.0 1.0 1.0
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/sec] 500 500 500 500
Maximum Load Current [Arms] (2)(6) 25 50 90 125
Minimum Load Current [mArms] 150 150 150 150
Maximum 1 Cycle Surge Current (50/60Hz) [Apk] 235/250 597/625 1145/1200 1670/1750
Maximum On-State Voltage Drop @ Rated Current [Vrms] 1.15 1.15 1.15 1.15
Thermal Resistance Junction to Case (Rjc) [C/W] 0.8 0.45 0.27 0.22
Maximum 1/2 Cycle I t for Fusing (50/60Hz) [A sec] 285/259 1770/1629 6560/5976 13950/12709
Minimum Power Factor ( at Maximum Load) (3) 0.5 0.5 0.5 0.5
Do not forget to visit us at: www.crydom.com
Copyright 2016 Crydom Inc. Specifications subject to change without notice.Panel Mount
Datasheet
(5)
INPUT SPECIFICATIONS
Description HD60xx HA60xx HA60xxE
Control Voltage Range 4-32 VDC 90-280 Vrms 18-36 Vrms
Minimum Turn-On Voltage 4.0 VDC (7) 90 Vrms 18 Vrms
Must Turn-Off Voltage 1.0 VDC 10 Vrms 4.0 Vrms
Maximum Reverse Voltage -32 VDC - -
Minimum Input Current 7.0 mA 5 mA 16 mA
Maximum Input Current 12 mA 10 mA 20 mA
Nominal Input Impedance Current Regulated
(8)
Maximum Turn-On Time [msec] 1/2 Cycle 20 20
Maximum Turn-Off Time [msec] 1/2 Cycle 30 30
(5)
GENERAL SPECIFICATIONS
Description Parameters
Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms
9
Minimum Insulation Resistance (@ 500 VDC)
10 Ohm
Maximum Capacitance, Input/Output 8 pF
Ambient Operating Temperature Range -40 to 80 C
Ambient Storage Temperature Range -40 to 125 C
Weight (typical) 2.6 oz (74.9 g)
Housing Material UL94 V-0
Baseplate Material Aluminum
Input Terminal Screw Torque Range (in-lb/Nm) 13-15 /1.5-1.7
Load Terminal Screw Torque Range (in-lb/Nm) 18-20 / 2.0-2.2
SSR Mounting Screw Torque Range (in-lb/Nm) 18-20 / 2.0-2.2
Input/Load terminal Screw Torque Range (in-lb/Nm) (2) w/K option 8-10 / 0.9-1.13
Input/Output Terminal Screw Thread Size #6-32 UNC / #8-32 UNC
Humidity per IEC60068-2-78 93% non-condensing
LED Input Status Indicator w/G option (green)
11,641,553 hours (1,328 years)
MTBF (Mean Time Between Failures) at 40C ambient temperature (9)
7,210,376 hours (823 years)
MTBF (Mean Time Between Failures) at 60C ambient temperature (9)
WIRING DIAGRAM
AC
Input Current vs Input Voltage
Recommended Wire Sizes
V
Standard Regulated DC Input
Wire Size Wire Pull-Out
25
Terminals
(Solid / Stranded) Strength (lb)[N]
(10)
Load
20
2
24 AWG (0.2 mm ) / 0.2 [minimum] 10 [44.5]
Input
1 ( ) 2 ( )
15
2
2 x 12 AWG (3.3 mm ) / 3.3 [maximum]
90 [400]
2
10
20 AWG (0.5 mm ) / 0.518 [minimum] 30 [133]
2
Output
2 2 x 10 AWG (5.3 mm ) / 5.3 110 [490] 5
1 OUTPUT
S OL I D S T A T E R EL A Y
2
2 x 8 AWG (8.4 mm ) / 8.4 [maximum] 90 [400]
0
0 5 10 15 20 25 30
4
INPUT 3
DC Input Voltage
4 ( / ) 3 (+ / )
EQUIVALENT CIRCUIT BLOCK DIAGRAMS
Diagram: HD60xx Diagram: HAxxxx
4 1 4 1
-DC AC AC AC
Current
Limiter
(11)
Trigger AC/DC
(12) Trigger (12)
Converter
Circuit Circuit
(11)
+DC 3 2 AC
AC 3 2 AC
Current
Limiter
Do not forget to visit us at: www.crydom.com
Copyright 2016 Crydom Inc. Specifications subject to change without notice.
Input Current (mA)