HS501DR-D2D07 Sensata

DIN Rail Mount DataSheet HS501DR Series Assemblies 10 amp AC output 40C Single Channel output 3 to 32 VDC input control voltage DIN Rail mounted uL, CSA, VDE, CE approved SSRs Epoxy free design PRODUCT SELECTION Description 10A 10A 3-32 VDC Control HS501DR-D2425 HS501DR-HD6025 (1) OUTPUT SPECIFICATIONS Description HS501DR-D2425 HS501DR-HD6025 Operating Voltage (47-63Hz) Vrms 24-280 48-660 Transient Overvoltage Vpk 600 1200 Maximum Off-State Leakage Current Rated Voltage mArms 1.0 1.0 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (2) 500 500 Maximum Load Current Arms 10 10 Minimum Load Current Arms 150 150 Maximum Surge Current (16.6ms) Apk 250 250 Maximum On-State Voltage Drop Rated Current Vac 1.15 1.15 Maximum It for Fusing (8.3 msec) A sec 260 260 Minimum Power Factor (with Maximum Load) 0.5 0.5 (1) INPUT SPECIFICATIONS Description HS501DR-D2425 HS501DR-HD6025 Control Voltage Range 3-32 VDC 4-32 VDC Minimum Turn-On Voltage 3.0 VDC 4.0 VDC Minimum Turn-Off Voltage 1.0 VDC 1.0 VDC Maximum Reverse Voltage -32 VDC -32 VDC Minimum Input Current 7.0 mA 7.0 mA Maximum Input Current 12 mA 12 mA Nominal Input Impeadance Current Regulated Current Regulated Maximum Turn-On Time msec 1/2 Cycle 1/2 Cycle Maximum Turn-Off Time msec 1/2 Cycle 1/2 Cycle GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance ( 500 V DC) 10 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -40 to 80C Ambient Storage Temperature Range -40 to 125C Status Indicator Display None Weight (typical) 0.28 lb. (128 g) Recommended Terminal Screw Torque Range: (in-lb/Nm) 6-32 Screws - 13-15/1.5-1.7. 8-32 Screws - 18-20/2-2.2. (Screws dry without grease) Thermal pad installed Yes GENERAL NOTES (1) All parameters at 25C unless otherwise specied. (2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.DIN Rail Mount DataSheet MECHANICAL SPECIFICATIONS 2.57 1.74 3.10 1.46 1.41 THERMAL DERATE INFORMATION HS501DR w/25A SSR 10 8 6 4 2 0 0 10 20 30 40 50 60 70 80 Ambient Temperature (C) AGENCY APPROVALS Agency approvals are for relay only. E116949 LR81689 10143 UG (Not Applicable: -B and 4D) Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice. Load Current (Amps)