IPS-M12 Series Industrial Pressure Sensor - Ceramic - with M12 4-Pin Connector Piezo-resistive thick film ceramic sensor Stainless steel body Accuracy <0.25% FS BFSL 0-5V or 4-20mA output Pressure ranges from -1 to 400 bar M12 4-pin connector The IPS-M12 series is suitable for use in a wide range of industrial applications. The probe uses a piezo-resistive ceramic sensor giving excellent media compatibility, within a stainless steel housing The electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving stable electronics, especially industrial applications.. Each device is temperature compensated, calibrated and supplied with a traceable serial number and calibration data.* Mating cable and plug assemblies are available - see datasheet M12 Cable Set Series Performance Electrical Protection Accuracy (Non-Linearity & Hysteresis) <0.25% / FS (BFSL) Supply reverse polarity No damage/no function Electromagnetic compatibility CE Compliant Setting Errors (offsets) 2-wire Zero & Full Scale, <0.5% / FS 3-wire Zero & Full Scale, <0.5% / FS Material Specifications Mechanical Stability Housing 316L Stainless Steel Shock 100g / 11s O ring seals Viton Vibration 10g RMS (20 - 2000Hz) Diaphragm Ceramic Al O 96% 23 Temperatures & Thermal Effects Media wetted parts Housing & connection, O ring seal, Media Temperature -40C to +135C diaphragm Ambient Temperature -20C to +80C Weight Approx 100g Storage temperature -40C to +125C Installation position Any Compensated temperature range +20C to +80C 6 Operational Life > 100x 10 cycles Thermal Zero Shift (TZS) <0.04% /FS/C Insulation resistance > 50MOhms at 50Vdc Thermal Span Shift <0.015% /C Environmental protection IP67 (when used with a similarly rated connector) Pressure Ranges and Passive mV/V Outputs Nominal Pressure, Gauge, bar 1 2 5 10 20 50 100 250 400 Compound range bar -0.5 to 0 -0.5 to 2 -1 to 5 -1 to 9 -1 to 19 -1 to 24 Permissible Overpressure bar 2 4 10 20 40 100 200 400 650 Burst Pressure bar 4 5 12 25 50 120 250 500 650 Output Signals and Supply Voltages Wire system Output Supply Voltage Connection Pin Nos 2-wire 4-20mA 9-32Vdc +ve Supply Pin 1 -ve Supply Pin 2 Ground Earth Pin 3-wire 0-5Vdc 9-32Vdc +ve Supply Pin 1 -ve Supply Pin 2 Output Pin 3 Earth Pin 4 *Calibration data is supplied as a sticker affixed to the product packaging - do not discard Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:sales cynergy3.com ISO9001 CERTIFIED www.cynergy3.com Made in the UK IPS-M12 2018 2018 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.IPS-M12 Series Industrial Pressure Sensor - Ceramic - with M12 4-Pin Connector PartNumber PressureRating Output IPS-G1000-5M12 0-1BarG 4-20mA IPS-G1000-6M12 0-1BarG 0-5V IPS-G6000-5M12 0-6BarG 4-20mA IPS-G6000-6M12 0-6BarG 0-5V IPS-GM1P9-5M12 -1to+9BarG 4 - 20mA IPS-GM1P9-6M12 -1to+9BarG 0-5V IPS-G1002-5M12 0-10BarG 4-20mA IPS-G1002-6M12 0-10BarG 0-5V IPS-G1602-5M12 0-16barG 4-20mA IPS-G1602-6M12 0-16barG 0-5V IPS-C0184-5M12 -1to+24BarG 4-20mA IPS-C0184-6M12 -1to+24BarG 0-5V IPS-G2502-5M12 0-25BarG 4-20mA IPS-G2502-6M12 0-25BarG 0-5V IPS-G4002-5M12 0-40BarG 4-20mA IPS-G4002-6M12 0-40BarG 0-5V IPS-G1003-5M12 0-100BarSG* 4-20mA IPS-G1003-6M12 0-100BarSG* 0-5V IPS-G2503-5M12 0-250BarSG* 4-20mA IPS-G2503-6M12 0-250BarSG* 0-5V IPS-G4003-5M12 0-400BarSG* 4-20mA IPS-G4003-6M12 0-400BarSG* 0-5V *sealedgauge Mechanical Dimensions Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:sales cynergy3.com www.cynergy3.com ISO9001 CERTIFIED 2018 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.